Boiler and cooker stoker course

boiler stoker

The Operators' Training Centre has a course in boiler and central heating furnace stoker in its training offer. We guarantee thorough training in the operation and supervision of central heating boilers, as well as auxiliary (control and measurement) equipment. This knowledge also overlaps with the requirements for the operation of regular furnaces, steam boilers, CO gas boilers as well as water scaffolding. You will find our full range of services on our website, as well as information about the organisation under FAQ. If you have any further questions, we encourage you to contact our consultants by telephone. 

Curriculum 

At OSO, we strive to provide the right course of study for our trainees, i.e. comprehensive training covering both theoretical knowledge and practical skills. Groups are organised according to the results obtained in the initial competency test. In this way, they are made up of participants with a similar level of knowledge, so that we are able to provide the most necessary knowledge for our client, relevant to the skills they have. 

Knowledge Skills 
Proper control of the operation of exhaust and flue gas cleaning equipment Reading the indicators of the control and measurement apparatus 
Maintenance (supervision) of boilers and control, safety, auxiliary equipment Monitoring of the complete boiler operation from start-up 
Thermal technology news Monitoring systems for temperature, pressure, fuel supply 
Responsibilities of the position Monitoring of air draft meters 
Health and safety rules in the operation of thermal equipment Supervision of control and measurement equipment 
Diagram of a central heating boiler room Fire protection, emergency medical services 
Features of steam and water boilers - we present the general knowledge needed for proper and safe operation Application of acquired knowledge in the operation of industrial steam equipment 
Instruction in the operation of networks as well as thermal installations Operation of boilers 
Knowledge of solid fuels, liquid fuels Organisation of work on thermal equipment 
Knowledge of fittings and materials Correct reading of equipment instructions 
General provisions and selected problematic issues The use of water in thermal management 

What do we require? 

This is a minimum of eighteen years of age, at least primary school education and a health certificate issued by an occupational physician certifying that you can actively participate in the course. 

Our offer and how to get your G2/E qualification  

Together with OSO, you can count on competitive prices, a wide range of training courses and professionalism in the education of our course participants. We have highly qualified staff with many years of training and professional experience. We provide lectures in the form of webinars - real-time audio-video transmissions - as well as exercises in a training facility prepared for this purpose that meets all requirements. In order to consolidate the knowledge of our trainees, we supply them with the necessary materials by e-mail and also send them repetition tests. In this way, we aim to prepare the trainee for the examination that crowns our course, which is conducted by the qualification board of the Energy Regulatory Office (ERO). A positive result from the exam results in the G2/E certificate required to start working as a CO burner. 

Boiler and cooker burner 

CSO logo

A central heating stoker deals with the operation of central heating furnaces and boilers. These are appliances whose function is to supply heat, hot water and process steam to residential and industrial buildings. Our aim is to provide the necessary knowledge for certification and to train future employees responsible for the operation of boilers and furnaces. In order to provide our trainees with the best possible education, we ensure that they consolidate their knowledge with the help of additional material in the form of short tests. In this way, our customers not only acquire knowledge in class, but also at home. 

Central heating boilers - unit characteristics 

In order to provide an efficient yet safe way to heat residential or office buildings, central heating boilers are used which, due to the different needs of the users, differ in the way they are installed. The boiler stoker has the skills to carry out the correct, and at the same time safe, installation of the boiler. The installation and supervision of the boiler, should be carried out by a person who is familiar with the equipment and who has completed courses providing them with the necessary knowledge of safety rules. In spite of the technological improvements made to the boilers, their continued operation without monitoring could lead to failure (explosion or asphyxiation). It is therefore correct and sensible to entrust both the installation and the supervision to a person qualified to do so, with the necessary authorisation, which we help to obtain.  

We teach our trainees how to use numerous safety features, such as automated fuel metering, which is designed to facilitate the operation of the boiler, ensuring the safety of users. In this way, a person who is familiar with the regulations in force, as well as possessing the necessary skills, is able to ensure the safe and functional operation of the equipment in question. 

central heating boilers

Health and Safety 

A correct heating system should be installed on a non-combustible base, and likewise its surroundings should be free of flammable materials to prevent a fire from breaking out. Health and safety rules include correct operation of the appliance and its maintenance - regular cleaning of the boiler and flue pipes, also in the case of heating boilers, it is mandatory to remove soot from the chimney. Cyclical chimney inspections and proper ventilation prevent the boiler room from being smoky. Chad is the main danger for the CO burner, so it is advisable to permanently open the supply duct. Boilers should be inspected periodically to avoid unexpected accidents during operation. Any faults noticed should be reported immediately to the supervisor and the services of heating equipment repair specialists can be used. We warmly invite you to cooperate with OSO. 

We offer open and closed training throughout Poland, please contact us telephone to register for training. 

SEP-G2 course
WP_Query Object ( [query] => Array ( [posts_type] => page [posts_per_page] => -1 [child_of] => 2529 [order] => ASC [orderby] => menu_order )[query_vars] => Array ( [posts_type] => page [posts_per_page] => -1 [child_of] => 2529 [order] => ASC [orderby] => menu_order [error] => [m] => [p] => 0 [post_parent] => [subpost] => [subpost_id] => [attachment] => [attachment_id] => 0 [name] => [pagename] => [page_id] => 0 [second] => [minute] => [hour] => [day] => 0 [monthnum] => 0 [year] => 0 [w] => 0 [category_name] => [tag] => [cat] => [tag_id] => [author] => [author_name] => [feed] => [tb] => [paged] => 0 [meta_key] => [meta_value] => [preview] => [s] => [sentence] => [title] => [fields] => [menu_order] => [embed] => [category__in] => Array ( )[category__not_in] => Array ( )[category__and] => Array ( )[post__in] => Array ( )[post__not_in] => Array ( )[post_name__in] => Array ( )[tag__in] => Array ( )[tag__not_in] => Array ( )[tag__and] => Array ( )[tag_slug__in] => Array ( )[tag_slug__and] => Array ( )[post_parent__in] => Array ( )[post_parent__not_in] => Array ( )[author__in] => Array ( )[author__not_in] => Array ( )[search_columns] => Array ( )[ignore_sticky_posts] => [ignore_sticky_posts] => [suppress_filters] => [cache_results] => 1 [update_post_term_cache] => 1 [update_menu_item_cache] => 1 [lazy_load_term_meta] => 1 [update_post_meta_cache] => 1 [nopaging] => 1 [comments_per_page] => 50 [no_found_rows] => )[tax_query] => WP_Tax_Query Object ( [queries] => Array ( )[relation] => AND [table_aliases:protected] => Array ( )[queried_terms] => Array ( )[primary_table] => wp_posts [primary_id_column] => ID )[meta_query] => WP_Meta_Query Object ( [queries] => Array ( )[relation] => [meta_table] => [meta_id_column] => [primary_table] => [primary_id_column] => [table_aliases:protected] => Array ( )[clauses:protected] => Array ( )[has_or_relation:protected] =>. )[date_query] => [request] => SELECT wp_posts.* FROM wp_posts WHERE 1=1 AND ((wp_posts.post_type = 'page' AND (wp_posts.post_status = 'publish'))) ORDER BY wp_posts.menu_order ASC [posts] => Array ( [0] => WP_Post Object ( [ID] => 2823 [post_author] => 6 [post_date] => 2023-03-21 17:42:20 [post_date_gmt] => 2023-03-21 16:42:20 [post_content] =>

Become a mobile crane operator 

mobile crane on the road

OSO Operator Training Centre is a company that has been providing training and courses for employees working with large-scale equipment for years. Our courses offer instruction in controlling overhead cranes, forklifts, hoists, cranes and many other machines. We provide comprehensive classes with some of the most qualified professionals. 

General overview of the training 

The courses are based on standards that comply with the law, i.e. the requirements of the UDT. Training is conducted in a friendly atmosphere by some of the best specialists in the field. The basic idea is to prepare the trainees not only for their daily duties, but also for the challenges associated with the specifics of the profession.

The training consists of both theoretical and practical parts. It includes classes on: 

  • types of cranes,  
  • health and safety regulations, 
  • mechanical engineering, 
  • lifting tasks, 
  • the rules for transporting the different types of material, 
  • equipment maintenance. 

In order to obtain an operator's licence, it is required to pass a special examination before a board consisting of representatives of the Office of Technical Inspection.   

Crane - what does it mean?  

mobile crane at work

Cranes include a wide group of machines, also functioning under the name of crane equipment, whose task is to move materials and bulky goods. Of course, cranes vary in type, so loads can be moved by platforms as well as by various types of hoists or jacks. Cranes, like many other similar machines, are subject to the Office of Technical Inspection, so a licence is needed to operate them.  

Requirements for those interested in the course  

To join the course you must:   

  • be of legal age,   
  • obtain a certificate from a doctor that there are no contraindications to practising the profession,  
  • have at least a primary school education. 

Location of training 

Training courses are held both in Warsaw at our central location and in branches located in cities throughout Poland. If the client expresses an interest, we are ready to carry out the classes with travel to the client. The course can take the form of both a closed course - intended for the whole company - and an open one, in which everyone can take part individually.  

The current price list and schedule are available on our website. However, the price is dependent on the interest in a particular course. 

Why us? 

mobile crane with hook

By completing our training course, you can easily obtain a position as a mobile crane operator. The graduate of our course should be able to handle the equipment without any problems. The skills acquired during the course should also provide a solid basis for expanding your knowledge when working with other heavy equipment as well. 

Post-course work  

Once all the necessary documents and licences have been acquired, the trainee should have no problem finding a job in any industry that uses cranes. These machines are primarily used to move material and tools, so they are very often used at construction sites of all kinds. They are also useful in factories and production halls, as well as warehouses. They are also used in transport and heavy industry, such as shipyards. Some cranes are also used in marketing (hanging advertisements), telecommunications and tree felling.  

QUESTIONS FROM STUDENTS

Our training courses consist of both theoretical and practical parts. The classes comprehensively prepare you to operate the equipment in question.  

No. Participants in the course do not need to have more than a primary school education. Instead, they must be of legal age and have the appropriate medical certificate. 

[post_title] => Mobile crane training - cranes [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => training-from-operating-a-crane-crane [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:32:06 [post_modified_gmt] => 2023-03-22 14:32:06 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2823 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[1] => WP_Post Object ( [ID] => 2061 [post_author] => 3 [post_date] => 2021-10-28 10:01:16 [post_date_gmt] => 2021-10-28 10:01:16 [post_content] => Training for forklifts takes place in our training hall in Warsaw on our forklifts or on the premises of the client's company. The course organized by our center consists of parts:
  • Theoretical
  • Practical
  • UDT exam
All parts of the course take place in our training hall in Warsaw or at the client's company - free travel to the client. The forklift on which the UDT exam will be carried out must have a valid UDT decision. Training for an operator and a forklift maintenance technician always ends with a state examination. Our trainers thoroughly prepare for passing the UDT exam, both in theoretical and practical parts.

Who needs a forklift license?

The course is aimed at people who want to develop personally, earn better and have an interesting job. If you would like to become a specialist in servicing a forklift truck confirmed with UDT authorizations, we invite you to our training.

Price of training for a forklift truck

The current price of the forklift training is determined by phone.
Please contact us at:

Each forklift course carries the following information for the operator's position:

  • supervision of technical devices
  • construction and operation of devices
  • operator's duties at the workplace
  • principles of occupational health and safety
  • practical exercises
When it comes to forklifts, our course is not only rich in theory, but also classes with the use of devices as part of practical exercises. During them, participants can apply the acquired knowledge and learn how to correctly and safely operate the devices at the workplace. After graduation, participants take the exam, receive a certificate of completion of training for a forklift truck and the authorization to operate the devices issued by the Office of Technical Inspection (UDT).

Requirements

The forklift course is intended for people who meet the following requirements:
  • are over 18 years of age
  • have completed at least primary school
  • have no medical contraindications to work as an operator

Where do we operate

We carry out forklift courses in Poland and in any place indicated by our clients - we travel to places all over the country. The main seat of our Center is Warsaw. [post_title] => Forklift truck course with UDT exam in Warsaw [post_excerpt] => [post_status] => [post_excerpt [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => operator-truck-idler [to_ping] => [pinged] => [post_modified] => 2021-10-28 14:02:41 [post_modified_gmt] => 2021-10-28 14:02:41 [post_content_filtered] =>. [post_parent] => 0 [guid] => https://oso.edu.pl/?page_id=2061 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[2] => WP_Post Object ( [ID] => 1550 [post_author] => 3 [post_date] => 2017-12-06 16:13:06 [post_date_gmt] => 2017-12-06 16:13:06 [post_content] =>

G1, G2, G3 courses

The OSO Operators Training Centre has prepared a wide range of courses for those wishing to obtain qualifications. Our classes are aimed at all those who want to successfully pass the exam before the examination board of their choice, e.g. (SEP, PSE, SIMP, SITPS). With us it is not a problem!According to the regulations, persons wishing to work in the operation and supervision of equipment, installations and networks in the field of electrical energy, heat and gaseous fuels must hold the relevant qualification certificate, which is also referred to as G1, G2, G3 certificate. Obtaining them with our Centre is no problem at all, as we have many years of experience in this field and provide all of our clients with a service of the highest quality.

Our offer

We provide training in three categories: G1, G2 and G3, and within them for supervisory positions and operating positions.
  • G1 - electrical training for devices, installations and power networks
  • G2 - thermal training conducted on devices, installations and heat networks
  • G3 - gas trainings conducted on devices, installations and gas networks
The course includes theoretical classes that take place in our Center, as well as in other locations, as agreed with the clients.

Topics of classes

The classes provide participants with a wide range of knowledge on how to carry out work safely and prepare them to take the exam before the certification boards of SEP, PSE, SIMP, SITPS and others throughout Poland.Topics are tailored to the scope of the course. The main topics covered during the course include: construction and operation of electrical, heat and gas equipment, networks and installations, elements of energy law and other regulations, carrying out inspection and measurement work, principles of rational and safe use of equipment, networks and installations of the above mentioned types.

Where do we operate

Persons wishing to obtain electrical qualifications up to 1 kV and other qualifications issued by authorized examination boards can take advantage of our offer in the following cities: Warsaw, Kraków, Bielsko-Biała and Katowice. Classes are conducted according to the schedule presented on our website.

We train professionally and at an affordable price

Our OSO Operator Training Centre provides a top-notch service - professional, comprehensive and competitive. When you are also interested in the price for G1, G2, G3 licences - at our centre it is very attractive. Moreover, we are ready to negotiate.Many customers from many places in the country have already used our services. We hope that you will also be satisfied.We invite you to take courses at the OSO Centre - Warsaw, Katowice, Bielsko-Biała, Krakow - sign up now! [post_title] => G1, G2, G3 entitlements - sign up for a course at OSO! [post_excerpt] =>. [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => sep-g1-g2-g3 [to_ping] => [pinged] => [post_modified] => 2022-07-07 22:08:03 [post_modified_gmt] => 2022-07-07 22:08:03 [post_content_filtered] => [post_parent] => 22 [guid] => https://oso.edu.pl/?page_id=1550 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[3] => WP_Post Object ( [ID] => 1552 [post_author] => 3 [post_date] => 2017-12-06 16:14:43 [post_date_gmt] => 2017-12-06 16:14:43 [post_content] =>

G1 courses

You are invited to enrol on the G1 - Electrical Power Engineering course, which is designed for electricians and others working with equipment, installations and networks that generate, process, transmit and consume electricity in their operation, maintenance, repair, assembly, inspection and measurement work.At our CSO Centre, we provide our trainees with comprehensive and professional preparation - we have many years of experience and are focused on customer satisfaction. We hope that we can meet your requirements as well.The G1 training course is designed to provide you with knowledge of the requirements for the operation and supervision of electrical equipment, installations and networks up to and above 1 kV. It enables you to obtain the so-called "G1" licence 1kV.

G1 permissions are needed for:

  • devices, installations and power networks with a voltage of not more than 1 kV
  • devices, installations and networks with a rated voltage above 1 kV
  • generating devices connected to the national power grid, regardless of the level of the rated voltage
  • electric traction network
  • generating sets with a power over 50 kW
  • explosion-proof electrical equipment
  • electric street lighting networks
  • electrolysis equipment
  • electrothermal devices
  • control and measurement apparatus as well as devices and installations for automatic regulation, control and protection of devices and installations mentioned above
At OSO, we have state-of-the-art facilities that allow us to conduct our classes in a comprehensive, professional and interesting manner for the trainees. With us, you can pass the exam or before committees (SEP, PSE, SIMP, SITPS) without any problems and obtain an electrical qualification - a certificate of qualification.

Admission Requirements:

  • 18 years of age or older
  • at least basic education

Where do we operate

We are available to our clients in the cities of Warsaw, Krakow, Katowice and Bielsko-Biała. We also hold classes for organised groups in pre-arranged locations throughout the country.We warmly invite you to take advantage of training at the OSO Operator Training Centre! [post_title] => G1 course - get certified with us! [post_excerpt] =>. [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => g1 [to_ping] => [pinged] => [post_modified] => 2022-06-10 12:47:41 [post_modified_gmt] => 2022-06-10 12:47:41 [post_content_filtered] =>. [post_parent] => 1550 [guid] => https://oso.edu.pl/?page_id=1552 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[4] => WP_Post Object ( [ID] => 1554 [post_author] => 3 [post_date] => 2017-12-06 16:17:32 [post_date_gmt] => 2017-12-06 16:17:32 [post_content] =>

G2 courses

You are invited to attend the G2 - thermal course aimed at those working with equipment, installations and networks that generate, process, transmit and consume heat as part of their operation, maintenance, repair, assembly and inspection and measurement work.At our Operator Training Centre, we offer customers a comprehensive and professional service - we have many years of training experience and hope that we can meet your requirements too.The G2 training course is designed to provide you with knowledge of the regulatory requirements for the operation and supervision of thermal plants, installations and networks. After the training and passing the examination, you can obtain the so-called licence, i.e. the certificate of qualification.

G2 permissions are needed for:

  • steam and water boilers for solid, liquid and gaseous fuels, with a power above 50 kW, with auxiliary equipment
  • industrial furnaces with a power above 50 kW
  • ventilation, air-conditioning and refrigeration equipment with a capacity of more than 50 kW
  • pumps, suction cups, fans and blowers with a power above 50 kW
  • devices for storing, storing and unloading fuels, with a storage capacity of over 100 Mg
  • steam and water turbines with a power over 50 kW with auxiliary devices
  • compressors with a power above 20 kW and compressed air and technical gas installations
  • heat networks and installations with auxiliary devices, with heat transfer above 50 kW
  • industrial steam and hot water receiving devices with a power greater than 50 kW
  • control and measurement apparatus as well as devices and installations for automatic regulation, control and protection of the devices and installations mentioned above
In our centre, we work in a modern way - we use proven teaching methods, teaching aids and rich, interesting programmes. With us, the examination or before the committees of the SEP, PSE, SIMP, SITPS is even easier, as confirmed by many of our customers.

Admission Requirements:

  • 18 years of age or older
  • at least basic education

Where do we operate

We conduct classes in the cities of Warsaw, Krakow, Katowice and Bielsko-Biala. We are also able to travel to our clients in other locations in Poland - please contact us for more information.We warmly invite you to choose training at the OSO Operator Training Centre! [post_title] => G2 course - enrol now! post_excerpt] => [post_excerpt [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => g2 [to_ping] => [pinged] => [post_modified] => 2022-06-10 12:45:02 [post_modified_gmt] => 2022-06-10 12:45:02 [post_content_filtered] =>. [post_parent] => 1550 [guid] => https://oso.edu.pl/?page_id=1554 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[5] => WP_Post Object ( [ID] => 1556 [post_author] => 3 [post_date] => 2017-12-06 16:19:19 [post_date_gmt] => 2017-12-06 16:19:19 [post_content] =>

G3 courses

You are invited to sign up for the G3 course at the CSO Operator Training Centre! This is a gas course aimed at those wishing to work with equipment, installations and networks that produce, process, transmit and consume gaseous fuels. The training relates to operation, repair, installation, maintenance and inspection and measurement work.The Operator Training Centre is a training company with many years of experience. We offer our customers professional and comprehensive services in a wide range and at affordable prices.Our G3 training course presents participants with knowledge of the operation and supervision of gas equipment, installations and networks. It prepares you for the exam before an examination committee of their choice e.g. (SEP, PSE, SIMP, SITPS) and, once passed, allows for the award of a qualification certificate.

G3 permissions are needed for:

  • gas equipment and installations with a pressure not higher than 5 kPa
  • gas equipment and installations with a pressure above 5kPa
  • industrial receivers of gaseous fuels with a power above 50 kW
  • gas distribution networks with a pressure not higher than 0.5 MPa (gas pipelines and reduction points, gas stations)
  • gas transmission networks with a pressure above 0.5 MPa (gas pipelines, gas stations, gas compressor stations)
  • gas turbines
  • equipment for the production of gaseous fuels, gas generators
  • gas fuel storage devices
  • equipment for processing and treatment of gaseous fuels, decomposition of gaseous fuels, natural gas processing equipment, gas treatment plants, expansion plants and bottling plants for liquefied gas, denitrification, mixing plants
  • control and measurement apparatus as well as devices and installations for automatic regulation, control and protection of the devices and installations mentioned above
The OSO centre stands for modern teaching methods, experienced and qualified instructors and professionally equipped training rooms. With us, you will be able to pass the SEP, PSE, SIMP and SITPS exams with ease!

Admission Requirements:

  • 18 years of age or older
  • at least basic education

Where do we operate

Warsaw, Krakow, Katowice, Bielsko-Biala are cities where we are available to our clients - this is where our training rooms are located. Current dates of conducted classes can be found on our website in the schedule. We are also ready to conduct closed trainings - for organised groups.Come and join us for courses at the OSO Operator Training Centre! [post_title] => G3 training - get certified with OSO! [post_excerpt] => [post_status] => [post_excerpt [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => g3 [to_ping] => [pinged] => [post_modified] => 2022-06-10 12:15:33 [post_modified_gmt] => 2022-06-10 12:15:33 [post_content_filtered] =>. [post_parent] => 1550 [guid] => https://oso.edu.pl/?page_id=1556 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[6] => WP_Post Object ( [ID] => 1559 [post_author] => 3 [post_date] => 2017-12-06 16:20:46 [post_date_gmt] => 2017-12-06 16:20:46 [post_content] =>

G1, G2, G3 powers - certification committees

In order to carry out work on electrical installations and networks in category G1, thermal installations in category G2 and gas installations in category G3, you need the relevant authorisations. These are referred to as 'SEP authorisations', but not only the SEP - the Association of Polish Electricians - can impose them.The certification boards that can grant G1 electrical authorisations and for G2 and G3 categories are appointed by the Energy Regulatory Office.

The main certification committees are:

  • SEP - Association of Polish Electrical Engineers
  • PSE - Polish Electrical Installation Association
  • SIMP - Association of Polish Mechanical Engineers
  • SITPS or SITSpoż - Association of Food Industry Engineers and Technicians
The ERO may also appoint other certification commissions. In view of this, there are several hundred different commissions in Poland before which participants in the so-called G1, G2, G3 training courses - can obtain certification.It is worth pointing out that authorisations issued by examination boards: SEP, PSE, SIMP, SITPS are granted for a specific period of 5 years. After this time it is necessary to renew them by taking the exam again. [post_title] => List of certification boards for G1, G2, G3 exams [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => list-of-commissions [to_ping] => [pinged] => [post_modified] => 2022-06-13 09:13:22 [post_modified_gmt] => 2022-06-13 09:13:22 [post_content_filtered] =>. [post_parent] => 1550 [guid] => https://oso.edu.pl/?page_id=1559 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[7] => WP_Post Object ( [ID] => 2327 [post_author] => 7 [post_date] => 2022-06-28 10:01:56 [post_date_gmt] => 2022-06-28 10:01:56 [post_content] =>
Shop floor worker

Become a certified aerial work platform operator and extend your professional qualifications. 

What will I learn during the course? 

  • What exactly are mobile platforms and where they can be used, 
  • Escalators and their types, 
  • News on the technical supervision of the device, 
  • Operator duties on the job - before, during and after work, 
  • Health and safety principles. 

Why is it worth choosing us? 

  • We enable you to acquire the necessary knowledge and qualifications, 
  • We teach the use of multiple devices, 
  • We combine theory and practice, 
  • We have only professionals on staff. 
https://youtu.be/MRm9OZ8kDhU

Where will the course for mobile platforms take place? 

As part of our course, we offer you to learn the theoretical part also in the mode REMOTE! Learn where and when you want! In addition, you will get access to live webinars on our e-learning platform with the possibility to play them over and over again. For the practical part, we invite you to the training hall of our company, which is located in Warsaw. We also offer travel to the client, so we train specialists all over Poland. 

UDT certificate

Types of mobile platforms 

Escalators are lifting devices used during construction and installation work at height. They are mainly used to lift people and materials to a specific workstation, both vertically and horizontally. The basic elements are the boom and the working platform. In terms of design features, these devices can be divided into three groups: 

  Mast climbing platforms Hanging mobile platforms Mobile mobile platforms 
Destiny moving people on a platform raised on a mast mounted on a chassis that allows the device to pass. moving people by means of work platforms (baskets) lowered on ropes and suspended from special girders placed on the roof of the building. the movement of persons performing work from the work platform, assuming that the persons enter and leave the platform at its one defined access position. 

[video class="" mp4="https://oso.edu.pl/wp-content/uploads/2023/03/podnosnik-OSO.EDU_.PL-OSO-1-1.mp4" poster="https://oso.edu.pl/wp-content/uploads/2023/03/okladka-podnosnik-OSO.jpg"][/video].

What is the cost of the course? 

To check the price of a course, please contact us, either by phone or via the enquiry form.  

inspections with various types of mobile platforms with a signature

About us 

For more than 15 years, we have been providing comprehensive training services for various professional groups. We use modern training techniques and refined curricula. Our offer includes training courses such as: UDT, energy - G1, thermal G2, gas G3, HDS, as well as training in occupational health and safety, fire safety and first aid, altitude, welding and many others.   

Do you have more questions? Feel free to call us!

Mobile platforms
[post_title] => Mobile platforms course - get your UDT licence! [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => permission-udt [to_ping] => [pinged] => [post_modified] => 2023-03-15 00:28:49 [post_modified_gmt] => 2023-03-14 23:28:49 [post_content_filtered] => [post_content_filtered] => [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2327 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[8] => WP_Post Object ( [ID] => 1561 [post_author] => 3 [post_date] => 2017-12-06 16:22:40 [post_date_gmt] => 2017-12-06 16:22:40 [post_content] =>

Operation and supervision in the operation of devices, installations and networks

The ordinance of the Minister of Economy, Labor and Social Policy of April 28, 2003 on the detailed rules for confirming qualifications by persons involved in the operation of devices, installations and networks, defines, inter alia, the types of works, positions and devices, installations and energy networks, the operation of which is appropriate qualifications required.Pursuant to the regulations, carrying out works on electrical, heating and gas equipment, installations and networks can be divided into two categories: operation and supervision:
  • operation stations - include operation, maintenance, repair, assembly, control and measurement works
  • supervision positions - refer to positions of employees managing the activities of persons conducting works in the field of operation and positions of technical employees supervising the operation of devices, installations and networks
Therefore, the G1-G2-G3 trainings also differ in terms of topics - you can choose a course for operation or supervision positions, or for both of them.

Persons in operating positions must have knowledge of:

  • construction, operation and technical conditions for the operation of devices, installations and networks
  • instructions and rules for the operation of devices, installations and networks
  • rules and conditions for carrying out control, measurement and assembly works
  • principles and requirements of occupational health and safety and fire protection and first aid skills
  • instructions on how to proceed in the event of a failure, fire or other safety hazard for the operation of devices or threats to life, health and the environment

Persons in operating positions must have knowledge of:

  • rules for the connection of equipment and installations to the grid, for the supply of fuel and energy and for the operation and maintenance of equipment, installations and networks
  • regulations and rules of conduct when programming the operation of devices, installations and networks, taking into account the principles of rational use of fuels and energy
  • regulations on operation, requirements for the maintenance of technical and operational documentation and the application of the operation manual
  • regulations applicable to the construction of devices, installations and networks as well as the standards and technical conditions which they should comply with
  • regulations relating to health and safety and fire protection, including first aid and environmental protection requirements
  • rules of conduct in the event of a failure, fire or other threat to the safety of the movement of devices connected to the network
  • principles of power management of devices connected to the network
  • rules and conditions for carrying out control, measurement and assembly works
If you are also interested in G1-G2-G3 licences, Warsaw, Krakow, Katowice, Bielsko-Biala are the cities where you can benefit from our training courses. We invite you to take advantage of our offer at OSO! [post_title] => G1-G2-G3 authorisations - supervision and operation post_excerpt] => [post_excerpt [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => entitlement-sep [to_ping] => [pinged] => [post_modified] => 2022-10-24 08:41:20 [post_modified_gmt] => 2022-10-24 08:41:20 [post_content_filtered] =>. [post_parent] => 1550 [guid] => https://oso.edu.pl/?page_id=1561 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[9] => WP_Post Object ( [ID] => 2842 [post_author] => 6 [post_date] => 2023-03-21 17:44:24 [post_date_gmt] => 2023-03-21 16:44:24 [post_content] =>

Service for handling equipment  

a mechanic changes a wheel on a telehandler

We are a company dedicated to, among other things, the repair and maintenance of UDT machines. We have many years of experience, which has made us the market leader. We work with experienced specialists who have the necessary qualifications and UDT authorisations to take care of your equipment. We are characterised by professionalism and reliability, which contributes to the satisfaction of our customers. 

UDT machines to be serviced - legal basis 

The handling equipment we service is subject to technical inspection. This means that the Technical Inspection Authority, should check the condition of the machine in question and ensure safety during use. Maintenance inspections are therefore mandatory. It is worth noting that these have nothing to do with warranty inspections, which are dictated by the individual equipment manufacturers. Therefore, in order to keep the equipment in good condition and thus not expose yourself to breaches of regulations, it is worth coming to us for a thorough inspection. 

The UDT equipment we service includes: 

  • forklifts, 
  • mobile platforms (basket and scissor lifts), 
  • telescopic loaders, 
  • gantries, 
  • HDS cranes. 
forklift trucks in the workshop

Our offer 

As part of our service, we offer fast and efficient assistance to repair your equipment. For ongoing repairs, we focus on servicing individual machine components. Amongst others, we offer: 

  • repairing the electronic system, 
  • repairing the hydraulic system, 
  • repair of the engine and its components, 
  • repair of components responsible for the control and safety of the machine, 
  • technical condition assessment. 

We also carry out maintenance on UDT machines. We try to take care of our customers' time so as not to delay the work for which the machines being serviced are required. Therefore, we remind you of the technical inspection and maintenance deadlines. In addition: 

  • we carry out all maintenance in accordance with current Technical Inspection Authority regulations, 
  • we carry out special tests to assess the safety of the device, 
  • we take care of the formalities. 

Assistance with the purchase of equipment 

telehandler in operation

We know how difficult the decision to buy a new machine can be. So we go out of our way to offer you professional help. Our experienced specialists will advise you on the best equipment to meet your expectations and needs. We will help you choose a particular machine and discuss its advantages and possible disadvantages. We will also tell you what to look for and what to consider when purchasing other UDT machines. 

Service of UDT machine elements 

Individual components of the machinery responsible for handling loads are particularly vulnerable to various damages. Our company therefore offers service and repair of such parts to prevent a dangerous situation or accident in the workplace. We are aware of the fact that even the smallest bend or scratch on such components can be hazardous to the health and lives of those in the vicinity. 

Our offer also includes: 

  • diagnostics, 
  • modernisation, 
  • audit, 
  • sale of new and used machinery, 
  • the possibility of hiring replacement machinery (forklift trucks and scissor lifts), 
  • possibility to check the machine before purchase, 
  • maintenance and operator courses for forklift trucks, scissor lifts, cranes, telescopic handlers, HDS cranes and tower cranes and cranes. 

QUESTIONS FROM STUDENTS

Yes. They must be carried out, first and foremost, for safety reasons, so that anomalies that could be a danger to workers and the people around them can be detected in time. This is also regulated by the Technical Inspection Authority.

During the inspection, the various systems responsible for the functioning of the machine are checked. Our company offers repairs to the hydraulic system and the electronic system, among others.

If necessary, our specialists will suggest what to look for when purchasing a UDT device and which model to choose to best suit your needs.

[post_title] => Repair and maintenance of UDT machines [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => repair-and-maintenance-machine-udt [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:28:42 [post_modified_gmt] => 2023-03-22 14:28:42 [post_content_filtered] =>. [post_parent] => 2995 [guid] => https://oso.edu.pl/?page_id=2842 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[10] => WP_Post Object ( [ID] => 2334 [post_author] => 3 [post_date] => 2022-06-28 10:34:06 [post_date_gmt] => 2022-06-28 10:34:06 [post_content] =>

Forklifts

Obtain a license to operate a forklift truckIn our center you will find courses enabling you to obtain a license for forklifts and telescopic loaders. Thanks to cooperation with us, you will be able to obtain permissions for each of the following devices without any problems:
  • forklifts,
  • telescopic loaders,
  • reach trucks,
  • forklifts,
  • trolleys for lifting the operator and load,
  • trolleys with variable reach,
  • industrial trucks.
read more

Platforms and lifts

Scissor lifts - devices covered by UDT technical supervision, requiring authorizationWe invite you to our center for training that allows you to obtain qualifications for lifts, basket and scissor lifts. Platforms and lifts are one of the most popular devices. With us you will get UDT qualifications that will allow you to work with devices such as:
  • aerial platforms (lifts),
  • scissor lifts,
  • mobile platforms,
  • stationary and slow-moving platforms,
  • hanging and mast platforms,
  • vehicle and rail platforms,
  • loading platforms.
read more

Altitude / mountaineering

Work at heightIf you are looking for mountaineering training needed to work at high altitude, in our center you will find what you need. Working at height is associated with a high risk, so it is worth knowing how to ensure safety. We offer courses such as:
  • climbing training in rope access techniques,
  • construction access,
  • construction access with elements of rope access techniques,
  • training in the evacuation of people at height,
  • creating temporary belay points,
  • training in the evacuation of people from confined spaces.
read more

Overhead cranes, hoists, winches, cranes, hook signaler

entitlement cranesWe invite you to attend a hook - signalman course at our centre, thanks to us you will learn how to work safely when transporting loads with cranes. In addition, you will find many other related courses in our offer:
  • signaller - hook,
  • hoists
  • winches,
  • gantries,
  • cranes.
read more

HDS cranes, tower

We organize trainings that allow you to acquire knowledge and skills for safe and effective work with cranes. We run a course on cranes:
  • Hydraulic car craneself-propelled,
  • portable HDS,
  • tower,
  • stationary,
  • on-board,
  • railway and on railway vehicles,
  • floating,
  • rail,
  • shipbuilding.
read more

Scaffolding fitter

The training in scaffolding assembly is intended for people working in the construction sector, who want to expand their competences. We prepare to work as a scaffolding fitter:
  • assembly of scaffolding made of steel and system pipes,
  • assembly of metal scaffolding,
  • dismantling of scaffolding.
read more

Training for UDT qualifications

We conduct comprehensive classes that will allow you to gain knowledge and skills on the use of UDT devices and safety while working with them .. With us you will learn everything that can be useful when working as an operator of devices such as:
  • UDT qualificationsstationary cranes,
  • mobile cranes,
  • tower and quick-erecting cranes,
  • mobile and portable cranes,
  • winches and hoists,
  • gantries,
  • stacker cranes,
  • hanging mobile platforms,
  • stationary mobile platforms,
  • mast climbing work platforms,
  • goods statements,
  • ship lifts,
  • forklift trucks,
  • construction cranes,
  • goods and passenger lifts.
read more

Welding

We invite you to our center, where you will learn how to properly weld, solder or weld. Our offer includes, among others, courses for:What is welding and what is welding?Welding:  
  • electrofusion
  • butt,
Soldering:  
  • soft,
  • hard
Welding:  
  • MIG / MAG,
  • TIG,
  • MMA,
  • SAW,
  • plasma arc welding.
read more

Flange connections

flange connectionsIn our center you will find a course that will prepare you to work on the installation of flanged connections in pressure systems in accordance with the PN EN 1591-4 standard. We have branches all over Poland available for organized groups and individual clients.read more

Health and safety courses

Occupational Health and SafetyIn our center, we conduct periodic health and safety training for employees. It is the responsibility of every employer to provide staff with regular courses for, among others:
  • blue-collar workers
  • engineering and technical workers
  • OHS employees
  • employers
read more

Cranes - UDT courses

Check out our crane training courses, also known as lifts or lifts. With us you will get UDT qualifications that will allow you to operate cranes:
  • shaft (elevators),
  • roundabouts,
  • port,
  • sloping,
  • vertical construction.
read more

G1, G2, G3 trainings

electric permissionsDo you want to obtain licenses for the operation and supervision of devices, installations and electricity networks that use heat or gas? We invite you to courses for G1, G2, G3 certificates for SPA! We conduct comprehensive and professional training in the above-mentioned categories, preparing for the exam before SEP, PSE, SIMP and SITPS committees. Many years of experience, modern training methods, affordable prices and high pass rate are the main advantages of our offer. Sign up for a course (SEP, PSE, SIMP, SITPS)!
G1:
  • control and measurement apparatus
  • electrolysis equipment
  • generating devices
  • electrothermal devices
G2:
  • thermal installations
  • steam and water boilers
  • compressors
  • pumps and fans
G3:
  • equipment for the production of gaseous fuels
  • gas turbines
  • storage devices

Sale of forklifts

In addition to training, we also offer sales
  • forklifts,
  • aerial platforms and scissors,
  • HDS cranes
  • telescopic loaders.
We are characterized by an attractive price and pleasant service. We deliver devices in the best possible condition, and among our offer you can find equipment from the following brand:
  • Still,
  • Haulotte,
  • Genie,
  • Manitou,
  • JLG,
  • Toyota,
  • Jungheinrich,
  • Linde.

Service / repair / maintenance

UDT devices often fail and failures caused by their intensive use. In this case, we invite you to use the website's services. We deal with repair and maintenance of forklifts and mobile platforms, lifts-cranes, HDS cranes, tele loadersscooters and overhead cranes such brands as:
  • Still,
  • Haulotte,
  • Genie,
  • Manitou,
  • JLG,
  • Toyota,
  • Jungheinrich,
  • Linde.

OSO Operators Training Center - UDT, OHS, fire protection training - Warsaw and the whole of Poland

The OSO Operators Training Centre invites you to make use of its services - together with us you can obtain your UDT licences, train your employees in occupational health and safety, as well as obtain other qualifications. We provide a professional and comprehensive service!We have many years of experience in training - we have been educating, auditing and advising companies for more than 15 years. We have the best specialists working for us, and we also cooperate with a number of authorisation bodies. We are committed to ensuring that each and every one of our customers is completely satisfied - we hope that we can meet your requirements too.Training and services at the highest level We meet the expectations of companies - our offer is comprehensive and tailor-made. We help both small and large companies in need of professional staff training and expert consultancy services.We invite you to participate in OHS training courses - initial and periodic. Our offer also includes occupational health and safety services, including occupational health and safety supervision, record keeping, occupational health and safety audits, preparation of environmental surveys, development of occupational risk assessments, preparation of buildings for acceptance by the National Fire Service, and others.Our offer also includes a first aid course, which allows you to gain comprehensive knowledge and skills in administering pre-medical first aid. We also provide courses in heights - mountaineering and UDT courses, including crane courses.Why is it worth choosing the OSO Operator Training Center?
  • we offer a wide range of training and services
  • We approach each customer individually
  • we provide affordable prices
  • qualified instructors and specialists work for us
  • we have modern facilities
Our headquarters are in Warsaw, but we also provide services in other locations throughout the country.If you have any questions about our services, please contact us - we will provide all the necessary information and prepare an individual offer. The OSO Operator Training Centre invites you to make use of its services!read more
[post_title] => Homepage [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => homepage [to_ping] => [pinged] => [post_modified] => 2022-06-30 21:16:39 [post_modified_gmt] => 2022-06-30 21:16:39 [post_content_filtered] =>. [post_parent] => 0 [guid] => https://oso.edu.pl/?page_id=2334 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[11] => WP_Post Object ( [ID] => 2590 [post_author] => 6 [post_date] => 2022-09-26 07:55:38 [post_date_gmt] => 2022-09-26 07:55:38 [post_content] =>

Professional construction access training

Construction access is referred to as all work carried out at height where classic technical means are used to access the work site. This includes, among others:  

  • scaffolding,  
  • lifts,  
  • landings,  
  • ladders.  

A type of construction access is also known as climbing on structural elements and structures, such as columns. Once at the work site, the equipment and skills are used for fall protection and positioning using supports or suspension.  

building access

What skills can be gained by taking the course? 

During the courses, its participants will gain knowledge on, among other things: 

  • knowledge of the law relating to working at heights, 
  • organising work at heights,  
  • appropriate selection of protective measures and safeguards,  
  • safe movement on flat and pitched roofs. 

Who should undertake building access training?  

The course is aimed at people who are at risk of falling from a height when carrying out work. It can be attended not only by those already working in industries where height qualifications are required, but also by those who want to change jobs and gain new qualifications.  

The Building Access course is dedicated to those who work in areas such as:  

building access training
  • telecommunications, 
  • construction, 
  •  Energy,  
  • wind farms, 
  • mining, 
  • roofing. 

Requirements 

In order to participate in the Building Access Training, you must meet the following requirements: 

  • be an adult,  
  • be in possession of a medical certificate stating that there are no health contraindications to working at heights,   
  • have at least a primary school education. 

Good physical fitness will also be an added advantage.  

Scope of training 

The training courses known as building access consist of both theoretical and practical classes. During the course, trainees learn, among other things, about the regulations on working at height, as well as the hazards that can occur during this type of occupation. They will also learn what factors can contribute to accidents and how to reduce their occurrence. In addition, the training course will systematise knowledge of the rights and obligations to be observed by employees. They will also learn about personal protective equipment, which includes work at heights equipment used to protect against risks to our health and life.

On the construction course, those attending will also learn about belay points and different types of posts, and how they should be built using site conditions. In addition, they will gain practical knowledge of how to tie knots, which are used when working at height. In addition, the training course will teach students the basic principles of autoranging. They will be introduced to belaying methods and systems, as well as the equipment used for this purpose.  

By taking courses with our company, each student will not only gain knowledge that they will use in their future work, but also ensure greater safety for themselves and their colleagues. 

The course concludes with both practical and theoretical examinations. 

Detailed training programme 

Theoretical topics such as: 

  • material transport,  
  • tool transport,  
  • methods of working at heights,  
  • current regulations and standards relating to working at heights,  
  • rigging construction,  
  • fall protection system,  
  • working on sloping roofs with different pitches,  
  • safety when working on a flat roof,  
  • moving up ladders,  
  • moving around the masts,  
  • moving around structures. 

In the practical classes, course participants will become familiar with: 

  • proper movement on stepladders and extension ladders, 
  • moving around structures using safety lines or hooks, 
  • basic information on rescue, including: pre-medical aid, how to behave during visual shock and the technique for performing CPR correctly, 
  • workplace rescue methodology using an evacuation kit. 

https://youtu.be/pssfnGNLKfI

Certificate  

After passing the exam, students receive a certificate confirming the skills they have acquired. In addition, each of them receives a certificate of passing the exam, which is issued in the form of a plastic card. Once the certificate has expired, you are invited to attend a refresher course. 

Refresher courses 

Refresher training keeps trainees up to date with the law and the techniques that are used in the various ways of working at heights, especially when returning to work after a long break or after their authorisation has expired.  

man climbs

Relevant! 

Building access training is not a substitute for health and safety training, the completion of which is compulsory. The basic course is designed to give its participants specialised knowledge of working at height using personal protective equipment.  

When a trainee starts in a position where he or she will be working at heights, our company offers the possibility to supplement building access training with initial health and safety training. This can be carried out together with basic height training. Each participant will receive a certificate confirming that they have completed it.  

When an employee is already employed and performing work at heights and when the deadline for periodic training is approaching, our company offers the possibility of taking such a course as well. It should take place at least once a year. 

We invite you to find out more about the courses our company offers. 

mountaineering training
[post_title] => Construction access course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => access-building [to_ping] => [pinged] => [post_modified] => 2023-05-16 16:22:02 [post_modified_gmt] => 2023-05-16 14:22:02 [post_content_filtered] =>. [post_parent] => 1508 [guid] => https://oso.edu.pl/?page_id=2590 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[12] => WP_Post Object ( [ID] => 2849 [post_author] => 6 [post_date] => 2023-03-21 17:45:26 [post_date_gmt] => 2023-03-21 16:45:26 [post_content] =>

We provide comprehensive sales of UDT equipment 

used mobile platforms

We are characterised by good prices and a customer focus. As a result, our customers know that they can count on our help in any situation. This is why they are happy to come back to us after many years and take advantage of additional services such as training or service. 

The UDT machines we offer 

We offer new and used sales: 

  • cranes, 
  • forklifts, 
  • aerial work platforms, 
  • telescopic loaders, 
  • scissor lifts, 
  • HDS cranes. 

Second-hand machines 

All the used equipment we sell is tested and inspected. Any repairs required are carried out before the machines are offered for sale. We make every effort to ensure that the parts we replace are original. Machines that have already been in use have a lower price than brand-new models. This makes them more attainable also for companies with limited budgets. 

Top manufacturers 

  • for HDS cranes: Palfinger, Atlas, Hiab, HMF, Fassi, Befard, HYVA, PM, 
  • for forklift trucks: Linde, Still, Hyster, Nissan, Manitou, Jungheinrich, Bulgar, Toyota, 
  • for telehandlers: Bobacat, Kramer, Clas, Massey ferguson, New Holland, Faresin, JCB, Manitou, Merlo, Caterpilla, 
  • for cranesZbud, Rialex Crane Systems, DHC Systems, ZAK, ABUS, Schimalz, Konecranes, 
  • for mobile platforms: Tecchio, Haulotte, GSR, Multitel Pagliero, France Elevateur, Ruthmann, Wumag, Bocker, Bronto, BST, Cella, Oil & Steel, Colombo, RAM, Skyjack, Omme, Bizzocchi. 
telescopic loader during loading

Supply of UDT equipment 

We can deliver the machine of your choice to any address throughout the country. We have specialised transport equipment at our disposal. This makes it possible to transport your handling equipment in a safe and efficient manner.  

About us  

We provide a comprehensive service for the purchase of equipment under technical supervision. We take care of our customers at every stage of the purchase. Our team of experienced specialists is sure to find you the right device to meet your criteria. 

We have been on the market for more than 15 years and have thousands of satisfied customers throughout Poland.   

Other services we offer 

We also offer stationary and mobile service, of machines under technical supervision. We provide training for operators and maintainers of material handling equipment as well as further training. 

Our training centre offers. 

Our extensive training offer includes courses for operators and maintenance workers:  

  • deck cranes,  
  • scissor lifts,  
  • mobile and portable cranes,  
  • telescopic loaders,  
  • stationary cranes,  
  • cranes,  
  • tower and quick-mounting cranes,  
  • rail-mounted cranes,  
  • aerial work platforms and on railway vehicles.  
forklift trucks in front of the warehouse

We also offer training: 

  • welding,  
  • welding,  
  • heights,  
  • for electrical, energy and gas qualifications, 
  • as a flange fitter. 

For us, good customer contact, professional service and advice are the foundations for building good relationships. As a result, customers know that they can count on us to help them purchase and repair UDT machines, which is why they are happy to return to us years later and take advantage of additional services such as service and training for operators or maintenance staff. 

If you are interested in our offer or have any questions, please contact us. 

QUESTIONS FROM STUDENTS

We offer the possibility of delivering equipment nationwide. 

We sell new and used: forklifts, cranes, telehandlers, scissor lifts, basket lifts and HDS cranes.  

Yes, our specialists will help you with the selection of your appliance and even carry out a full diagnostic or service.

[post_title] => Sale of UDT machines [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => sell-machine-udt [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:24:28 [post_modified_gmt] => 2023-03-22 14:24:28 [post_content_filtered] =>. [post_parent] => 2995 [guid] => https://oso.edu.pl/?page_id=2849 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[13] => WP_Post Object ( [ID] => 2347 [post_author] => 3 [post_date] => 2022-06-28 19:57:32 [post_date_gmt] => 2022-06-28 19:57:32 [post_content] => [post_title] => Publications [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => publish [to_ping] => [pinged] => [post_modified] => 2022-06-28 19:57:32 [post_modified_gmt] => 2022-06-28 19:57:32 [post_content_filtered] =>. [post_parent] => 0 [guid] => https://oso.edu.pl/?page_id=2347 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[14] => WP_Post Object ( [ID] => 2611 [post_author] => 7 [post_date] => 2022-09-29 11:19:37 [post_date_gmt] => 2022-09-29 11:19:37 [post_content] =>
acetylene-oxygen torch

One of the most common methods used to separate metals with low-alloy and low-carbon properties is the gas cutting method using acetylene-oxygen torches. The cutting cycle of the metal material is based on bringing it to a suitable temperature, whereby, in combination with close contact with the torch, the material burns and escapes, taking the form of metal oxide. Such an effect is only possible if properly designed burners are used, allowing oxygen to be mixed with the correct proportions of the flammable gas. The most commonly used materials for flammable gases are primarily acetylene and propane-butane.  

Training program 

With our course you will gain new qualifications and in the future a well-paid job. The course also provides many benefits for companies in terms of improving the qualifications of welders and operators in gas cutting. Our course ends with a practical and theoretical exam. 

Topics discussed on the course:

  • gas burner construction, 
  • correct positioning of the acetylene-oxygen torch, 
  • use of cutting gas, 
  • sequence and correctness of burner firing, 
  • correctness of burner extinguishing, 
  • appropriate setting of oxygen and acetylene pressure for cutting, 
  • how to cut the material evenly and how to cut holes, 
  • Health and safety regulations when working with technical gases such as oxygen, acetylene, propane. 

Certificate 

Upon successful completion of the course, a course completion certificate for manual thermal cutters - oxy-acetylene cutting - is issued by the accredited TUV certification body, which is valid for 3 years. The certificate is issued in both Polish and English. The certificate entitles the holder to work with manual cutting devices using acetylene-oxygen and propane-oxygen torches. It is recognised in Poland and other EU countries. 

How does an oxy-acetylene torch work? 

image with course inscription

The purpose of gas welding is to heat the workpiece material to a sufficiently high temperature so that, with the help of an oxy-acetylene flame, the degradation process then takes place and the metal changes its state of aggregation. Using this method, it is possible not only to separate thick steel components, but also to join them permanently. The results obtained and the quality of the cut are strongly influenced by the choice of torch type. A small torch with a smaller stream should be used in order to obtain an adequate and high-precision cut. There are universal torches, which are suitable for both cutting and welding materials. It should be remembered that not all metals are suitable for machining with gas cutting. Metals suitable for processing with an oxy-acetylene torch are: 

  • cast iron, 
  • brass, 
  • titanium, 
  • tungsten, 
  • iron, 
  • bronze. 

Oxy-acetylene burners also perform well when machining structural, low-carbon, rust-covered and low-alloy steels. 

Where is the acetylene-oxygen torch used? 

It is the basis for all welding, machining and cutting work on all types of metal alloys. Thanks to its versatile use and the function of adjusting components such as the size of the torch, oxy-acetylene cutting is very popular with large companies and small businesses and workshops. The demand for this type of service is everywhere where precise, high-quality customisation of even thicker metal components for a specific industry or service is required. 

Advantages and disadvantages of using an oxy-acetylene torch 

The main advantages of using an oxy-acetylene torch include: a very large cutting thickness range, good cutting quality on thicker materials, perpendicular cutting edges, the possibility of automation and cutting at various angles. On the other hand, the disadvantages include a large heat affected zone, inability to cut high-alloy and high-carbon steels, increased penetration time and low cutting speed. 

Oxygen cutting with acetylene is one of the most efficient methods, This is mainly due to the faster and longer reaching of high temperatures. The main advantages of oxy-acetylene burners are their mobility, which allows them to cut at different angles. Another advantage is their impeccable cutting quality especially for thick metal sheets, as well as the feature that allows mechanised cutting processes. The method of metalworking using oxy-acetylene torches is very popular in many industries ranging from small workshops to large production halls. Thanks to its versatility, gas cutting is used to process cast iron, brass, bronze and steel, as well as other metal alloys. It is also used in the heating, tanning and brazing processes. 

Who is the course aimed at? 

The course is mainly intended for people who wish to broaden their theoretical as well as practical knowledge, but is primarily aimed at welders and gas cutters or workers in related professions such as locksmiths, mechanics and maintenance workers.  

torch cutting process

Conditions for participation in training 

All applicants should be at least 18 years old and have a minimum of primary education. You should also provide a medical certificate that there are no health contraindications to working with burners.... 

The price list and enrolment are available on our website, if you have any questions, please feel free to call us. 

The course will take place in both classroom and online formats depending on the preference of the students. 

[post_title] => Oxy-acetylene torch cutting course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => use-burner [to_ping] => [pinged] => [post_modified] => 2023-03-14 13:48:30 [post_modified_gmt] => 2023-03-14 12:48:30 [post_content_filtered] =>. [post_parent] => 2104 [guid] => https://oso.edu.pl/?page_id=2611 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[15] => WP_Post Object ( [ID] => 2104 [post_author] => 3 [post_date] => 2022-03-31 19:55:46 [post_date_gmt] => 2022-03-31 19:55:46 [post_content] => [video class="" mp4="https://oso.edu.pl/wp-content/uploads/2023/03/spawacz-OSO.EDU_.PL-OSO-1.mp4" poster="https://oso.edu.pl/wp-content/uploads/2023/03/okladka-spawacz-OSO.jpg"][/video][post_title] => Welding [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => welding [to_ping] => [pinged] => [post_modified] => 2023-03-15 00:24:39 [post_modified_gmt] => 2023-03-14 23:24:39 [post_content_filtered] =>. [post_parent] => 22 [guid] => https://oso.edu.pl/?page_id=2104 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[16] => WP_Post Object ( [ID] => 3148 [post_author] => 3 [post_date] => 2023-08-31 11:39:45 [post_date_gmt] => 2023-08-31 09:39:45 [post_content] =>

Get GWO certificates to work on wind turbines

Global Wind Organization is a global wind organisation founded by leading companies in the wind energy industry. General health and safety requirements and training standards for the wind industry have been developed to unify the knowledge, skills and potential health and safety risks of personnel.

Certification in CSOs

CSO centre offers GWO training essential for working on wind turbines. Training according to the GWO protocol can only be delivered by certified training centres. To ensure access to up-to-date information on training content for individual technicians and training providers, there is an international GWO WINDA platform, available online at: https://winda.globalwindsafety.org/register/. Each GWO trainee, after creating a personal profile in the WINDA system, submits his/her WINDA ID to the training provider to complete the training data in the system. Certificates obtained in GWO training courses are valid for a period of 24 months. In order to maintain their validity, the trainee is required to undertake periodic training in the module in question within two months before the expiry of the applicable entitlement. If the training is not renewed in time, it becomes invalid and the trainee must start the training procedure anew.

GWO certificates are recognised by employers all over the world as a guarantee of protection in the workplace.

Training standards

The GWO (Global Wind Organisation) training standards are courses that enable participants to understand and minimise the risks associated with safety hazards in the area of the wind turbine industry. The latest versions of all training standards are available on the official GWO website. The content is regularly reviewed and updated by committees such as the Training Committee, Audit & Compliance Committee,

History of the establishment of the organisation 

In 2009, the world's largest wind turbine manufacturers and operators announced the creation of the only structure that should regulate and standardise work on wind turbines - the Global Wind Organisation (GWO). Since then, the green energy concept has seen the emergence of a standard to ensure the safety of those involved in the wind industry, with the main aim of minimising accidents and injuries at work to zero. 

Three years later, in 2012, the GWO issued the first training standard for working in the wind energy industry - BST (Basic Safety Training). The certification of employees according to this standard provides assurance to companies working in the wind energy industry that the employee has the necessary and sufficient knowledge to work safely around turbines, as well as adequate skills in handling, evacuation, victim rescue or first aid. The GWO BST standard consists of four to five modules.

Training GWO Basic Safety Training Onshore consisting of 4 modules, is a mandatory training course for onshore wind turbine operators. 

  • GWO (WAH) Working at Heights; 
  • GWO (FAW) Fire awareness - fire protection; 
  • GWO (FA) First Aid; 
  • GWO (MH) Manual Handling; 

Training GWO Basic Safety Training Offshore consisting of The 5 modules are mandatory training for offshore wind turbine operators. :  

  • GWO (WAH) Working at Heights; 
  • GWO (FAW) Fire awareness - fire protection; 
  • GWO (FA) First Aid; 
  • GWO (MH) Manual Handling; 
  • GWO Sea Survival; 

Participation in these training courses ensures that you are fully prepared to carry out your professional duties. During the course, the participant acquires the skills to respond to emergency and unpredictable situations, including taking part in training in first aid, handling manual handling, dealing with possible fires in the turbine, maintaining safety rules when working at great heights and maritime survival skills. 

In 2017, another important standard emerged - GWO BTT (Basic Technical Training), which is a continuation of the training and the next step in the qualification of workers related to technical knowledge, construction and operation of wind turbines. The GWO BTT standard includes three modules and an installation package, which includes two modules: mechanical and installation. Completion of this BTT training paves the way for job opportunities in the wind energy industry both onshore and offshore. 

  • Mechanical; 
  • Electric; 
  • Hydraulic; 

The GWO structure now includes up to 11 training standards in different modular variations, which cover all stages of wind turbine construction and subsequent maintenance, from the use of jacks and blade repair to simple wind turbine operation. Each module of any of the 11 standards is a self-contained unit, allowing the trainee to change modules according to operational needs.  

GWO WINDA - International Registration System  

 Software WINDOW constitutes Global Training Records Database in the wind energy industry. The main purpose of this tool is to verify the certification of GWO Training Organisers and the training status of participants who have undergone certified training according to GWO standards. In order to participate in training courses, interested persons must register in the WINDA GWO system to receive an individual WINDA ID number. This number will be used to record all training provided and to establish the expiry dates of the certificates, which will be written down by the training provider. 

Important! Some companies may require additional certifications or internal competence standards. GWO BST certificates are valid for 2 years, after which it is recommended to complete the knowledge through the GWO BST Ref course. 

Teaching venue  

We provide training at various locations, including Warsaw and our regional branches throughout the country. We also offer training at the client's premises, including travel to the client.  

All information regarding open courses is available on our website. If you are interested in closed training, please contact us - our centre will prepare a personalised offer for you. 

If you need more information, we are ready to answer all your questions about our courses. Feel free to contact us by phone or email, or visit our Centre, where we will be happy to present our offer, help you clear up any doubts and prepare a training quote. 

[post_title] => Global Wind Organization [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => gwo [to_ping] => [pinged] => [post_modified] => 2023-10-11 14:05:31 [post_modified_gmt] => 2023-10-11 12:05:31 [post_content_filtered] =>. [post_parent] => 22 [guid] => https://oso.edu.pl/?page_id=3148 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[17] => WP_Post Object ( [ID] => 2126 [post_author] => 7 [post_date] => 2022-04-09 20:29:14 [post_date_gmt] => 2022-04-09 20:29:14 [post_content] =>
welder at work

Fiber optic welding course

The fibre optics welder is currently one of the most sought-after and valued professions, both in Poland and worldwide. The demand for welders can be seen in almost every field of the economy. Acquire a welding licence for the profession. No previous knowledge of fibre optics is required. We give you the opportunity to learn about the application of new technologies, but also to improve existing ones. Our course will provide you with a comprehensive knowledge of measuring fibre optics, operating welding machines and making welds. 

What will you learn? 

  • health and safety rules,  
  • control measurements, 
  • fibre optic welding, 
  • types of optical fibre, 
  • operation of a fibre optic welding machine, 
  • the main components of a fibre optic cable, 
  • preparation of cables and welding equipment. 
https://youtu.be/fbhrpIbdT0k

Upon completion of the training, you will receive a certificate. 

If you are curious whether the position will meet your expectations and whether you can find a job without problems, we have some valuable information for you.  

We offer a fibre optic welder course taught by instructors with many years of experience in the industry. Fibre optics is becoming more widely used, fibre optic communications technology shows no signs of slowing down anytime soon, and with continued development it has become a standard way of connecting end users and networks, as well as delivering broadband internet and related services to homes and businesses.  

FTTH technology 

What topics will be covered and what can be learned?

Thanks to extremely efficient FTTH (Fiber To The Home) technology, the rise in popularity of FTTH networks has led to a further increase in demand for fibre welding specialists. On our course, you will learn everything you need to know to start a career in an industry that has shown steady and exponential growth in recent years. We will help you succeed in this hugely popular field.   

Who is this course for? 

This course has been designed with a wide audience in mind. From the technician starting out in the industry, to well versed and experienced network administrators. The training is aimed at those looking to expand their skills and those seeking a better understanding of the technology behind fibre optics. 

Practical topics
Explore the growing market for fiber optic infrastructure and its applications. 
Experience
No initial experience is required. This course is designed for anyone interested in working with fibre optics. 
Many years of experience
We work with the best experts in the industry. 
Science
Time devoted to theory, hands-on instructions, and support. 
Better prospects
Training to prepare you for a further career in the public and private sectors. 
Certificate
Welding qualifications confirmed by an appropriate certificate. 

[video class="" mp4="https://oso.edu.pl/wp-content/uploads/2023/03/spawacz-swiatlowodow-OSO.EDU_.PL-OSO-1.mp4" poster="https://oso.edu.pl/wp-content/uploads/2023/03/okladka-spawacz-swiatlowodow-OSO.jpg"][/video].

What is the price of the training? 

Prices are set individually, depending on the number of participants and the date of the training. We offer very attractive prices and discounts for groups. To find out the cost of a training course, please call us. 

course description

Earnings 

Those with this profession do not have to worry about jobs or wages. The salary depends on experience, skills and certificates held, so the course is a good investment in the future. 

Where is the course taking place? 

Our centres are located throughout the country. For closed training sessions, we can also travel to you. If you have any additional questions, our experts are here to help. Employers are looking for qualified professionals, so don't wait and get certified to find your place on the job market.  

welding of optical fibers
[post_title] => Gain qualification for fibre optic welding [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => welding-swiatlowow [to_ping] => [pinged] => [post_modified] => 2023-03-15 00:23:40 [post_modified_gmt] => 2023-03-14 23:23:40 [post_content_filtered] =>. [post_parent] => 2104 [guid] => https://oso.edu.pl/?page_id=2126 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[18] => WP_Post Object ( [ID] => 2643 [post_author] => 3 [post_date] => 2023-01-12 10:42:07 [post_date_gmt] => 2023-01-12 10:42:07 [post_content] => [sc_fs_multi_faq headline-0="h2" question-0="sadfsadf" answer-0="sadfsadfsadf" image-0="" count="1" html="true" css_class=""] [post_title] => sdafsadfsadfsad [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => sdafsadfsad [to_ping] => [pinged] => [post_modified] => 2023-01-12 10:42:07 [post_modified_gmt] => 2023-01-12 10:42:07 [post_content_filtered] =>. [post_parent] => 0 [guid] => https://oso.edu.pl/?page_id=2643 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[19] => WP_Post Object ( [ID] => 3155 [post_author] => 9 [post_date] => 2023-08-31 15:08:26 [post_date_gmt] => 2023-08-31 13:08:26 [post_content] =>

The OSO Operator Training Centre invites you to the course Working at Heights (WAH).  

Thanks to the Working at Heights training course organised by OSO, you will acquire the skills necessary to work as a wind turbine technician. The knowledge you gain at our centre will enable you to safely perform tasks at considerable heights.  

The priority training objective is to raise safety standards in the wind turbine sector by providing participants with professional evacuation and rescue techniques and minimising the risks associated with working at considerable heights. 

Wind turbines

At our centre, we offer the opportunity to gain competence and knowledge under the guidance of experts in the field. Our courses WAH cover the entire country - both at our headquarters in Warsaw and in our field branches, as well as in the form of open and closed training courses. Choosing to take part in a course WAHyou can count on attractive financial terms

Purpose of the training

(WAH) Working at Heights 

Training participants

The aim of the training is to acquire theoretical knowledge and practical skills on the safe use of basic personal protective equipment (PPE) when working at height. The trainees are trained in the principles of belaying and evacuation in wind turbines, according to GWO standards. The training is designed to prepare the trainees for working at height in the wind industry, as well as teaching them how to deal with emergency situations related to the industry.  

After the training  (WAH) Working at Heights - Working at heights coursework: 

  • demonstrates knowledge of the hazards and risks associated with working at height specific to wind turbines; 
  • Is familiar with the current legislation relating to work at height. Has knowledge of current national legislation relating to work at height; 
  • is able to identify PPE (personal protective equipment), including knowledge of European and international standards for the marking of equipment such as: safety rope, helmet, harness, etc; 
  • uses work-at-height equipment correctly. Has the knowledge and skills to properly inspect before use, store and fit personal protective equipment; 
  • can demonstrate the use of appropriate personal protective equipment; 
  • has knowledge of evacuation and the use of evacuation equipment and can demonstrate the correct use of evacuation equipment; 
  • can effectively use rescue equipment and provide assistance in emergency situations around wind turbines; 

Programme

Training (WAH) Working At Hights - Work at height has been constructed on the basis of the requirements of the Office of Technical Inspection and current legislation. Our aim is to present you with the most important issues related to the safety of working at height in the environment of wind turbines. During the theoretical and practical training, participants will be familiarised with the law on working at height, basic personal protective equipment, taught how to deal with emergency situations, trained in rescue at height in a wind turbine environment and how to perform safe work at height.  

Training (WAH) Working At Hights forms part of the Basic Safety Training package. Among other things, the course includes: 

Work at height
  • Legal issues relating to safety at work; 
  • Safety systems including vertical belay systems; 
  • Systems and regulations for working at heights; 
  • Exercises in the use of safety and belay systems; 
  • Exercises to train in the correct working position; 
  • Simulation of emergency scenarios to prepare to act in life and health emergencies; 
  • Hanging shock; 
  • Emergency procedures; 
  • Principles of correct use of personal protective equipment and operation of rescue equipment; 
  • Life and health emergency training exercise

Entitlements

We are accredited by DNV and GWO 

Training Working at Heights takes place in accordance with the current GWO Basic Safety Training standard. WAH is one of the key BST training modules that, according to the GWO standard, must be completed by anyone working at height on wind turbines.  

Upon completion of the course, participants will receive a certificate confirming their qualifications and skills in working safely at heights. The Certificate received is an official certification of the participant's completed training and confirms that they are prepared to perform their professional duties safely in environments where there is a risk of hazards associated with working at heights. 

The certificate is valid - 24 months. We recommend refresher training before completing this period. 

Requirements

The following requirements must be met in order to work at heights: 

  • at least 18 years of age  
  • at least a secondary education 
  • valid certificate from an occupational physician that there are no health conditions for working at a height of more than three metres 
  • social security or accident insurance paid 
  • having a WINDA ID number 
  • completed medical questionnaire 
  • work clothes, work footwear and gloves 
  • paid training fee
  • identity document. 

The upper weight limit for a person taking part in training at height is 135 kg 

Price

Price of training Working at Heights is determined on an individual basis. The fee depends on the number of participants attending. We offer attractive discounts for larger groups. 

Duration of training: 2 days 

Teaching venue 

We provide training at various locations, including Warsaw and our regional branches throughout the country. We also offer training at the client's premises, including travel to the client.  

All information regarding open courses is available on our website. If you are interested in closed training, please contact us - our centre will prepare a personalised offer for you. 

If you need more information, we are ready to answer all your questions about our courses. Feel free to contact us by phone or email, or visit our Centre, where we will be happy to present our offer, help you clear up any doubts and prepare a training quote. 

Welcome to the CSO Operator Training Centre for training courses Working at Heights - Warsaw and all over Poland! 

[post_title] => (WAH) Working at Heights - Warsaw and entire Poland [post_excerpt] => [post_state] => [post_excerpt [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => working-at-heights-warszawa-i-cala-poland [to_ping] => [pinged] => [post_modified] => 2023-09-04 22:42:56 [post_modified_gmt] => 2023-09-04 20:42:56 [post_content_filtered] =>. [post_parent] => 3148 [guid] => https://oso.edu.pl/?page_id=3155 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[20] => WP_Post Object ( [ID] => 2389 [post_author] => 7 [post_date] => 2022-07-08 23:56:04 [post_date_gmt] => 2022-07-08 23:56:04 [post_content] =>
manual soldering

With us, you will learn about the soldering process and how to use specific tools and materials. We will teach you the skills you need to use during the related tasks. In addition, we offer an individual approach to each student and provide all useful tools and accessories. We will also provide you with teaching materials, containing a collection of important information that can be particularly helpful for your first independent attempts at soldering. 

The form of the course 

The training is based on an electronic platform (theoretical classes) and on-site workshops. On request, by prior arrangement, a weekend course is available to enable training to be combined with work and study. It is worth mentioning that we are keen to ensure that the students of our course for beginner soldering iron operators get the most out of the training. That is why the activity of the participants is welcome. We particularly invite you to: 

  • Active participation in class (asking questions, sharing own insights and experiences), 
  • Familiarise yourself with the teaching materials provided on the course, 
  • Self-study (additional publications recommended during the course), 
  • Carry out prescribed tasks. 

Syllabus 

In a programme of both theoretical and practical-technical activities, you will find topics such as: 

  • Theory of soldering basics, 
  • Repair in the area of electronics, 
  • Types of soldering irons and rules for their use, 
  • Basic soldering errors (case studies), 
  • Soldering - practice, 
  • Repair of wires (making soldered connections and desoldering), 
  • Health, safety and fire safety rules. 

Why take part in the training? 

soldering iron

For soldering work, the course offers many tangible benefits and opportunities: 

  • Acquisition of theoretical knowledge of the basics of soldering, 
  • Mastering soldering operations in practice, 
  • Exchange experiences with others with similar motivations and interests, 
  • Improving your skills, 
  • Gain greater confidence in carrying out effective soldering work at home and in the workshop. 

A few words about soldering 

Soldering is a type of technology used to join metal components using what is known as solder. Solder is the metallic substance and the binder in the soldering process. The melting point of the solder should be significantly lower than the melting point of the materials to be joined. It is believed that the first soldering techniques existed as far back as ancient Egypt. As civilisation progressed, these techniques were not only perfected, but also new methods of soldering were developed. Today, soldering is used in many industries and in the home. Workers like to use this activity when joining wires or repairing various electronic devices, such as computer components. Of course, soldering requires skills to avoid mistakes, such as: 

  • The formation of air bubbles in the soldered joint, 
  • Misplacement of soldered components due to uncontrolled movement, 
  • Inappropriate amount of binder, 
  • Cracking of the soldered connection, 
  • Unsuitable connector shape, 
  • The phenomenon of so-called cold soldering, 
  • The ingress of unauthorised substances from outside into the joint construction, 
  • Use of the wrong binder, 
  • Inappropriate temperature of soldering carried out, 
  • Selection of the wrong soldering method. 

You should avoid rush and remember about accuracy and precision, because the purpose of soldering is to obtain a good quality joint. 

https://youtu.be/fbhrpIbdT0k

A quick guide to the soldering process 

Action Course Additional materials needed 
cleaning removing dirt, grease, coatings and oxides from elements file (mechanical cleaning), appropriate type of cleaning agent, cloth, brush 
heating of components remember to properly prepare the flux and solder, then we operate with the soldering iron flux, feb 
waiting time for the joint to form basic soldering follows, we wait; in the meantime, diffusion and adhesion phenomena take place -
cooling of the joint and cleaning of its surface we remove excess auxiliary substances after soldering cleaning agent for surfaces after soldering, cloth, brush 

What about the beginner's course? 

students in the training room

You may also be interested to know that we offer an advanced course. It is intended for people who have already completed a beginners' course and want to deepen their knowledge and acquire new skills in the operation of a soldering iron. If you would like to extend your professional qualifications even further, we encourage you to take a look at the details of our advanced soldering course. 

We invite you to participate in our courses 

We are a company that has been active in the training sector for 15 years. Our asset is our extensive experience in the organisation of training courses, dedicated to both individuals and institutional entities. In order to provide our students with the best possible conditions for acquiring and improving their competencies, we cooperate with lecturers and instructors who are distinguished by their expert knowledge, professionalism and extensive didactic experience in the field of soldering methods.  

Join us for a solid and concrete training course at a reasonable price. If you are interested in our soldering basics training offer, please contact our consultant and sign up for training. 

soldering course
[post_title] => Hand soldering course for beginners [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-soldering-for-beginners [to_ping] => [pinged] => [post_modified] => 2023-03-14 13:16:17 [post_modified_gmt] => 2023-03-14 12:16:17 [post_content_filtered] =>. [post_parent] => 2104 [guid] => https://oso.edu.pl/?page_id=2389 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[21] => WP_Post Object ( [ID] => 2648 [post_author] => 5 [post_date] => 2023-01-12 11:05:12 [post_date_gmt] => 2023-01-12 11:05:12 [post_content] =>

milk tanker.We specialise in providing vocational training and train professionals throughout Poland. We invite you to attend a training course on equipment for filling and emptying transport tanks for non-hazardous materials that are filled, emptied or transported under pressure. We have been providing training nationwide for more than a dozen years. We provide a guarantee for gaining new skills and qualifications for the profession. We have thousands of satisfied customers.

Training programme

Classes at our centre are divided into three stages, with the trainee starting with theoretical classes. During the lectures, the participant will learn about the most important issues, after which he or she will undertake practical tasks under the guidance of our specialists. The final stage is an examination at our training centre. Once the participant is thus prepared, he or she will take the state examination before a commission appointed by the Transport Technical Supervision

Key issues pursued during the course include:

  • operation of equipment
  • filling a food tanker.principles of operation and handling of transport tanks
  • technical conditions for technical inspection
  • construction of equipment and its application
  • safety rules and first aid
  • equipment for filling and emptying transport tanks
  • applicable legislation
  • maintenance and repair work
  • technical documentation
  • principles and requirements of occupational safety
  • preparation of contingency plans
  • rules to be followed in the event of an accident, fire or other emergency.

Exam and qualifications

After completing the training at our centre, the participant can take a state examination before a commission appointed by the TDT. A positive result of the examination confers the entitlement to practice the profession in the form of a qualification certificate. The period of validity of the qualification is 10 years.

Where do we train?

Our training headquarters are in Warsaw, but we train specialists all over Poland. We are in possession of special vehicles which enable us to drive to the address indicated by our client.

Conditions of participation

qualification certificate.To take part in the vocational course, you must be at least 18 years of age and, have at least an elementary school education and provide a medical certificate stating that there are no contraindications to the occupation.

Other professional courses held at our centre:

  • course on working at heights
  • UDT operator course
  • courses G1, G2, G3
  • forklift operator course
  • scaffolding maintenance course.

Q&A:

 

The examination body for the training is the Transport Technical Supervision.

Entitlements are issued for 10 years, after which they can be renewed.

We train specialists in our centre, which is located in Warsaw, but we also have a mobile offer with travel to the client. 

[post_title] => Operation of transport tank filling and emptying equipment [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => handle-uno [to_ping] => [pinged] => [post_modified] => 2023-01-13 10:39:06 [post_modified_gmt] => 2023-01-13 10:39:06 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2648 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[22] => WP_Post Object ( [ID] => 2402 [post_author] => 6 [post_date] => 2022-08-02 09:50:25 [post_date_gmt] => 2022-08-02 09:50:25 [post_content] =>

Become a scaffolder

Working on a construction site is undoubtedly not the easiest of jobs. It requires employees to be not only fit, but also competent in the use of specialised equipment. Investing in a scaffolding qualification course is therefore a very good decision if you are considering broadening your skills in the construction sector. 

the fitter performs his/her duties

During the scaffolding assembly course at OSO, you will gain the necessary theoretical knowledge and practical skills to safely and efficiently perform scaffolding assembly work. During our training, you will not only have the opportunity to confirm your newly acquired skills, but also gain valuable experience needed in your future work. Under the watchful eye of our experienced trainers, anyone can acquire a license to install scaffolding.  

Who can take part in the training? 

Our trainers are experienced staff at a high level, ready to train anyone, regardless of the level of previous experience in the work of a scaffolding fitter.  

In order to participate in the installation course conducted at OSO, you must meet the following requirements: 

  • 18 years or older, 
  • Education at least elementary, 
  • No medical contraindications to practise as a scaffolder. 

Anyone who meets all of the above conditions can take advantage of the OSO company's offer to expand their competences with qualifications for the assembly of scaffolding. 

What is the scaffold assembler's course? 

Like most other courses offered at OSO, the scaffolding installer course consists of three parts: theoretical, practical and a final exam. The qualifications gained on the course are unlimited, anyone who completes the training course with a pass in the examination will be awarded a scaffolding licence. What do the different parts of the training look like? 

The first part of the scaffold assembler's course is the theoretical part. At this stage, students will learn a number of basic issues needed to work as a scaffolding fitter. The scope of information provided in the theoretical part includes: 

  • Health and safety rules applicable to the erection and dismantling of scaffolding, 
  • Ways of keeping adequate technical records, 
  • Rules for the use of scaffolding, 
  • Types of pipes used in scaffolding assembly, 
  • Ways to fold the scaffolding correctly, 
  • Activities before and after scaffolding work. 
workers on the scaffolding

In the theoretical part, our training staff provides the trainees with all the information they need to work safely on the scaffolding. Additionally, classes in the theoretical part can be conducted remotely, at the client's request, via our online education platform. After a series of lectures on theoretical knowledge, the time comes for the practical part of the course. The practical part consists of exercises in designated facilities. 

Final exam 

At the end of the course, each trainee takes an examination consisting of two parts. The scaffolding assembly course concludes with an examination consisting, like the course, of two parts: theoretical and practical. The exam takes place before an Examination Board appointed by the Institute of Construction and Rock Mining Mechanisation based in Warsaw. The first step is the theoretical part. It consists of a written exam with both closed and open questions. In the next, practical part of the exam, the trainees demonstrate in front of a commission the skills they have acquired during their training in relation to scaffolding work. Among other things, they must demonstrate the assembly and disassembly of the scaffolding themselves. Anyone who passes both parts of the examination will be awarded a scaffolding certificate. 

How much does the scaffold assembler's course cost? 

Our company offers courses for individuals as well as companies wishing to broaden the professional skills of their employees. In the first case, an open course is the best choice. Classes of this type are organised regularly and anyone who meets the basic requirements can take part. Training dates are regularly posted on the calendar on our website, along with prices. If you are interested in becoming certified in scaffolding assembly, please keep an eye on our website for the latest information. 

scaffolding at the block

Companies looking for courses for their employees are welcome to call our consultants (it is also possible to leave your contact details on our website). The price of training courses for companies depends on very many factors. Before contacting our company, we recommend that clients prepare information such as the number of candidates, their level of experience and potential training dates. Scaffolding assembly courses for company employees are held, like the rest of the training, at OSO's head office in Warsaw. However, our company has branches throughout the country where training can also be organised. Additionally our trainers are able to travel to individual customers and conduct a scaffolding assembly course at their company. If you would like to enrol your employees in a competence-enhancing training course, please contact our consultants for an individual offer. We are able to offer all customers a competitive price, in addition, companies willing to enter into a longer-term cooperation with OSO can count on preferential rates. 

What is included in the price of the scaffold assembler course? 

The training price primarily includes the full-time course. In addition to the knowledge transferred itself, OSO also offers our trainees access to a range of facilities as part of each training course: 

  • An online platform with course material to help students prepare for the final exam, 
  • Course completion certificate,  
  • Access to exercise equipment during practical classes, 
  • Additional refreshments for those taking the scaffolding installer course (coffee, tea, biscuits), 
  • Organisation and conduct of the final examination with the committee of the Institute of Mechanised Construction and Rock Mining. 

In addition, our company is able to offer support with the organisation of accommodation for employees commuting to the training from remote locations. Those interested in the offer are encouraged to call our consultants. 

scaffolder
[post_title] => Want to learn how to efficiently and safely install scaffolding? [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => mounting-pipes [to_ping] => [pinged] => [post_modified] => 2023-05-17 11:31:53 [post_modified_gmt] => 2023-05-17 09:31:53 [post_content_filtered] =>. [post_parent] => 22 [guid] => https://oso.edu.pl/?page_id=2402 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[23] => WP_Post Object ( [ID] => 2158 [post_author] => 6 [post_date] => 2022-04-23 12:08:53 [post_date_gmt] => 2022-04-23 12:08:53 [post_content] =>

Fiber optic welding course

various wires

Sign up today for the Operators Training Centre's fibre optic welding course. Years of practice in training quality professionals and affordable prices - that's what sets us apart from the competition! 

For whom? 

Whether you are taking your first steps in the welding industry or considering expanding your existing competences. Or do you just want to refresh and consolidate the skills you already have? The OSO offer is just for you! The conditions you need to meet are: 

  • at least 18 years of age, 
  • minimum primary education. 

Training programme? 

On our course, you will easily acquire the theoretical knowledge of the construction, function and operation of a fibre optic welding machine and then apply the information you have acquired in practice. What specific topics are included in the curriculum?  

  • How to clean and prepare the cable for sealing? How to use the Stripper. 
  • Design, technical specification, classification and use of fibre optic splicers. 
  • Fibre optic technology in general. What types of fibre optics are there, how do they work, how do they differ from each other? 
  • Potential damage to which the optical fibre is exposed (attenuation, material loss, waveguide loss, micro- and macro-bending) and how to prevent it? 
  • How to conduct performance tests? 
  • Health and safety basics. 
https://youtu.be/fbhrpIbdT0k

Where do we provide training? 

We conduct classes throughout Poland, including in Warsaw, Krakow, Katowice, Wrocław, Lublin, Łódź, Gdańsk, Szczecin, Poznań, Białystok and Bydgoszcz. We can also travel to the client's company.  

What after the course? 

Graduates of our training courses receive an unlimited certificate as a fibre optic welder from the Office of Technical Inspection. With it in hand, they have a solid basis for opening their own fabrication workshop, finding a job in the telecommunications or electrical engineering sector. 

If you have any questions or concerns, please do not hesitate to contact us. 

welding of optical fibers
[post_title] => Fiber Optic Welding [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => welding-swiatlowodow-course [to_ping] => [pinged] => [post_modified] => 2023-05-19 15:44:14 [post_modified_gmt] => 2023-05-19 13:44:14 [post_content_filtered] =>. [post_parent] => 2104 [guid] => https://oso.edu.pl/?page_id=2158 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[24] => WP_Post Object ( [ID] => 3183 [post_author] => 9 [post_date] => 2023-09-01 12:34:51 [post_date_gmt] => 2023-09-01 10:34:51 [post_content] =>

The training course (BTT) Mechanical - Mechanical module is dedicated to wind turbine technicians.

The OSO Operator Training Centre invites you to basic technical training (BTT) Mechanical (Basic Technical Training) module. Thanks to the training BTT Mechanical organised by OSO, you will acquire the mechanical skills necessary for your profession as a wind turbine technician. The knowledge gained at our centre will enable you to safely perform basic mechanical tasks in a wind turbine environment. 

Wind turbines

The priority training objective is to prepare employees to work in a wind turbine environment. Participants in the course will learn safe working procedures and, under the guidance of an experienced technician, learn to perform basic mechanical tasks. 

At our centre, we offer the opportunity to gain competence and knowledge under the guidance of experts in the field. Our courses BTT Mechanical cover the entire country - both at our headquarters in Warsaw and in our field branches, as well as in the form of open and closed training courses. Choosing to take part in a course BTT Mechanical, you can count on attractive financial conditions. 

Purpose of the training

BTT Mechanical - Basic technical training, mechanical module 

The aim of the mechanical module training BTT Mechanical is to acquire the theoretical knowledge and practical skills to successfully perform mechanical tasks in a wind turbine environment.  

Training participants

Programme

Training BTT Mechanical - Basic Technical Training has been constructed on the basis of the requirements of the Office of Technical Inspection and current legislation. Our aim is to present you with the most important issues related to the safe performance of mechanical tasks in a wind turbine environment. During theoretical and practical training, participants will become familiar with the key components of mechanical systems, personal protective equipment, learn about potential hazards and acquire the manual skills to work in a wind turbine environment. 

The mechanical module is an element from a package of three Basic Technical Training courses. The trainee can complete the modules in any order, independently of each other. The training is conducted under the supervision of an experienced technician using safe operating procedures and appropriate personal protective equipment (PPE) in accordance with GWO standards. The course includes, but is not limited to: 

  • learning about the key components of mechanical systems and the basic operation of wind turbines; 
  • identification of potential hazards and risks associated with working on mechanical systems; 
  • understanding of the principles of welded and bolted joints, together with their inspection; 
  • practical skills in using hand tools for tightening and measuring; 
  • correct use of hydraulic tools for torque measurement and tensioning; 
  • Familiarise yourself with the operation of the brake system, gearbox and how to check them; 
  • understanding of the functions of the azimuth system, cooling system and lubrication system and how to control them; 
  • learning about the function of the deflection system; 

The OSO Training Centre programme aims to provide participants with sound knowledge and skills to perform professionally in the area of wind turbines. 

Entitlements

We are accredited by DNV and GWO 

Training BTT Mechanical is held in accordance with the current GWO standard. Upon completion of the course, participants will receive a certificate GWO BTT Mechanical Module confirming their qualifications and skills in working safely at heights.  

The certificate received is an official attestation of the participant's completed training and confirms the skills acquired. 

The certificate is valid indefinitely. 

Requirements

  • at least 18 years of age  
  • at least a secondary education 
  • valid certificate from an occupational physician that there are no health conditions for working at a height of more than three metres 
  • social security or accident insurance paid 
  • having a WINDA ID number 
  • completed medical questionnaire 
  • work clothes, work footwear and gloves 
  • paid training fee 
  • identity document. 

The upper weight limit for a person taking part in training at height is 135 kg 

Price

Price of training BTT Mechanical is determined on an individual basis. The fee depends on the number of participants attending. We offer attractive discounts for larger groups. 

Duration of training: 2 days 

Teaching venue 

We provide training at various locations, including Warsaw and our regional branches throughout the country. We also offer training at the client's premises, including travel to the client.  

All information regarding open courses is available on our website. If you are interested in closed training, please contact us - our centre will prepare a personalised offer for you. 

If you need more information, we are ready to answer all your questions about our courses. Feel free to contact us by phone or email and visit our Centre, where we will be happy to present our offer, help you dispel your doubts and prepare a training quote. 

Welcome to the CSO Operator Training Centre for training courses BTT Mechanical - Warsaw and all over Poland! 

[post_title] => BTT Mechanical - Warsaw and all over Poland [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => btt-mechanical-warszawa-i-cala-poland [to_ping] => [pinged] => [post_modified] => 2023-10-10 17:12:54 [post_modified_gmt] => 2023-10-10 15:12:54 [post_content_filtered] =>. [post_parent] => 3148 [guid] => https://oso.edu.pl/?page_id=3183 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[25] => WP_Post Object ( [ID] => 1906 [post_author] => 3 [post_date] => 2021-08-13 12:11:58 [post_date_gmt] => 2021-08-13 12:11:58 [post_content] =>

We encourage you to read the answers to the questions most frequently asked by our clients, collected below. They relate to organizational issues, the thematic scope of training, as well as issues related to exams and qualifications.

If you do not find the answer to your question below, please feel free to contact us.

We invite all interested parties who meet the following criteria:

  • They have at least primary education
  • They are over 18 years old
  • They have no health contraindications for working with the device (confirmed by a medical certificate or a hand-signed statement)

We train both company employees and individual clients. We offer courses at various levels of advancement.

Yes, most of the trainings can also be attended by those who have not worked with a given type of devices yet. During registration, we determine the qualifications and education of the candidate and, on this basis, we offer him / her participation in training in the appropriate group.

We require basic knowledge and skills in specific areas only for candidates for restorers. In order for the issues raised during the training to be understandable, the participant should have knowledge in the field of electrical engineering (be able to read electrical diagrams), power hydraulics, mechanics (eg on fit tolerances or types of detachable and inseparable connections), kinematic diagrams. In the Center, you can also sign up for other trainings supplementing the knowledge of students, for example training from the first group on the operation and supervision of energy devices.

In our Center, we also train people who have already dealt with a given type of equipment, for example those who work in auxiliary positions, but do not have permissions. The courses may also be attended by people who obtained qualifications under the old rules and need to update them.

We offer reduced-time courses to such people. We determine the training needs of a given student when enrolling in classes.

The offer of the Center includes training on devices covered by technical supervision, training in the field of electricity and energy, and other professional training. A full list of topics with training programs is available on our website.

Interested customers are welcome to contact us by phone or e-mail. During the first interview, we define the needs of the student or students and present them with available dates and prices.
Business clients who want to enroll their employees on the course, please prepare information about them: education, experience, qualifications. We also require similar information from individual clients. This allows us to properly assign participants to class groups.
Payment takes place:

  • For individual customers: via the mBank PayNOW or BLIK system, type Przelewy24, referring to the appropriate bank of the Customer
  • For business customers: on the basis of a proforma or - if agreed with the Centre - with deferred payment

A person signing up for the training has the option of additional registration of other people: colleagues or employees. A student who registers is registered in the system as an entity under which other registered persons are subject. Optionally, these people can be saved as separate entities.

We regularly publish the dates for each training on the website. For the most popular training topics, we organize classes every week or every two weeks. In other cases - usually not less frequently than every month.

For organized groups, for example employees of one company, we can propose other convenient dates of classes.

The hours of classes are varied, so that both full-time and non-working people can participate. Some of the classes are held on weekends and in the afternoon, which allows you to combine work and study.

Open courses, available to all participants, are organized in Warsaw, as well as in the Center's branches in other large cities.

In the case of closed training, the Center's instructors can organize training for the client in other locations in Poland. Classes at the company's headquarters require the client to ensure appropriate safety conditions, as well as technical (equipment) and training facilities (classroom). We also require that the provided equipment is operational, with a valid periodic technical inspection and inspection by a conservator.

In order to make it easier for you to participate in the classes, we offer you the possibility to participate online. In this way, you can participate in the theoretical part of the class, after which you must sign up for the practical part. Such training takes the form of webinars - lectures delivered live by our instructors, broadcast on a training platform. Participants who purchase access to the webinars receive fast login details by email and SMS.

Hardware requirements for people who want to take part in online training:

  • Computer, laptop not older than 6-7 years old or tablet, smartphone
  • Operating system installed: Windows or Macintosh
  • Software: the webinar platform is browser-based, opens like a website. There is no need to install any additional software

The exact cost of attending a training course is given to those who contact the Centre to register for a course. It is not possible to give one standard price for all courses - it depends on several factors:

  • Course theme
  • Forms - whether it is open or closed training. We can always offer lower rates for clients who organize closed training for their employees than for individual clients
  • Time left until the start of the course. The price may vary depending on whether there are a lot of places left for training or are already running out.

The training price includes:

  • The number of hours of theoretical and practical classes specified at the beginning
  • Equipment, materials and devices necessary during practical classes
  • Access to the educational platform for each participant
  • Simplified Training Completion Supplement. For an additional fee, the Center also issues a certificate compliant with the relevant international standard in Polish or English
  • During coffee breaks, refreshments: coffee, tea, cookies
  • If necessary - assistance in accommodation and organization of meals
  • If the training ends with an external examination - cost of organising the examination

The detailed program of each course can be found on the page with its description. During the course, participants gain theoretical knowledge about the construction of devices, health and safety rules, operation and maintenance, and then have the opportunity to use the acquired knowledge during practical classes.

Classes take the form of a lecture activating the participants, they are held on-site or online, as webinars. The tutor asks the participants questions, encourages them to answer, and checks their learning progress on an ongoing basis by conducting tests.

During the course and after its completion, participants can supplement and consolidate their messages using the training platform, to which they receive access after signing up for the course. Training scripts and additional videos on device operation are posted on the platform. There is also a large database of test questions to help you prepare for the exam.

We believe that the curriculum is not easy, and the students must also consolidate the material on their own before the exam. On our part, we strive to maintain the highest possible standards of education. Our training programs are agreed with the units checking the candidates' qualifications (UDT and others). The issues raised during the training meet the examination requirements. In addition, we try to modify and update the material on an ongoing basis, taking into account changes in the course of exams, as well as changes in regulations and standards.

Practical classes are organized in such a way as to prepare students for the exam in the best possible way. Devices from the technical base of the Center are used on them. Participants have the opportunity to practice such issues as preparing the equipment for work, choosing the right device, starting and operating, rules of conduct in the event of accidents and failures. These are the issues raised during the interview during the practical exams.

Thanks to a special system, students can choose the hours of classes: morning or afternoon, also on weekends. The Center's system is also used to assess the student's progress by the instructor. Only those persons who obtain the appropriate number of points may be admitted to the external examination.

The duration of such activities varies from group to group. The center creates groups in such a way that people with a similar level of experience take part in them. While some who have already dealt with a given type of equipment it takes an hour or two to master the operation, others often take up to 10 hours.

The center has its own training halls with the equipment needed for practical classes in Warsaw (Ursus), Kraków and Katowice. The training devices are representative of a given type, for example, various types of mobile platforms: A and B type, slow-moving and self-propelled, scissor lifts, boom lifts. Linde, Toyota, Jungheinrich, JCB devices are used for the classes in the operation of forklifts and telescopic loaders: front trucks, with variable reach, lifting the operator. Gantry cranes are used in the courses in the handling of overhead cranes.

Inspectors of organizations such as the Office of Technical Inspection, Transport Technical Supervision or the Association of Polish Electrical Engineers (depending on the subject of the training) carry out external examinations. However, the center acts as an intermediary in the organization of such exams to make it easier for students to pass them. Performs records, sends reminders about the upcoming exam date, cooperates with UDT and other units.

Training dates are specifically arranged to coincide with exam dates as much as possible. This also applies to courses for companies - if they are scheduled well in advance, the waiting time for employees to take the exam can be as little as a few days.

The bodies conducting the examination (UDT, TDT, SEP, SIMP) are responsible for granting authorisations. Permits are issued to persons who have passed a theoretical and practical examination. The time taken for them to be issued should be seven working days (in some cases this can extend to as many as 30 working days).

Qualification certificates are valid for 5 or 10 years. Before the expiry of this period, the Center, if possible, tries to send reminders by e-mail with information that it is necessary to extend the rights.

Permissions are a document that allows you to perform work in Poland. In other countries, even completing the training may suffice to work - this applies to countries where the law does not regulate the practice of the profession. In others, additional recognition of eligibility may be necessary.

Such a situation may take place when an authorized person breaks the provisions or rules of work safety.

Polish qualifications may or may not be recognised in countries whose regulations similarly regulate the acquisition of a profession. Within the European Union, the situation is quite clear - member states are bound by the Mutual Recognition Directive. Also in Switzerland or Norway, there should be no problem with taking up employment on the basis of Polish qualifications - they can be exchanged for those valid in these countries. However, Polish documents are not sufficiently recognisable in the world to be universally honoured, even after translation.

A good solution for people who want to go abroad to work is to purchase an additional certificate in English, issued by CERT (UDT unit). The Center itself also, for an additional fee, issues certificates of completion of the course in accordance with international standards. Both documents are universally recognized in many countries.

[post_title] => Frequently asked questions [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => faq [to_ping] => [pinged] => [post_modified] => 2021-10-03 22:51:54 [post_modified_gmt] => 2021-10-03 22:51:54 [post_content_filtered] =>. [post_parent] => 0 [guid] => https://oso.edu.pl/?page_id=1906 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[26] => WP_Post Object ( [ID] => 2165 [post_author] => 7 [post_date] => 2022-04-23 12:59:00 [post_date_gmt] => 2022-04-23 12:59:00 [post_content] =>
operator talks to manager

The Operators Training Centre is a company with many years of training and professional experience. Our offer includes not only forklift courses, but also training for various types of mobile platforms, overhead cranes, telescopic handlers, basket lifts, HDS courses. We provide highly qualified staff, comprehensive training covering both theoretical and practical knowledge.  

We provide a professional service, ensuring positive end results for our clients, as well as a friendly atmosphere. 

Curriculum 

Training takes place in two modes: remote and on-site. Remotely, lectures take place via webinars, i.e. real-time audio-video transmissions, where our lecturers provide all the necessary information on theory. Participants in the course receive knowledge about the construction of the equipment used, health and safety rules, the ability to operate correctly from a theoretical point of view, how to diagnose and maintain the equipment, as well as UDT regulations. Stationary exercises take place in the technical base of our centre, under the close supervision of trainers. The training practice is complemented by professional equipment meeting all safety requirements, the operation of which will be taught during the classes. Participants learn to prepare the equipment for operation, follow safety procedures and operate the equipment correctly. 

https://youtu.be/Bb_1kl-Fu4s

Our requirements 

At least 18 years of age, at least primary education, no contraindications to work in the position.

Categories of entitlement

Machines, due to their separate characteristics - structural elements as well as possible functions - are subject to categorisation. 

Powered stacker trucks with boom and powered stacker trucks with operator, lifted with load, the validity of the licence is 5 years. 

factory work

Powered stacker trucks excluding reach trucks and forklifts with the operator lifting the load, the validity of the licence is 10 years.

Participant in the group 

At OSO, trainees are assigned to a group according to their score on the competency test held at the beginning of the course. In this way, we are able to provide our clients with an authoritative learning dimension. In this way, we are able to better adapt the syllabus and pay more attention to the particular issues that are more important to the individual group. The atmosphere and development opportunities are also more optimal for each participant. What is more, we provide all our students with additional material in the form of short subject tests - this enables them to repeat and consolidate the knowledge they need to pass the final UDT exam. 

[video class="" mp4="https://oso.edu.pl/wp-content/uploads/2023/03/wozki-widlowe-OSO.EDU_.PL-OSO-1.mp4" poster="https://oso.edu.pl/wp-content/uploads/2023/03/okladka-wozek-widlowy-OSO.jpg"][/video].

Forklift truck applications 

Depending on the model of forklift truck, we can distinguish between different applications, from managing hard-to-reach spaces to working in inaccessible conditions (e.g. in a cold store). One of them, which is the subject of our training, is the forklift truck, which is used for transporting goods, unloading and loading, which is why we often encounter it in both large and smaller companies. It takes care of delivering the product from the warehouse to the shop, but also helps with unloading or loading luggage.  

Forklift trucks are widely used in many sectors of the economy, so becoming certified for them greatly expands our competences and strengthens our position in the labour market. When organising a warehouse and running an efficient and continuous exchange of loads from point a to point b, employers already require their employees to be certified to demonstrate their forklift operating skills.  

operation of the machine

UDT exam  

OSO represents its clients in their dealings with the Office of Technical Inspection, and we also act as an intermediary in organising the final examination, qualifying participants to obtain forklift truck licences. The exam takes place in front of a commission from the Office of Technical Inspection, which evaluates the results of the trainees; these are their answers from the theoretical part of the exam, i.e. a test of closed questions, and from the practical part, i.e. an oral answer conducted by an examiner at the device and its operation. The forklift operator's licence will be awarded to those who achieve a positive result from both parts of the exam. 

Before the examination 

In order to obtain the licence, our trainers will provide the trainees with the necessary materials to familiarise them with, among other things, the construction of the forklift, which is essential for safe work and the correct operation of the machine. As mentioned, if the trainee has difficulty in remembering and consolidating knowledge, he or she will be provided with the necessary (additional) material in the form of tests to check and consolidate knowledge. Should more complex issues arise, our trainers will be happy to answer any questions in order to dispel any doubts and provide you with the comfort of concretised theoretical knowledge needed to pass the UDT written exam.  

the equipment is in storage

In the following section, we will focus on teaching the trainees the activities that every operator should know and perform before and after their work. You will also receive the necessary knowledge to operate the machine efficiently. In addition to passing the exam, we aim to provide participants with the necessary health and safety knowledge. Our own health and safety, as well as that of other employees in the warehouse, is a priority. The practical exam will not only test your ability to operate the equipment, but also your knowledge of cargo carriage, knowledge of technical supervision, rules for changing gas cylinders, i.e. all the elements that affect ergonomics and occupational safety. OSO provides you with all this comprehensive knowledge, as well as practical exercises under the supervision of a trainer. 

Our prices 

OSO is characterised by affordable and attractive prices compared to other training centres and we set prices individually . We carry out enrolment for training in a number of branches located throughout Poland. On request, we can carry out training at the customer's premises.  

For more information from the organisation, please see the FAQs on our website. At OSO, we are eager to listen to our client's needs, so please contact us with any questions by phone. We look forward to hearing from you.

forklift course
[post_title] => Forklift truck operator training course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => forklift trucks [to_ping] => [pinged] => [post_modified] => 2023-03-16 01:03:04 [post_modified_gmt] => 2023-03-16 00:03:04 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2165 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[27] => WP_Post Object ( [ID] => 3193 [post_author] => 9 [post_date] => 2023-09-01 13:13:46 [post_date_gmt] => 2023-09-01 11:13:46 [post_content] =>

The (FAW) FIRE Awarness - Fire Protection training course is dedicated to wind turbine workers and those working at height.

The OSO Operator Training Centre invites you to the course (FAW) Fire Awareness - Fire Protection.  The course is designed to familiarise trainees with the basic principles of fire safety, teach fire outbreak prevention, fire extinguishing behaviour and the proper use of firefighting equipment.  

Wind turbines

The OSO training centre fully complies with GWO standards, ensuring a high level of training. The theoretical and practical knowledge acquired will enable you to deal effectively with a fire hazard in the area of wind turbines, maintaining safety standards, in accordance with the guidelines of the (FAW) Fire Awareness. 

At our centre, we offer the opportunity to gain competence and knowledge under the guidance of experts in the field. Our courses (FAW) Fire Awareness cover the entire country - both at our headquarters in Warsaw and in our field branches, as well as in the form of open and closed training courses. Choosing to take part in a course (FAW) Fire Awareness, you can count on attractive financial terms. 

Purpose of the training

(FAW) Fire awareness - Fire protection GWO 

The primary objective of the training (FAW) Fire Awareness organised by the OSO Training Centre is to familiarise participants with the basic principles of fire safety and to teach them how to act in fire emergency situations. The course participants will gain knowledge of fire safety legislation and practical skills to properly assess the extent of the fire danger, as well as how to effectively and safely extinguish a fire using basic extinguishing agents. 

Course participants in class

Programme

Fire protection training GWO (FAW) Fire Awareness has been constructed on the basis of the requirements of the Technical Inspection Authority and current legislation. The training includes familiarisation with legal aspects, learning how to deal with fire hazards on wind turbines and practical exercises based on realistic scenarios. 

At the end of the course, the participant will have acquired knowledge in: 

  • identify the causes of wind turbine fires and the associated risks; 
  • recognising early signs of fire within turbines; 
  • creating personalised emergency plans for wind turbines, including fire detection strategies and detailed evacuation procedures; 
  • combating the spread of fire and giving characteristics of the course of the fire; 
  • the effective conduct of firefighting operations at wind turbines, including the proper use of basic firefighting measures; 
  • skills to create emergency plans for wind turbines, including fire detection and evacuation procedures; 

The CSO Training Centre programme aims to provide participants with sound knowledge and skills to respond professionally to wind turbine fire situations. 

Crops

We are accredited by DNV and GWO. 

Training (FAW) Fire Awareness takes place in accordance with the current GWO Basic Safety Training standard.  

Upon completion of the course, participants receive a certificate confirming the completion of the training and the acquisition of qualifications and skills in the area of fire protection. With the skills acquired, the trainee is prepared to work safely both in the wind energy sector and in other environments where there is a risk of fire.  

Requirements

The following requirements must be met in order to work at heights:

  • Adult 
  • At least secondary education 
  • valid certificate from an occupational physician that there are no health conditions for working at a height of more than three metres 
  • social security or accident insurance paid 
  • having a WINDA ID number 
  • completed medical questionnaire 
  • paid training fee 
  • identity card 
  • working clothes (gloves and working boots) - needed for the activities on the fire training ground 

The course is important: 24 months 

Maximum number of participants per group: 10-12 persons 

Price

Price of training (FAW) Fire Awareness is determined on an individual basis. The fee depends on the number of participants attending. We offer attractive discounts for larger groups. 

Duration of training: 1 day 

Teaching venue  

We provide training in various locations, including Warsaw and at our regional branches throughout the country. We also offer on-site training, including travel to the client.  

All information regarding open courses is available on our website. If you are interested in closed training, please contact us - our centre will prepare a personalised offer for you. 

If you need more information, we are ready to answer all your questions about our courses. Feel free to contact us by phone or email and visit our Centre, where we will be happy to present our offer, help you dispel your doubts and prepare a training quote. 

Welcome to the CSO Operator Training Centre for training courses (FAW) Fire Awareness - Warsaw and all over Poland! 

[post_title] => (FAW) Fire Awareness - Warsaw and entire Poland [post_excerpt] => [post_status] => publish [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => faw-fire-awareness-warszawa-i-cala-poland [to_ping] => [pinged] => [post_modified] => 2023-10-10 17:13:12 [post_modified_gmt] => 2023-10-10 15:13:12 [post_content_filtered] =>. [post_parent] => 3148 [guid] => https://oso.edu.pl/?page_id=3193 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[28] => WP_Post Object ( [ID] => 2940 [post_author] => 3 [post_date] => 2023-03-15 00:47:34 [post_date_gmt] => 2023-03-14 23:47:34 [post_content] => [video class="" mp4="https://oso.edu.pl/wp-content/uploads/2023/03/zuraw-OSO.EDU_.PL-OSO-1.mp4" poster="https://oso.edu.pl/wp-content/uploads/2023/03/okladka-podnosnik-OSO-1.jpg"][/video]. [post_title] => Tower crane course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-on-trail-runs [to_ping] => [pinged] => [post_modified] => 2023-03-15 00:47:35 [post_modified_gmt] => 2023-03-14 23:47:35 [post_content_filtered] => [post_content_filtered] => [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2940 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[29] => WP_Post Object ( [ID] => 2942 [post_author] => 3 [post_date] => 2023-03-15 00:48:49 [post_date_gmt] => 2023-03-14 23:48:49 [post_content] => [video class="" mp4="https://oso.edu.pl/wp-content/uploads/2023/03/ZURAW-PRZENOSNY-oso.edu_.pl-OSO-1.mp4" poster="https://oso.edu.pl/wp-content/uploads/2023/03/okladka-podnosnik-OSO-1.jpg"][/video]. [post_title] => HDS crane course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-on-trail-hds [to_ping] => [pinged] => [post_modified] => 2023-03-15 00:48:50 [post_modified_gmt] => 2023-03-14 23:48:50 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2942 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[30] => WP_Post Object ( [ID] => 2690 [post_author] => 6 [post_date] => 2023-03-21 16:25:13 [post_date_gmt] => 2023-03-21 15:25:13 [post_content] =>

Mobile crane operator 

We provide training for mobile crane operators. We have a wide range of classes and offer a high level of service. The knowledge acquired on our course is sure to come in handy in any industrial sector and improve the operation of your plant. 

truck crane on site

What does the course look like?  

Our classes are divided into two main parts: theoretical and practical. In the practical part, we learn to use all mobile crane systems on practice equipment. Theory, on the other hand, requires attending lectures that introduce everything you need to know about the equipment on which the trainee is working.  

In our classes we teach:   

  • equipment hydraulics and electronics,  
  • the correct and economical handling of equipment at the workstation,  
  • workstation preparation,  
  • equipment review,  
  • working in different conditions,  
  • everything to do with UDT,  
  • equipment category,  
  • required formalities,  
  • HEALTH AND SAFETY.  

Final examination 

Completing our course does not mean you are qualified and able to work. First of all, you still have to pass a state examination before the Technical Inspection Commission. The examination, like the training, consists of a theoretical and a practical part. Our training always takes into account all applicable requirements for its completion.  

Courses - location  

All courses are held at the company's headquarters in Warsaw and regional offices throughout Poland. We take into account the possibility of holding classes at the client's premises. The course may be closed or open. Price and date depend on the interest in a particular training course. More information is available on our website.  

mobile crane on the road

Completion of the course

Completion of the training course ensures the acquisition of all the skills necessary to operate mobile cranes. The graduate must be able to handle work in a variety of conditions without difficulty, be familiar with the construction and technical parameters of the equipment, be able to detect and rectify simple faults and know how to use the equipment safely. These skills should make it easier for him or her to find work as a mobile crane operator in a wide variety of industries. 

Requirements for trainees 

Candidates for the course must:  

  • be at least 18 years old,  
  • obtain a medical certificate to confirm that you can practise the profession in question,  
  • have a minimum of primary education. 

Mobile cranes - definition 

A mobile crane is a crane built on a typical suitably reinforced truck chassis or a specially designed mobile chassis, driven by one or two engines, only one of which is the so-called drive motor. Mobile cranes are mainly used in the construction industry for the assembly of industrial enterprises, and are used for transport and loading work in workshops, ports, warehouses, transport depots, etc.  

Design of mobile cranes 

The truck crane consists of winches and a pivoting boom, attached to a rotating base (column), which allows the load to be raised and lowered and transferred by rotating the base and controlling the arm. The machine can operate in two modes: transport and hoisting. In the latter mode, the frame is usually raised on extendable supports attached to the machine to ensure stability. 

mobile crane lifts load

Breakdown  

Mobile cranes are differentiated according to the type of drive:  

  • combustion-mechanical drive,  
  • diesel-electric drive,  
  • diesel-hydraulic drive. 

In turn, depending on the type of platform on which the crane is installed, we distinguish:  

  • wheeled crane, 
  • off-road crane,  
  • mobile crane, 
  • crawler crane. 

Advantages of mobile cranes 

A mobile crane is a piece of equipment best suited to work at height that requires heavy loads to be transported. With equipment such as mobile cranes, it is easy to transport, load and unload all the components necessary for the work. A self-propelled crane for construction applications, with a suitable reach range, can also be used in the assembly of demanding structures and during renovation work. The long outriggers, high lifting capacity and wide range of equipment and safety features provide a high degree of flexibility and cost-effectiveness not offered by other types of equipment. 

Technical specifications 

crane operator at work

Crane weight - the dead weight of the crane with counterweight and main boom. 

Reception - the horizontal distance from the axis of rotation of the rotating part of the crane to the vertical axis of the loading device. 

Crane capacity - the maximum load for which the equipment is designed and for which the manufacturer guarantees correct operation. For cranes, the maximum capacity is taken at the smallest permissible boom length or span. The lifting capacity does not include the weight of the base and hook. 

It should be noted that the lifting capacity of a crane depends on:  

  • Extension lengths,  
  • boom lengths,  
  • boom angle,  
  • type of rigging,  
  • crane support.  

Lifting height - the vertical distance from the crane's axis of alignment to the support surface of the loader when it is in its top operating position. 

The moment of lifting - A value which defines the capacity of a crane to move loads of a specific weight, taking into account the variation of the lifting capacity with the span. The lifting moment is to be understood as the weight of a specific load that hangs on a specific span of the crane.  

Lowering depth - The vertical distance from the crane's position plane to the loader at its maximum downward position. This depth can be increased by the height of the load and the length of the suspension.  

Swivel angle - As a rule, truck cranes have the ability to completely rotate the boom. This can only be limited by the load in question. 

QUESTIONS FROM STUDENTS

Mobile cranes are heavy industrial equipment consisting of a boom ending in a hook, attached to a truck. They are used for specialised transport work in locations such as construction sites.

No, you only need to have at least an elementary education to take part in the training.

[post_title] => mobile cranes - operator's licence course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => crane-self-driving-course-with-service [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:18:24 [post_modified_gmt] => 2023-03-22 14:18:24 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2690 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[31] => WP_Post Object ( [ID] => 2435 [post_author] => 7 [post_date] => 2022-08-11 11:43:51 [post_date_gmt] => 2022-08-11 11:43:51 [post_content] =>
UDT qualifications

Those who are responsible for the maintenance and filling of portable tanks with liquefied, compressed and dissolved gases must be qualified and authorised to do so. Therefore, you can find courses in filling and maintenance of portable tanks in our offer.  

The training is designed to prepare in theory as well as in practice for the independent operation of tanks.  

What does the training look like? 

The theoretical part is devoted to the construction of the equipment, technical supervision, as well as filling the tanks according to health and safety guidelines. In the practical part, the trainees put their acquired knowledge into practice. At the end of the course, participants are also prepared to take an examination before the Technical Inspection Authority. We have well-trained and experienced instructors who are always available and willing to help. We also provide plenty of training materials to help you absorb the information you have acquired effectively. We take an individual approach to our trainees and the timing and scope of the course is tailored to their needs.  

To participate in the training, you must meet the following requirements:  

  • be at least 18 years old,  
  • have a minimum of primary education, 
  • have no health contraindications.  

How much does the course cost? 

The price for training is set individually depending on the number of people, for larger groups there is the possibility of attractive discounts. Detailed information on the course can be found on our website. Should you have any questions, please do not hesitate to contact us. 

portable tanks

What are portable tanks? 

Portable tanks for the purposes of the regulations are defined as tanks that change their location between filling and emptying and vehicle tanks. Portable tanks include, but are not limited to: 

  • extinguishing tank,  
  • the boot of the breathing apparatus,  
  • diving apparatus bottle, 
  • the tank of a special device.  

The following are brief descriptions of the individual tanks. 

Fire extinguisher receptacles 

It is a device, usually portable, used to extinguish fires. Small extinguishers are used in cars, larger ones in public and industrial facilities. The fire extinguisher is an essential tool in the event of a fire. It is a portable or transportable red cylinder with a tube or nozzle through which the extinguishing agent is discharged. They are characterised by their light weight and ease of use. As a result, anyone can use this equipment, even people with no experience. Depending on the application and the type of facility to be protected, several types of extinguisher containers can be distinguished: 

breathing apparatus
  • Powder - the extinguishing agent is powder, discharged by means of a compressed gas (air, nitrogen, carbon dioxide) at a pressure of 16atm. It has applications for solids, liquids and gases; the extinguisher will be useful for larger fires and small fire sources; it consists of a cylinder in which the gas is placed. The operating range is -40°C to +50°C ; extinguishers should be recharged once every 5 years. 
  • Foam - the extinguishing agent is foam created from a concentrate of foaming agent and water, which is expelled under the influence of compressed gas. It is used to extinguish organic solids, flammable liquids, oils and fats. 
  • Snow - the extinguisher is filled with liquid carbon dioxide, which expands when opened and has a temperature of -80°C , forms a form of dry ice on the surface and leaves no residue. The extinguisher consists of a thick-walled cylinder, a flexible hose and a tube, and is usually used when extinguishing flammable liquids; 
  • Mist - the extinguishing agent is water mist, or demineralised water. The main advantage of this type of extinguisher is the lack of damage to property, extinguishers are used in hotels, warehouses, garages, shops, etc. 

Breathing apparatus cylinders 

A breathing apparatus is personal protective equipment that is used in an airborne environmental emergency. Two types of protective equipment can be distinguished: isolation equipment, which has its own supply of oxygen or air, and equipment for which air is supplied from the outside. An important component of protective equipment is the compressed air cylinder. We can distinguish between two types of cylinder:     

Type Definition 
Steel are used to supplement air equipment, are used as a container for a standard air mixture with a permissible working pressure of 300 bar; they are made of chrome-nickel-molybdenum steel and weigh about 10 kg 
Composite for use with open-circuit breathing apparatus, made of carbon fibre, glass fibre or epoxy resin, cartridge made of aluminium 

Diving cylinders 

A diving cylinder is one of the main pieces of equipment for a diver and is an essential part of any breathing kit. It is a container that is designed to store compressed gas. Usually such cylinders are manufactured from steel or aluminium. Steel cylinders are ideal for diving in freshwater. Compared to aluminium cylinders, they are lighter and more evenly balanced. Unfortunately, steel cylinders corrode very quickly and are more prone to rusting, especially in seawater. When diving in saltwater, an aluminium cylinder is a better option. It is more resistant to rusting and the salt water is not as damaging. Each cylinder has a neck, a cup, a jacket and a bottom. The neck is located at the top of the cylinder and this is where the valve is located. The cup has all the information associated with the type of cylinder. The bottom is made of the thickest layer of material, steel cylinders usually have a round bottom so that they can be stood up. Diving cylinders have different operating pressures, from 150 at to 300 at, and vary in capacity from 1 L to 18 L.  

You are more than welcome to contact us and take advantage of our offer! 

UNO operator
[post_title] => Portable tank filling training courses [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => tanks-transferable [to_ping] => [pinged] => [post_modified] => 2023-03-14 15:18:01 [post_modified_gmt] => 2023-03-14 14:18:01 [post_content_filtered] => [post_content_filtered] => [post_parent] => 2218 [guid] => https://oso.edu.pl/?page_id=2435 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[32] => WP_Post Object ( [ID] => 2948 [post_author] => 5 [post_date] => 2023-03-15 10:56:53 [post_date_gmt] => 2023-03-15 09:56:53 [post_content] =>

A rail crane, otherwise known as a tower crane or harbour crane, is a crane used in ports for loading and unloading goods.

rail crane training

This type of crane, like all cranes, is subject to technical supervision, which means that in order to be an operator or maintainer, you have to pass an exam before the UDT commission in order to obtain a licence. However, before you take this exam, it is necessary to take part in a training course, where you will gain theoretical knowledge and then apply it during practical exercises with the machine, learning how to operate it.
Our centre offers courses for both future operators and maintainers (one person can do both courses and apply for certification for both positions).

Individual clients, groups and companies are welcome. On request, the course can be held at a designated location.

rail crane at work in the harbourDuring the theoretical lectures you will learn:

  • What technical supervision is and why it is so important,
  • you will learn about the characteristics, function and construction of rail-mounted cranes,
  • you will become familiar with the technical documentation of the cranes,
  • you will learn about your rights and responsibilities as an operator and/or maintenance person,
  • the occurrence of dangerous situations - how to deal with them and how to prevent them,
  • operation, how to use/control the equipment properly,
  • safe operation of rail-mounted cranes,
  • health and safety regulations,
  • technical condition assessment,
  • proper maintenance,
  • repairing and preventing failures.

Each participant will then take a practical course, where all the knowledge gained will be applied when working with cranes and learning how to operate them safely. The maintainers, on the other hand, will learn how to keep the machines in good condition and safe for use by the operator.

The whole course concludes with an exam passed before a UDT commission, on the target machine. If you pass, you will receive a certificate allowing you to work with rail-mounted cranes. This entitlement is valid for 5 years from the date of passing the exam, with the possibility of extension. The prerequisite for this is a minimum of three years' work during this period and the submission of an application no later than three months before the expiry date.

To participate in the training, the following requirements must be met:

  • be of legal age,
  • have a minimum of basic education,
  • no health contraindications (documented),
  • adequate mental state (documented),
  • knowledge of the Polish language to be able to communicate freely and to take the examination. If this is not available, the presence of a sworn translator is required.

Career opportunities

rail crane trainingOur centre employs people with many years of experience both in being operators and maintainers and in passing on knowledge. We know the latest information and regulations related to working with cranes. By learning with us, you can be sure that the knowledge you gain will be useful in your future work. What is more, with UDT qualifications you can work not only in Poland, but also in the whole European Union, which definitely helps you to get a well-paid job, as crane operators are a very necessary profession on the labour market. Moreover, you can also start your own business. One training course gives you many opportunities.

And if you have any further questions, please do not hesitate to contact us.

Questions and Answers

Training courses are for both individuals and companies. Course participants only need to meet a few requirements: be 18 years old, have a basic education, good physical and mental health and know the Polish language or have a sworn translator. 

The operator can also work as a maintenance man, provided he has received training and passed an examination for both positions.

Yes, entitlements are valid in Poland and throughout the European Union. 

[post_title] => Rail crane qualifications - become an operator or maintainer [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => crane-rail [to_ping] => [pinged] => [post_modified] => 2023-04-25 19:40:28 [post_modified_gmt] => 2023-04-25 17:40:28 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2948 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[33] => WP_Post Object ( [ID] => 1927 [post_author] => 3 [post_date] => 2021-08-16 09:29:38 [post_date_gmt] => 2021-08-16 09:29:38 [post_content] =>

Mobile platforms is the name that describes devices such as aerial platforms, car-mounted platforms, scissor lifts.The course on operating and maintaining mobile platforms makes it possible to become certified by the Office of Technical Inspection. With a qualification for the so-called platforms and lifts, you can easily find employment in construction, transport or advertising companies, as well as in servicing this type of equipment. The completion of the course allows you to operate, among other things, scissor lifts, telescopic lifts, i.e. free-running platforms, mobile platforms, self-propelled platforms, as well as suspended, mast and stationary platforms. The maintenance qualification offers the opportunity to work in periodic inspections, servicing equipment or assessing its technical condition.

The most important information about the training

The course for mobile platforms, the so-called stepladders, is a combination of theoretical and practical classes. It comprehensively prepares for UDT and TDT examinations organised by the Office of Technical Inspection and the Transport Technical Supervision. The centre organises the examinations for participants after the training programme has been completed, making it much easier to gain the mobile platforms licence than if you organise the process yourself. . The centre provides training in accordance with agreed training programmes, has a teaching base and equipment. Classes can be organised on site, in most major Polish cities, or - in part - remotely online. in the form of webinars (for those without practical experience, it is necessary to supplement the on-site classes). The dates and form are adapted to the needs of participants applying individually or those notified by the employer.

What devices is the course about?

In the case of operating mobile platforms, the training and qualifications apply to the following devices:

  • Mobile work platforms (from June 1, 2019 - qualifications for all types of platforms)
  • Freewheeling mobile platforms, or so-called scissor lifts (until 1 June 2019 - category I P rating)
  • Mobile platforms - these are the so-called car-attached spiders (until 1 June 2019 - category I P licence)
  • Vehicle-mounted aerial work platforms, i.e. self-propelled mobile platforms (until 1 June 2019 - category I P rating)
  • Hanging, mast and stationary mobile platforms (until 1 June 2019 - category II P rating)
  • Ramps on railway vehicles

For maintenance training, considerations apply to the following devices:

  • Mobile and loading work platforms, including devices for transporting people
  • Stationary, mast and hanging mobile platforms
  • Mobile platforms at level crossings

[video class="" mp4="https://oso.edu.pl/wp-content/uploads/2023/03/podnosnik-OSO.EDU_.PL-OSO-1-1.mp4" poster="https://oso.edu.pl/wp-content/uploads/2023/03/okladka-podnosnik-OSO.jpg"][/video].

Operation of mobile platforms - training program

The issues in the theoretical part of the course are:

  • General information on operating the platforms
  • Stability and durability of platforms
  • Chassis and supporting structures for devices
  • Safety devices
  • The working platform and its driving mechanisms
  • Using the operating instructions for operating platforms
  • Research and tests of mobile platforms
  • Operation of platforms - principles
  • Carrying out technical inspection

The theoretical part is supplemented with practical training, during which future operators have the opportunity to practice the acquired skills.

Maintenance of mobile platforms - training program

The theoretical part of the course includes:

  • Handling equipment, which includes technical supervision
  • Procedure in the case of supervision of technical devices
  • Technical tests carried out by technical inspection inspectors, the scope of activities that are performed during the tests
  • Dangerous damage and mishaps during the operation of a technical device - the behaviour of the operator and the device's maintainer
  • Health and safety rules for maintenance of equipment
  • Assemblies and elements of maintenance of mobile platforms - mechanical and electrical issues

Practical classes cover the following topics:

  • Verifying the technical condition of platforms
  • Criteria that are used when checking the degree of wear of mechanisms and the correctness of their operation
  • Replace damaged or worn parts with new ones
  • Maintenance of elements, assemblies and safety devices
  • Failures in technical devices - procedure
  • Checking the correct operation of elements and safety devices, adjusting these elements
  • Disassembly and reassembly of the device resulting from the need to change the place of use
  • Examples and methods of removing the most common operating-related faults

Questions and Answers

Agreed training programs provide flexibility. The number of hours depends on the operating and maintenance experience of the participants. It is agreed individually with the participants or with the employer sending employees to the training.

Approximate duration of classes for platform operators:

  • Persons with practical experience - about 8 hours
  • Those who have knowledge and skills but need to complete or update them - approximately 20 hours
  • Those without experience in operating this type of equipment - approximately 35 hours

Approximate duration of classes for conservators:

  • Persons meeting the minimum requirements, with experience in the area of electrical or mechanical engineering (relating to one of the types of equipment) - approximately 32 hours
  • Persons needing to supplement their knowledge in the maintenance of 2 types or types of equipment - approximately 58 hours
  • Persons without experience in platform maintenance - 96 hours - applies to training for 2-3 types or types of equipment

In order to determine the exact price of the training and the organization of the exam, please contact us directly, by phone or e-mail. The price of the course depends on whether it is open or closed, stationary, on-line, in what location it is organized, with what advance time, for what number of people and groups and for what devices, forms of operation (service, maintenance) The price of the course includes:

  • Theoretical classes in the traditional form of group meetings or online, in the form of webinars
  • Practical classes with the use of devices provided by the Center
  • Access to the educational platform with teaching materials for participants: in text form, as well as videos and tests to be taken before the exam (based on UDT tests)
  • Issue of a simplified course completion supplement
  • Issuing of a certificate according to ISO 18878 standard, in the form of a plastic card with a photograph - by individual arrangement with the customer
  • Access to different types of devices
  • Equipment necessary for the operation and maintenance of equipment: health and safety, vests, braces
  • Refreshments during breaks during classes: coffee, tea, cookies
  • If so agreed with the client - assistance in accommodation and organization of meals for participants

The course is intended for people who:

  • They are 18 years or older
  • They have at least primary education
  • They have a medical certificate that there are no contraindications to work in a given position (or confirmed in writing in the form of a declaration that there are no health contraindications)

Our head office is located in Warsaw, but we also organize training at the client's place anywhere in the country. The center has a technical base (maneuvering yard, halls) and teaching facilities with training rooms. We have branches in most large cities: Wrocław, Kraków, Gdańsk, Katowice. In the case of courses outside the company's premises, please contact us in advance to arrange convenient dates.

In order to make it easier for our trainees to learn and gain qualifications, we have launched some of the classes in a remote format. The course participant receives login details on a platform, where classes are held live. These take the form of activating the trainees - the instructor asks questions, conducts quizzes/tests from the UDT, discusses examples. In the case of courses on mobile platforms, it is necessary to complete the knowledge and examination in a stationary form, but some of the other courses we organise (for example, those ending with the SEP, SITP, SIMP examination) can be in a completely remote form.

The classes are designed to prepare clients for the UDT examinations. The authorisations allow you to work in your profession and are valid for 5 or 10 years. Thanks to our many years of experience, we offer support in contacting the UDT Warsaw branch and, if necessary, branches throughout the country. If classes are scheduled well in advance, the UDT can organise a qualification exam for participants as soon as the course is over. This usually takes place within a maximum of a few working days after the end of the class. This allows participants to take the tests on the fly, without having to repeat or recall material.

We offer two options for those who wish to complete the course and take the exam:

  • Scheduling the training close to the next date when the Office organizes the exam (usually up to 30 days)
  • Planning the training so that the students can take the exam the next working day after its end. In this case, please remember to notify your willingness to participate in the course in advance. This may involve additional costs - please contact us for details.

Employers often sign up for their employees for training to supplement their qualifications in the operation or maintenance of mobile platforms. They are often people who have already dealt with this type of equipment, but do not have the necessary permissions to perform the work. Employers employing employees with UDT qualifications for the operation and maintenance of platforms may start the implementation of larger and more profitable orders, as well as participate in tenders requiring qualified staff.

If you are interested in organising a course for more employees, please contact us to discuss the details. We will need information such as the number of people to be trained, their experience of operating or maintaining equipment, the specifics of your business. By carrying out a needs diagnosis, we can tailor the training programme and duration individually. Direct contact will also allow us to determine organisational details: where the training will be organised - whether on site, in Warsaw, or whether our representative is to travel to your premises or to the project.

Participation in a course for a mobile platform operator or a maintenance technician of this type of equipment is an opportunity to acquire qualifications desired on the labor market. Specialists in this field are willingly employed in construction and transport companies, energy companies or equipment services, and you usually do not have to wait long for job offers.

We offer individual clients participation in the course in an open form. We encourage you to contact us by phone or e-mail - we will then propose one of the available course dates. They are usually held once a week or every two weeks, depending on interest. During the telephone interview, we ask customers to provide information about their experience in the field of mobile platforms - this allows us to properly select participants in groups and define the topic of classes. After completing the training, each student can take the UDT exam.

In order to facilitate the preparation for the UDT exam, we offer tests with solutions. The scope and form of the tests are very similar to the questions on the examination of the Office of Technical Inspection. Our database includes about 650 test questions, prepared on the basis of the content provided by the UDT. After completing the course, while waiting for the external exam, the participant may log in to the platform at any time and use sample tests.

Mobile platforms - devices for loading and lifting people and goods, mounted on vehicles or stationary
[post_title] => Mobile platform operation and maintenance course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => science-pods-mobile [to_ping] => [pinged] => [post_modified] => 2023-03-15 00:28:09 [post_modified_gmt] => 2023-03-14 23:28:09 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=1927 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[34] => WP_Post Object ( [ID] => 3209 [post_author] => 9 [post_date] => 2023-09-04 13:18:41 [post_date_gmt] => 2023-09-04 11:18:41 [post_content] =>

The training course (ART) Advanced Rescue Training - Advanced Evacuation Rescue is dedicated to wind turbine workers.

The OSO Operator Training Centre invites you to the course Advanced Rescue Training. The course is designed to familiarise trainees with the procedure for rescue action in a wind turbine, which includes sections such as the inside of the blade, rotor, nacelle, basement, tower and hub. The training rescue operation uses standard equipment, methods and rescue techniques that go beyond those discussed in the working at height module. Students train in rescue both in teams and individually. 

Wind Turbines

The training is dedicated to workers performing duties at height, especially on wind turbines, and to those who have been designated to take part in advanced rescue operations. 

The OSO training centre fully complies with GWO standards, ensuring a high level of training. The theoretical and practical knowledge acquired will enable you to effectively evacuate and apply rescue techniques in an emergency situation, maintaining safety standards, according to the guidelines of the Advanced Rescue Training. 

At our centre, we offer the opportunity to gain competence and knowledge under the guidance of experts in the field. Our courses Advanced Rescue Training cover the entire country - both at our headquarters in Warsaw and in our field branches, as well as in the form of open and closed training courses. Choosing to take part in a course Advanced Rescue Training, you can count on attractive financial terms. 

Purpose of the training

Advanced Rescue Training (ART) - Advanced Evacuation Rescue 

The primary objective of the training Advanced Rescue Training - Advanced Evacuation Rescue organised by the OSO Training Centre is to familiarise participants with advanced evacuation and rescue techniques from the wind turbine area.

Course participants in class

Programme

Training Advanced Rescue Training (ART) includes theoretical and practical classes. The participant will learn a range of evacuation procedures adapted to the specifics of the evacuation site and the number of people involved.   

The training modules have been carefully designed so that participants can cope with both group and individual evacuations. Realistic practical exercises are carried out using high-quality evacuation equipment used on a daily basis in the wind turbine area.  

The training consists of several modules: 

ART-N Nacelle, Tower and Basement Rescue (NTBR) The module lasts 2 days and includes: 

  • legal issues related to advanced emergency operations; 
  • rescue strategies - including the use of appropriate techniques and equipment by suitably qualified personnel; 
  • procedures for evacuating an injured person from the nacelle, tower and basement of a wind turbine; 
  • simulations and training exercises in rescue operations; 

ART-H Hub, Spinner and Inside Blade Rescue (HSIBR) The module lasts 1 day and includes: 

  • legal issues related to advanced rescue operations, rescue strategies (determination of the correct rescue method, use of appropriate technique and equipment by and for appropriately qualified personnel); 
  • procedures for the evacuation of an injured person from a wind turbine tower (WTG), both outside and inside its structure; 
  • selection of approved and design anchor points; 
  • simulations and training exercises in rescue operations; 

SAT-N Single Rescuer: Nacelle, Tower and Basement Rescue (SR:NTBR) The module lasts 1 day and includes: 

  • the precise selection of the rescue method, the intervention technique, the use of certified equipment and the effective organisation of the rescue action at the scene by the individual rescuer. All this in the context of varied rescue scenarios; 
  • implementing rescue methodologies and techniques during the descent and ascent of an individual rescuer from a WTG structure; 
  • supported by an emergency stretcher and an orthopaedic board, including manual manoeuvring as well as the use of a mechanical rescue system for lowering/lifting; 
  • appropriate use of specialised rescue equipment; 

For students who have completed the ART-N Nacelle, Tower and Basement Rescue (NTBR) module. 

SAT-H Single Rescuer: Hub, Spinner and Inside Blade Rescue (SR:HSIBR) The module lasts 1 day and includes: 

  • Analyse and determine the individual rescuer's strategy (including appropriate intervention methods, techniques, certified equipment and how to organise rescue operations and site management) for varied rescue scenarios; 
  • the application of rescue techniques and methods during the descent and ascent of an individual rescuer from a wind turbine structure, using a specialised rescue stretcher and orthopaedic board; 
  • operation of manual and mechanical lowering and lifting rescue systems (including pulley or related rescue devices), and other dedicated rescue equipment; 

For students who have completed the ART-H Hub, Spinner and Inside Blade Rescue (HSIBR) module. 

The course is designed to develop correct and safe habits in participants in accordance with GWO guidelines Advanced Rescue Training (ART). 

At the end of the course, the participant will have acquired knowledge in:  

  • the analysis and development of rescue strategies, including the correct choice of rescue methods, techniques, certified equipment and appropriate personnel, adapted to a variety of rescue scenarios; 
  • assessing and developing evacuation strategies during rescue operations, including the precise determination of the best evacuation routes for injured persons, both outside and inside the wind turbine tower; 
  • identify and properly select anchor points that meet certification criteria and structural requirements, suitable for different rescue scenarios; 
  • understanding and practical application of concepts such as angle of lift, angle factor and deflection, which are crucial during rescue operations; 
  • responding effectively to common hazards associated with hazardous energy sources and the hazards present in confined spaces inside a wind turbine during rescue operations; 
  • The practical application of various rescue methods and techniques during descent and ascent operations from the wind turbine hub area, turntable and blade interior. Rescue stretchers, orthopaedic boards, manual lowering/lifting systems as well as other specialised rescue equipment such as pulley systems are used; 
  • the precise donning of harnesses and other personal protective equipment, such as helmets or goggles, on victims in confined spaces inside a wind turbine tower; 
  • Safely place casualties on rescue stretchers and orthopaedic boards in an upright or horizontal position to allow safe transport. Monitor the condition of casualties, using specialist rescue equipment including cervical collars; 
  •  Communicate effectively in potentially stressful rescue situations, both as coordinator of the rescue team and as a member of that team

Entitlements

We are accredited by DNV and GWO. 

Training Advanced Rescue Training (ART) is carried out in accordance with the current standard GWO Basic Safety Training.  

Upon completion of the course, participants receive a certificate confirming the completion of the training and the acquisition of qualifications and skills in the area of manual handling. With the skills acquired, the trainee is prepared to work safely in life and health-threatening situations in the wind energy industry. 

Requirements

The following requirements must be met in order to work at heights: 

  • Adult 
  • At least secondary education 
  • valid certificate from an occupational physician that there are no health conditions for working at a height of more than three metres 
  • social security or accident insurance paid 
  • having a WINDA ID number 
  • completed medical questionnaire 
  • paid training fee 
  • identity card 
  • workwear (gloves and work boots) 
  • Certificates obtained Working at Height; First Aid; Manual Handling 

The course is important: 24 months 

Maximum number of participants per group: 10-12 persons 

Price

Price of training Advanced Rescue Training (ART) is determined on an individual basis. The fee depends on the number of participants attending. We offer attractive discounts for larger groups. 

Duration of training: All modules together last 4 days 

Teaching venue

We provide training in various locations, including Warsaw and at our regional branches throughout the country. We also offer on-site training, including travel to the client.  

All information regarding open courses is available on our website. If you are interested in closed training, please contact us - our centre will prepare a personalised offer for you. 

If you need more information, we are ready to answer all your questions about our courses. Feel free to contact us by phone or email, or visit our Centre, where we will be happy to present our offer, help you clear up any doubts and prepare a training quote. 

Welcome to the CSO Operator Training Centre for training courses Advanced Rescue Training (ART) - Warsaw and all over Poland! 

[post_title] => Advanced Rescue Training - Warsaw and all over Poland [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => advanced-rescue-training-warszawa-i-cala-poland [to_ping] => [pinged] => [post_modified] => 2023-10-10 17:12:43 [post_modified_gmt] => 2023-10-10 15:12:43 [post_content_filtered] =>. [post_parent] => 3148 [guid] => https://oso.edu.pl/?page_id=3209 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[35] => WP_Post Object ( [ID] => 2701 [post_author] => 6 [post_date] => 2023-03-03 16:21:54 [post_date_gmt] => 2023-03-03 15:21:54 [post_content] =>

Repair of telescopic loaders 

equipment during construction work

Our company "OSO" specialises in the comprehensive repair and modernisation of telescopic handlers. If you entrust us with a piece of equipment from the materials handling segment, you will be convinced of the level of our services. We carry out repair work using high-quality spare and original parts.  

Our specialists will comprehensively repair and upgrade your equipment and prevent further malfunctions. Initially, our qualified specialists will carry out a diagnostic and audit to check the cause of the fault and eliminate it. 

Service

We have several years' experience in servicing materials handling equipment and qualified specialists, thanks to which we carry out services at the highest level.  

Work carried out as part of the service

  • modernisation,
  • overview, 
  • diagnostics,
  • general refurbishment,
  • maintenance,
  • repair or replacement of a component,
  • post-accident and post-crash inspections. 

The efficiency of materials handling equipment is essential to continue working, even the smallest fault can prevent us from doing so. It is essential to get rid of the fault as quickly and effectively as possible.

Other equipment

In our offer, we also service

telescopic handler DIECI
  • mobile platforms, 
  • gantries,
  • cranes,
  • aerial work platforms and scissor lifts,
  • cranes. 

Experienced specialists 

It is important to us that the quality of our services is of the highest standard. We attach great importance to the qualifications of our specialists. Our professionals participate in training courses to expand their knowledge and are well versed in equipment from various manufacturers. 

We are mobile 

Do you have a problem with your device but no way to come to us? Don't worry, we offer a mobile service. We have specialised service vehicles, so we can drive to the address of your choice. Our mobile service technicians will take care of the complete repair of your device. Once the work is done, the service technician will wait until the machine is back in operation to check that everything is running smoothly. 

What do we offer?

  1. Qualified specialists.
  1. Mobile and stationary service.
  1. UTB purchase.
  1. Quality guarantees
  1. We train operators and maintainers. 

Sales 

If you are interested in purchasing, we also offer sales of handling equipment. We have a large selection of new and used equipment from various manufacturers. The point of sale is at our headquarters, but we can also bring the machine to your address. Consult us before you buy and our specialists will help you choose the equipment according to your expectations. 

telescopic handler collects sand

Our company 

We have been specialising in the service and sale of handling equipment for over a dozen years. Our company is based in Warsaw, but we operate throughout Poland. We have the necessary knowledge and equipment to carry out all repair and service work. The team of professionals in our company is trained and prepared for all kinds of faults. 

Training 

In addition to service and sales, we are involved in qualification. We offer courses and trainings for maintenance technicians and operators. Our training courses will teach you the essentials for your work. We will help you to obtain the necessary authorisations to operate machinery from the Office of Technical Inspection. 

QUESTIONS FROM STUDENTS

Yes, in addition to servicing telehandlers, we also deal with repair, maintenance and modernisation, among other things.

Yes, we own mobile service transports.

Yes, in addition to service we also offer sales.

[post_title] => Telehandler service [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => service-telescopic-loaders [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:39:01 [post_modified_gmt] => 2023-03-22 14:39:01 [post_content_filtered] =>. [post_parent] => 2842 [guid] => https://oso.edu.pl/?page_id=2701 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[36] => WP_Post Object ( [ID] => 3217 [post_author] => 9 [post_date] => 2023-09-04 13:19:59 [post_date_gmt] => 2023-09-04 11:19:59 [post_content] =>

The GWO Organisation was founded by leading companies that collectively hold almost 90% share of the global wind power market, such as Siemens Gamesa, Vestas, GE and Innogy. The aim of the GWO Organisation is to develop training standards that effectively identify potential hazards associated with working in this field. Uniform standards ensure a high level of safety both during the performance of professional duties and on construction sites. GWO certificates are recognised by employers all over the world as a guarantee of protection in the workplace.

Five-module GWO Basic Safety Training 

The mandatory training that anyone working on wind turbines should undergo is the course GWO Basic Safety Training (BST). Depending on where you work, there are two options to choose from: 

Training GWO Basic Safety Training Onshore consisting of 4 modules, is a mandatory training course for onshore wind turbine operators. 

  • Working at Height 
  • Fire Awareness 
  • Manual Handling 
  • First Aid 

Training GWO Basic Safety Training Offshore consisting of The 5 modules are mandatory training for offshore wind turbine operators. 

  • Working at Height 
  • Fire Awareness 
  • Manual Handling 
  •  First Aid 
  •  Sea Survival 

Participation in these training courses ensures that you are fully prepared to carry out your professional duties. During the course, the participant acquires the skills to respond to emergency and unpredictable situations, including taking part in training in first aid, handling manual handling, dealing with possible fires in the turbine, maintaining safety rules when working at great heights and maritime survival skills. 

GWO Sea Survival Training 

To enrich your knowledge, we also recommend attending a training course Sea Survival. This module meets the latest standards GWO Basic Safety Training. The training is divided into practical and theoretical parts. It includes individual rescue techniques, learning to recognise different types of alarms and diagnosing hypothermia and the risk of secondary drowning. The practical part of the training takes place in a warm pool, where participants have the opportunity to simulate the transition from a crew transfer vessel (CTV) to a rescue ladder. 

GWO Basic Technical Training (BTT) course 

Technical training GWO Basic Technical Training (BTT) has been created for people who do not have a technical background or who want to systematise their existing knowledge in the context of the wind turbine environment. 

The construction, installation and servicing of wind turbines requires technicians to have basic technical knowledge, which is provided by training GWO Basic Technical Training (BTT). Its aim is to introduce the specific environment found in a wind turbine and the technician's scope of work. The course explains the safety rules for electrical, mechanical and installation work, as well as the ability to operate hydraulic power tools.  

As part of the comprehensive course GWO FULL BTT The participant receives 3 key modules: electrical, hydraulic and mechanical, as well as an installation package that includes two modules: mechanical and installation. Completion of this BTT training paves the way for job opportunities in the wind energy industry both onshore and offshore. 

Important! Some companies may require additional certifications or internal competence standards. GWO BST certificates are valid for 2 years, after which it is recommended to complete the knowledge through the GWO BST Ref course. 

Teaching venue  

We provide training at various locations, including Warsaw and our regional branches throughout the country. We also offer training at the client's premises, including travel to the client.  

All information regarding open courses is available on our website. If you are interested in closed training, please contact us - our centre will prepare a personalised offer for you. 

If you need more information, we are ready to answer all your questions about our courses. Feel free to contact us by phone or email, or visit our Centre, where we will be happy to present our offer, help you clear up any doubts and prepare a training quote. 

Welcome to the CSO Operator Training Centre for training courses GWO - Warsaw and all over Poland! 

[post_title] => GWO certified wind training courses [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => training-world-certified-gwo [to_ping] => [pinged] => [post_modified] => 2023-09-04 15:59:56 [post_modified_gmt] => 2023-09-04 13:59:56 [post_content_filtered] =>. [post_parent] => 3148 [guid] => https://oso.edu.pl/?page_id=3217 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[37] => WP_Post Object ( [ID] => 1939 [post_author] => 3 [post_date] => 2021-08-16 13:46:22 [post_date_gmt] => 2021-08-16 13:46:22 [post_content] => Basket lift (boom lift), scissor lift - material handling equipment under technical supervisionIt is a course designed for the needs of people who plan to travel abroad to work as an operator of mobile platforms. It ends with an exam, after which you receive a certificate entitling you to work on land and at sea in selected European countries. The course program has been carefully prepared by our experienced instructors and is based on the recommendations of the international organization OMHEC, as well as ISO standards: MEWP 18878. We invite you to attend our classes in Warsaw. It is also possible to complete the theoretical part remotely in the form of e-learning.

Who can take the course

The training has been designed for both those who are already working as an operator but only have Polish qualifications and those with no experience. Depending on their level of experience, trainees will learn all of the topics needed to pass the exam or just a selected part of them.The basic requirements for participants are: primary education or above, age of at least 18 years and a medical certificate/statement of no health contraindications.

Schedule

Our instructors provide participants with knowledge in the following areas:
  • Types of mobile platforms and their use
  • Construction of aerial work platforms and scissors (in international nomenclature: boom lifts, scissor lifts)
  • Safety rules for the operation of devices
  • Procedure in the event of accidents
  • Binding health and safety regulations and other regulations related to the operation of lifts
The theoretical part - a lecture is complemented by a practical part, taking place on a manoeuvring square using equipment from the Centre's base.

Exam and qualifications

At the end of the course, a final exam is organised for participants. It is conducted by accredited instructors and consists of a theoretical and a practical part. Those who pass both parts receive a special certificate in electronic form (downloadable within a few weeks of the exam).The certificate is valid for five years and entitles the holder to work on land and at sea (offshore platforms) in the OMHEC group countries of the UK, Denmark, Sweden and Norway.For more information on organisational details, please visit our frequently asked questions page or contact us by email/phone.Operators of aerial work platforms and scissor lifts (boom lifts, scissor lifts) must be licensed to work abroad [post_title] => Course on aerial work platforms and scissor lifts with certificate for working abroad [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => boom-lifts-and-scissor-lifts [to_ping] => [pinged] => [post_modified] => 2022-09-20 10:56:13 [post_modified_gmt] => 2022-09-20 10:56:13 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=1939 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[38] => WP_Post Object ( [ID] => 2452 [post_author] => 7 [post_date] => 2022-08-19 08:46:12 [post_date_gmt] => 2022-08-19 08:46:12 [post_content] =>
working in a new profession

Equipment maintenance course for people with disabilities

We invite you to our Operator Training Centre for courses in equipment maintenance for the disabled. Our qualified instructors will provide you with valuable knowledge and the classes are delivered in an interesting way. Participants are encouraged to discuss during the course. After the lecture part of the course, participants take part in practical exercises where they learn about the construction of the platforms, the safety rules applicable to their operation and learn methods of repairing the most common faults. The training consists of a theoretical and practical part and will prepare you to pass the UDT exam. 

Curriculum 

  • Health and safety regulations and first aid rules applicable when working with disability handling equipment; 
  • Breakdown of facilities for people with disabilities; 
  • List of faults that frequently occur during the operation of the equipment; 
  • Maintenance of different types of equipment for people with disabilities; 
  • Elements of the design of equipment for people with disabilities. 

Entitlements 

After completing the course and passing the exam, you will be certified to work as a maintenance technician for handling equipment in companies and establishments specialising in repairing such equipment. 

Maintenance work 

Maintenance is the work to check the correct operation and wear and tear of equipment on an ongoing basis. Depending on the complexity of the fault, maintenance of lifts for the disabled consists of replacing the faulty component of the lifting system. Maintenance thus minimises the risk of failure and ensures passenger safety. Corrective maintenance is the carrying out of repairs to the equipment after a sudden damage or failure. Preventive maintenance is carrying out inspections and making possible repairs. Typically, preventive maintenance is carried out in accordance with the manufacturer's instructions or management policy. 

Responsibilities of the conservator: 

  • Keeping a maintenance log and noting in it the service inspection 
  • Checking the operation of buttons on the control panel and call buttons 
  • Cleaning and lubrication of the running track 
  • Visual inspection of the reducer with engine 
  • Adjustment of the drive system 
  • Compliance with crane maintenance intervals 
  • Running an emergency repair service; 
  • Communicating the need for work such as repairs. 
training programme

What are platforms for people with disabilities? 

Platforms for the disabled consist of a platform and a lifting mechanism that can be equipped with a hydraulic or electric drive. The use of this type of equipment removes architectural barriers to mobility for people with disabilities. Regular maintenance will ensure that the equipment is maintained in a condition that allows it to be used safely. If we want the equipment to last a long time and be safe, we should not forget about regular maintenance. In emergency situations, we should find an alternative to the operation of our equipment. Maintenance of the mechanism should be the basis for the correct operation of the equipment. 

Types of equipment for disabled persons 

Stair platforms - in situations where a vertical lift cannot be installed for various reasons, a stair platform is installed. It is adapted for self-service by a disabled person. The running tracks are mounted to the wall or to the stair treads, while installation is possible both indoors and outdoors.  

Vertical platforms - enable people with disabilities to overcome architectural barriers due to their practicality and ease of use. Stair carriers (stairlifts) are the cheapest form of equipment for the disabled, requiring an attendant to operate them. Thanks to the possibility to disassemble the stairlift into two parts, we are able to transport it to any place without any problem.  

lifts for the disabled

Stairlifts (stair chairs) - as the name suggests, this type of device is used to transport people up and down stairs. It is suitable for disabled and elderly people who have difficulty climbing stairs on their own. The advantage of this equipment is its small size and ease of use. 

Purpose of the training 

The aim of the training is to prepare participants to become maintenance technicians of mobility equipment for people with disabilities and to pass an examination before the Office of Technical Inspection, which issues qualification certificates. 

Requirements for the candidate

  • completion of 18 years of age, 
  • at least primary education, 
  • state of health to perform the job. 

Price 

Our centre is distinguished by its favourable prices and high quality of educational services. We work with individual clients as well as companies and institutions throughout Poland. The price depends on the number of participants taking part in our training. We offer attractive discounts for organised groups. If you have any questions, please contact us by phone or via the website. 

Where can you find us? 

We have branches in many regions of Poland, and we also offer to come to the customer at the indicated address. 

facilities for the disabled
[post_title] => Disabled facilities - maintenance course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => devices-for-disabled people [to_ping] => [pinged] => [post_modified] => 2023-03-14 19:53:36 [post_modified_gmt] => 2023-03-14 18:53:36 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2452 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[39] => WP_Post Object ( [ID] => 3220 [post_author] => 9 [post_date] => 2023-09-04 13:19:55 [post_date_gmt] => 2023-09-04 11:19:55 [post_content] =>

The OSO Operator Training Centre invites you to the course (SLS) Slinger Signaller - Hook Signaller. The aim of the training course is to provide participants with knowledge and competence in safe lifting of loads during crane operations, explaining the hazards and risks associated with the profession of hook and signaller.  

Wind turbines

The training is dedicated to wind energy workers involved in lifting operations involving the manufacture, installation and maintenance of wind turbines and their components. 

The OSO training centre fully complies with GWO standards, ensuring a high level of training. The acquired theoretical and practical knowledge will enable you to successfully cope with the work of a hook and line worker or signalman in the area of wind turbines, while maintaining safety standards in accordance with the guidelines. (SLS) Slinger Signaller. 

At our centre, we offer the opportunity to gain competence and knowledge under the guidance of experts in the field. Our courses (SLS) Slinger Signaller cover the entire country - both at our headquarters in Warsaw and in our field branches, as well as in the form of open and closed training courses. Choosing to take part in a course (SLS) Slinger Signaller, you can count on attractive financial terms. 

Purpose of the training

Hook or signaller

Training (SLS) Slinger Signaller - Hook Signaller organised by the OSO Training Centre, is designed to teach technical skills in the field of load suspension and securing techniques, while maintaining the highest safety standards. Participants in the course will become familiar with the types of equipment used and the necessary personal protective equipment. The scope of the training includes the optimum angles for lifting loads and determining the centre of gravity of the load, as well as the effective signalling of lever movement. 

Programme

Training (SLS) Slinger Signaller provides participants with the necessary knowledge and skills to perform assigned tasks safely and effectively. The course includes theoretical knowledge, instructor-led presentations and practical exercises. 

At the end of the course, the participant will have acquired knowledge in: 

  • techniques for the safe use of lifting, carrying and depositing equipment; 
  • rules for signalling any movement during simple crane operations, even with limited visibility of the crane operator; 
  • the role and responsibilities of the signaller during lifting operations; 
  • visual inspection of lifting equipment before and after operations; 
  • the professional and safe handling of equipment used in lifting operations; 
  • selecting the right sling for different types of loads, taking into account their weight, centre of gravity, shape and size; 
  • performing routine lifts according to a prepared plan; 
  • proper maintenance and use of equipment; 
  • identification of defects and faults in the equipment in use; 
  • strictly follow the instructions and procedures laid down by the employer for the efficient management of lifting operations; 

The OSO Training Centre programme is designed to provide participants with sound knowledge and skills that will enable them to operate professionally in the field of lifting operations. 

The training programme was based on lift plans (Lift Plan). 

Lift Plan is a lifting plan that includes a risk assessment, definition of methods and other relevant information such as drawings, diagrams, schedules and photos. It is a document that defines the roles of everyone in the lifting operation to ensure its successful completion. This means that each person knows in advance their responsibilities and assigned tasks for the day, allowing all qualifications to be checked and ensuring that all employees have the necessary experience and qualifications to perform the required roles. 
 
The lifting plan usually includes a method statement for the task, technical information on the crane configuration and other data on the lifting operation, such as ground conditions, site access, etc. 

Lift Plan should include a risk assessment to identify all hazards and implement a plan to address them. It must necessarily include a contingency plan for the worst-case scenario.

Entitlements

We are accredited by DNV and GWO 

Training (SLS) Slinger Signaller - Hook Signaller is carried out in accordance with the current standard GWO Basic Safety Training.  

Upon completion of the course, participants receive a certificate confirming the completion of the training and the acquisition of qualifications and skills in the area of safe lifting, moving and depositing of loads. With the skills acquired, the trainee is prepared to work safely both in the wind energy sector and in other environments where lifting operations are carried out. 

Requirements

The following requirements must be met in order to work at heights: 

  • Adult 
  • At least secondary education 
  • valid certificate from an occupational physician that there are no health conditions for working at a height of more than three metres 
  • social security or accident insurance paid 
  • having a WINDA ID number 
  • completed medical questionnaire 
  • paid training fee 
  • identity card 
  • workwear (work shoes) 

The certificate is valid: indefinitely 

Maximum number of participants per group: 10-12 persons 

Price

Price of training (SLS) Slinger Signaller - Hook Signaller is determined on an individual basis. The fee depends on the number of participants attending. We offer attractive discounts for larger groups. 

Duration of training: 2 days 

[post_title] => (SLS) Slinger Signaller - Warsaw and all over Poland [post_excerpt] => [post_status] => [post_excerpt [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => sls-slinger-signaller-warsaw-and-cala-poland [to_ping] => [pinged] => [post_modified] => 2023-09-04 22:48:07 [post_modified_gmt] => 2023-09-04 20:48:07 [post_content_filtered] =>. [post_parent] => 3148 [guid] => https://oso.edu.pl/?page_id=3220 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[40] => WP_Post Object ( [ID] => 2201 [post_author] => 7 [post_date] => 2022-05-06 08:24:44 [post_date_gmt] => 2022-05-06 08:24:44 [post_content] =>
course programme

Flange fitting course

Current regulations and the requirements of the European Pressure Directive stipulate that special certification is required for the assembly of flanged joints. For this reason, the Operator Training Centre now invites all interested parties to attend a course in flange fitting.   

Who do we address our offer to? 

You can start a flange fitting course, regardless of your experience or work situation. We also provide training for organised groups, so if you want to train your employees - we can help.

Training program 

The Operators' Training Centre has developed a programme to prepare trainees to work on flanged joint assembly in accordance with EN 1591-4. The programme covers topics such as: 

Theoretical partPractical part
  • Types of flange connections
  • Types, features and functionality of seals
  • Loads applied and their loss
  • What connects the bolt extension and load to the gasket stress
  • Types of failures and faults
  • Dismantling the installation
  • Preparation of the sealing surface
  • Principles of occupational health and safety
  • Learning to assemble flange connections
  • Practical selection of seals
  • Stages of assembly and disassembly
  • Installation tightness test
  • Getting to know the selection of appropriate personal protective equipment
  • Practical exercises

Price of training 

The total cost of the training is determined individually. Please contact us by phone for details. 

The SPA in the price of the training provides: 

  • a certain number of hours of theoretical instruction 
  • a certain number of hours of practical training 
  • access to online training materials 
  • equipment needed for practical classes 
  • stationary examination 
  • certificate upon completion of the course and obtaining qualifications. 

Where do we conduct training? 

correct installation

The Operator Training Centre has training facilities throughout Poland, and we also offer travel to the customer at the address indicated.  

Records 

Enrolment is carried out by telephone; during the conversation, the student selects a group, based on the available date and the chosen location.   

What are flange connections? 

Flanged joints are the most common type of mechanical connection used in the creation of industrial installations. They are mainly used in the plumbing industry, in the creation of water pipes and sewage systems. Assembling a mechanical connection is nothing more than joining two components together using a fastener, such as a bolt.  

Each flange connection consists of several basic components: two steel flanges, a gasket and connecting elements. Flange connections have many advantages, which is why they are so popular. They contribute to the tightness of the entire installation, which can serve us for many years to come. This exceptional tightness is achieved through the use of rubber or steel gaskets. This method ensures structural rigidity, which increases protection against damage. The construction of the joint also allows the installation to be quickly dismantled in the event of failure or maintenance work.  

We use flange connections with pipes: 

  • cast iron with fittings, 
  • steel with fittings, 
  • PVC with fittings, 
  • PEHD with fittings.
employees wearing helmets

The only requirements we set for participants are: 

  • reaching the age of eighteen, 
  • basic education, 
  • no health contraindications (before starting the course, we refer the student to a medical examination). 

If you meet the above requirements, this course is for you!   

Why a course in SPA? 

OSO has been on the market for more than 15 years. Our team of instructors is made up of people with commitment. During classes, the instructors apply an individual approach to each student. OSO strives to meet the expectations of its customers, which is why we are constantly improving the range of our services and our training prices are competitive. Feel free to contact us! 

flange connections
[post_title] => FITTING OF BOARD CONNECTIONS - We train from scratch [post_excerpt] => [post_status] => [post_excerpt [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => polycollar connections [to_ping] => [pinged] => [post_modified] => 2023-03-14 19:19:08 [post_modified_gmt] => 2023-03-14 18:19:08 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2201 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[41] => WP_Post Object ( [ID] => 3225 [post_author] => 9 [post_date] => 2023-09-04 13:19:53 [post_date_gmt] => 2023-09-04 11:19:53 [post_content] =>

Sea Survival - Survival at Sea training is dedicated to those working in an offshore wind farm environment. 

The OSO Operator Training Centre invites you to the course Sea Survival - Survival at sea.  

The training programme covers topics related to safety and behaviour in the open water area between the shore and an offshore wind turbine (WTG). The course is designed to familiarise participants with the necessary knowledge and skills to operate with confidence and take effective preventive action at every stage of offshore operations - from the shore area to the offshore installation or wind turbine (WTG), and vice versa. 

Wind turbines

The OSO training centre fully complies with GWO standards, ensuring a high level of training. The theoretical and practical knowledge acquired will enable you to work effectively in off-shore conditions, maintaining safety standards, in accordance with the guidelines of the GWO Sea Survival. 

At our centre, we offer the opportunity to gain competence and knowledge under the guidance of experts in the field. Our courses GWO Sea Survival cover the entire country - both at our headquarters in Warsaw and in our field branches, as well as in the form of open and closed training courses. Choosing to take part in a course GWO Sea Survival, you can count on attractive financial terms. 

Please contact us by email or telephone for the exact location. 

Purpose of the training

Sea Survival - Survival at Sea 

The primary objective of the training course is to familiarise the trainees with a wide range of topics necessary for working in an offshore wind farm environment. The course is designed to develop correct habits for dealing with both routine and emergency situations in the context of offshore wind energy. The training, based on theory and practice, provides a comprehensive preparation for survival in the open sea (GWO SS). 

Programme

Maritime Survival Training GWO Sea Survival consists mainly of practical activities, in water conditions. The ability to swim will allow better mastery of manoeuvres on the open sea. During the training, participants will become familiar with the legal aspects of working at sea and will learn the concepts of MOB, PLB, SAR i GDMSS.  

Team at sea
Equipment at sea

The training covers hazards such as thermal shock, hypothermia and risk of waterlogging. Students will learn how to evacuate effectively in an emergency situation and learn the correct behaviour when moving between the turbine and the transport unit (CTV). The programme also includes learning how to rescue themselves and others and how to properly call for rescue assistance. 

At the end of the course, the participant will have acquired knowledge in: 

  • the organisation of the space and the applicable regulations to ensure that candidates are aware of their roles, responsibilities and rules at offshore wind farms; 
  • understanding the importance of proper dress and behaviour in an offshore wind farm environment; 
  • recognise and respond effectively to the symptoms of heat shock, hypothermia and drowning hazards resulting from exposure to marine environmental conditions; 
  • the correct and safe use of personal survival equipment (LSA) and personal protective equipment (PPE), together with a full understanding of their benefits and limitations; 
  • Global Maritime Distress and Safety Systems (GMDSS) and Search and Rescue (SAR) procedures; 
  • handling emergencies at sea; 
  • identification of hazards and risks associated with the movement and the effective application of appropriate preventive measures, in accordance with procedures and the use of available LSA equipment and PPE in a manner consistent with safety standards; 
  • safe conduct on installations, vessels and wind turbines, both in normal operation and in emergency and evacuation situations; 
  • to move safely with the equipment between the quay and the vessel, as well as between the vessel and the wind turbine; 

The course will also provide the skills to provide assistance in situations of Man Overboard (MOB). 

Entitlements

We are accredited by DNV and GWO. 

Training Sea Survival is carried out in accordance with the current standard GWO Basic Safety Training.  

Upon completion of the course, participants receive a certificate confirming that they have completed the training and have gained qualifications and skills in the area of working in an offshore wind farm environment.  

With the skills acquired, the trainee is prepared to work safely on the open sea. 

Requirements

The following requirements must be met in order to work at heights: 

  • Adult 
  • At least secondary education 
  • valid certificate from an occupational physician that there are no health conditions for working at a height of more than three metres 
  • social security or accident insurance paid 
  • having a WINDA ID number 
  • completed medical questionnaire 
  • paid training fee 
  • identity card 
  • clothing for the aquatic environment 

The certificate is valid: 24 month 

Maximum number of participants per group: 10-12 persons 

Price

Price of training Sea Survival is determined on an individual basis. The fee depends on the number of participants attending. We offer attractive discounts for larger groups. 

Duration of training: 1 day 

Teaching venue

For the exact location of the Sea survival training course, please contact us by e-mail or telephone. 

All information regarding open courses is available on our website. If you are interested in closed training, please contact us - our centre will prepare a personalised offer for you. 

If you need more information, we are ready to answer all your questions about our courses. Feel free to contact us by phone or email, or visit our Centre, where we will be happy to present our offer, help you clear up any doubts and prepare a training quote. 

Welcome to the CSO Operator Training Centre for training courses Sea Survival - Warsaw and all over Poland! 

[post_title] => Sea Survival - Warsaw and entire Poland [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => sea-survival-warszawa-i-cala-poland [to_ping] => [pinged] => [post_modified] => 2023-10-10 18:01:35 [post_modified_gmt] => 2023-10-10 16:01:35 [post_content_filtered] =>. [post_parent] => 3148 [guid] => https://oso.edu.pl/?page_id=3225 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[42] => WP_Post Object ( [ID] => 1950 [post_author] => 3 [post_date] => 2021-08-17 13:39:52 [post_date_gmt] => 2021-08-17 13:39:52 [post_content] =>  Aerial platforms are devices with a platform mounted on a truck trailer This is a training course whose programme is designed for people who want to become specialists in the operation of boom lifts. The trainees not only learn how to operate the equipment in theory and practice, but above all prepare for the state UDT exam. Training courses conclude with an examination before a commission, and passing this exam provides the necessary qualifications for work.

UDT qualifications for basket platforms

Obtaining qualifications as a result of a passed exam allows you to start working in the profession of operator. The qualification certificate is in the form of a photo card and is issued for 5 years. Increase entitlements are valid throughout Poland, and may also be honored in selected other countries. For this purpose, we recommend purchasing a training completion certificate according to ISO 18878.

What kind of work can be done with a basket lift

The so-called jacks are one of the most popular types of mobile platforms, i.e. devices designed to transport people vertically to the workplace. These devices are mounted on cars and equipped with a boom with a platform. Thanks to the attachment on a trailer, the lifts are able to move smoothly in the field. They are used for the assembly and repairs of street lighting, at construction sites and renovation of buildings, facade painting, cleaning works in green areas - cutting trees, pruning branches. The booth is a device that is in the stock of many construction, energy and even advertising companies.

Course: aerial work platforms - details

Schedule

The increase rate is divided into theoretical and practical parts. Students have the opportunity to learn the construction of various types of aerial platforms, learn about safety rules and technical supervision regulations. Later, they learn how to handle the increases individually. The scope of the material may differ from group to group, as the training is attended by people with different levels of experience.

Individual and company classes

You can learn how to use aerial work platforms during open training sessions, organized on the dates specified on our website. The locations of the courses for aerial work platforms are Warsaw, Katowice, Krakow, if necessary, it is also possible to organize courses on request for company employees. Then the instructors can go to the place indicated by the client.

What is included in the price of the training

As part of the course fee, participants receive access to materials on the training platform, the appropriate number of theoretical and practical hours (duration may vary in different groups, depending on the level of advancement), access to devices and equipment during practical classes, refreshments during breaks coffee. Each participant receives a certificate of completion of the course, the price also includes an exam before the UDT commission.

How to register

To register for a course, please contact us by phone or email and provide details of your work experience and educational background. Those wishing to do so will then receive detailed information from us about the dates, location and programme. The lift can be used for work related to the installation of lighting, construction sites and repairs [post_title] => Course on aerial work platforms [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-basket lifters [to_ping] => [pinged] => [post_modified] => 2023-04-25 19:29:11 [post_modified_gmt] => 2023-04-25 17:29:11 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=1950 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[43] => WP_Post Object ( [ID] => 2208 [post_author] => 7 [post_date] => 2022-05-09 13:28:25 [post_date_gmt] => 2022-05-09 13:28:25 [post_content] =>
warehouse work

Forklift truck operator course 

Forklift trucks are equipment used in many different industries. They can be found not only in halls or warehouses, but also have their place on farms or in the construction industry. In Poland, they qualify as equipment subject to technical supervision. Therefore, in order to operate a forklift truck, it is first necessary to acquire the relevant competences. Our company regularly organises training courses that provide the opportunity to obtain the relevant qualifications to operate forklift trucks. However, there are a few things you should know before you decide to start a course. 

What are the permission categories? 

We can divide lift trucks into the following types (categories): 

  • Powered stacker trucks and powered stacker trucks with the operator lifting with the load, 
  • Powered stacker trucks, excluding reach trucks and those where a person is lifted together with the load. 

Forklift licences are valid for between 5 and 10 years, depending on their category. The certificate for the operation of mechanical lift trucks with boom lift with the possibility of lifting the operator with load, is valid for a period of 5 years. The certification without the ability to lift the operator with load, is valid for a period of 10 years. 

https://youtu.be/Bb_1kl-Fu4s

What does the forklift training look like? 

Like the rest of the courses at OSO, the forklift truck course consists of a practical and theoretical part. The theoretical part covers the following issues: 

  • Types and design of forklift trucks, 
  • Operator activities before and after work, 
  • Operator activities during operation, 
  • Cargo carrying messages (type of cargo, maximum load, etc.), 
  • Forklift truck technical supervision, 
  • Rules for changing cylinders on gas-powered engines. 

In addition to the theoretical part, the course also includes practical training. The classes take place on machines specifically designed for training purposes. The course concludes with an examination before an examination board appointed by the Office of Technical Inspection. Passing the examination provides the trainee with a licence to drive forklift trucks in the category of his/her choice. 

What distinguishes the OSO company? 

Our company is characterised by an individual approach to each client. Our training consultants provide a first-class service. For individual customers, we can offer participation in our open forklift courses. These are organised regularly and are accessible to everyone.  

man in a helmet

Attractive prices 

For those wishing to enrol their employees, OSO offers individual price packages for group training. The amount of the discount depends, among other things, on the category of the training, the number of persons or the level of experience of the trainees.  

Staff of specialists 

Thanks to our experience in the area of training organisation, you can be sure that you or your employees will receive training of the highest quality. This is important in order for your work to run smoothly and safely. Our trainers are experienced, high-level educators. We are ready to train anyone, regardless of their forklift experience.  

Conditions of participation 

In order to participate in the forklift course conducted at OSO, the following requirements must be met: 

  • be at least 18 years old, 
  • have a minimum of primary education, 
  • no medical contraindications to work as a forklift operator. 

Anyone who meets all of the above conditions can use the offer of OSO to expand their competences with the ability to drive forklifts. 

Where are the trainings held? 

The main seat of the OSO company is located in Warsaw. We also have branches in other Polish cities, where trainings are also organized. In addition, we are able to reach customers and organize training for them in the company, if the conditions allow it. Depending on the individual needs of customers, it is also possible to conduct the theoretical part of the forklift truck course online.  

the operator controls the machine

OSO also offers a wide range of possible training dates. In addition to standard training during working hours, people who would like to broaden their professional competences can contact our consultants for weekend or evening training. These types of dates are particularly convenient for people who are studying or working full-time. Our consultants are ready to prepare an individual offer tailored to everyone's needs. 

What is included in the price of the forklift course? 

The price of the training course includes a course that includes the necessary theoretical knowledge and practice, depending on the chosen qualification. In addition to the knowledge provided, OSO also offers its trainees - as part of each training course - access to a range of facilities such as:

  • An online platform with a full range of training materials to help trainees prepare for the forklift exam; 
  • Certificate of completion of training (it is also possible to individually prepare a document with a photo, needed for work in some countries); 
  • Access to equipment needed during practical classes; 
  • Additional refreshments for those taking the forklift course (coffee, tea, biscuits); 
  • We offer assistance in arranging accommodation for company employees who will be commuting to our branches for training. 

Our company is ready to prepare an attractive offer at a competitive price to anyone who needs a course for themselves or their employees. Our consultants will prepare a satisfactory offer for you too! Feel free to contact us!

forklift trucks
[post_title] => Forklift truck course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => carts-widlowe-course [to_ping] => [pinged] => [post_modified] => 2023-03-14 16:13:54 [post_modified_gmt] => 2023-03-14 15:13:54 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2208 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[44] => WP_Post Object ( [ID] => 3232 [post_author] => 9 [post_date] => 2023-09-04 13:19:09 [post_date_gmt] => 2023-09-04 11:19:09 [post_content] =>

What is a training provider?

A GWO training provider is a school/training centre that offers GWO training.

What is GWO?

GWO (Global Wind Organisation) is a non-profit organisation set up by wind turbine manufacturers and owners such as Vestas, Siemens, Ørsted, Vattenfall, GE, Enercon etc. 

The founding aim of this organisation was to ensure safety in the industry, and in 2012 the first version of the GWO Basic Safety Training (BST) standard was released.  

This safety standard was followed in 2017 by the Basic Technical Training (BTT) standard. 

Since then, new GWO standards have been issued, such as GWO Advanced Rescue (ART) and GWO Enhanced First Aid (EFA). 

What is a GWO certificate?

There are several GWO certifications. The mandatory certificate for working in the wind turbine industry is the GWO BST (Basic Safety Training).  

Having GWO certification is essential for technicians, site managers, health and safety personnel, subcontractors, etc. Having GWO certified training is essential for all those working in the wind energy industry. 

What is GWO BST (Basic Safety Training)? 

GWO BST training (Basic Safety Training) is an introduction to the wind turbine industry. 

At the GWO BST training you will learn how to work safely in this industry. 

The GWO BST (Basic Safety Training) certificate covers five modules: 

  • GWO WAH (working at height) 
  • GWO FAW (fire awareness) 
  • GWO FA (first aid) 
  • GWO MH (manual handling of loads) 
  • GWO SS (survival at sea) 

And one module connected Working at Heights & Manual Handling 

The first four modules are required to work on land. If the person works on the open sea, all modules will be necessary

How long are GWO certificates valid? 

All GWO Safety training courses are valid for 24 months
GWO BTT (technical training) is valid indefinitely. 

What is GWO BTT?

GWO BTT Basic Technical Training is GWO's technical training.   

GWO BTT includes 3 modules: 

  • GWO Mechanical 
  • GWO Electrical 
  • GWO Hydraulic 

The training lasts 4.5 days

What is WINDA ID?

WINDA ID is a personal identifier for all GWO certificates, which can be found in the common Wind Industry Database. It provides confirmation to the employee, supervisors and anyone else who needs it that the person has valid GWO certificates. 

What is a WINDOW?

WINDOW is the Wind Turbine Industry Database. 
Upon completion of the GWO training, your score will be uploaded to the WINDA database. 
In this way, an employee, superiors or a company that is about to employ a person can search for a personal WINDA ID and find valid GWO certificates that the person has acquired after training. 

How do I register in the WINDA database? 

Registration is done by yourself using the link: https://winda.globalwindsafety.org/ 

 General guidelines: 

  • register 
  • follow the guidelines (we recommend using a private email account rather than a company email address) 
  • open your own mailbox and activate WINDA ID 

What is GWO Sea Survival?

A valid GWO Sea Survival certificate is required to work in the offshore wind turbine industry. 
This is a 1-day training course where you will learn how to work safely at sea.

Where do wind turbine technicians work?

Technicians work on land or at sea.  

The work can involve very different tasks: 

  • Installation; 
  • service and maintenance; 
  • inspection and repair of wind turbine blades; 
  • inspections; 
  • pre-assembly; 
  • electrical tasks; 
  • tasks related to mechanics; 
  • software; 
  • supervision; 

Does a worker need to be able to evacuate a wind turbine?

The worker should be able to evacuate himself and his colleague from the wind turbine. 

[post_title] => Global Wind Organization Training - Questions and Answers [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => global-wind-organization-questions-and-answers [to_ping] => [pinged] => [post_modified] => 2023-10-10 17:59:12 [post_modified_gmt] => 2023-10-10 15:59:12 [post_content_filtered] =>. [post_parent] => 3148 [guid] => https://oso.edu.pl/?page_id=3232 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[45] => WP_Post Object ( [ID] => 3235 [post_author] => 9 [post_date] => 2023-09-04 13:19:52 [post_date_gmt] => 2023-09-04 11:19:52 [post_content] =>

The Manual Handling training course is dedicated to workers performing duties at height, especially on wind turbines.

The OSO Operator Training Centre invites you to the course Manual Handling. The course is designed to familiarise trainees with the potential hazards present in the workplace, the consequences of errors during transport operations and effective methods of minimising risks.  

Wind turbines

The course will prove particularly useful for those involved in building, operating or servicing wind turbines. 

The OSO training centre fully complies with GWO standards, ensuring a high level of training. The theoretical and practical knowledge acquired will enable you to effectively apply the techniques used in manual handling work and to properly operate equipment in the wind turbine area, maintaining safety standards, in accordance with guidelines Manual Handling. 

At our centre, we offer the opportunity to gain competence and knowledge under the guidance of experts in the field. Our courses Manual Handling cover the entire country - both at our headquarters in Warsaw and in our field branches, as well as in the form of open and closed training courses. Choosing to take part in a course Manual Handling, you can count on attractive financial terms. 

Purpose of the training

Manual Handling 

The primary objective of the training Manual Handling organised by the OSO Training Centre is to prepare participants for physical work on construction sites or when servicing wind turbines. The training programme includes a discussion of the principles of correct lifting and carrying of loads of varying weights and dimensions, and familiarises course participants with techniques for evacuating injured persons from an area at risk in the vicinity of a wind turbine. 

During manual handling

Programme

Training Manual Handling includes theoretical and practical sessions to familiarise participants with manual handling techniques in a wind turbine environment. The course aims to develop correct and safe habits in the participants according to the GWO Manual Handling guidelines. 

At the end of the course, the participant will have acquired knowledge in: 

  • a conscious approach to the performance of professional duties, taking into account aspects of reasonableness, safety and in accordance with local legislation; 
  • correctly identifying potential work-related hazards that may adversely affect the musculoskeletal system; 
  • the use of safe practices and techniques when handling objects by hand, including the correct handling of the necessary equipment; 
  • recognise signs and symptoms resulting from the inappropriate use of manual handling techniques; 
  • develop problem-solving skills for manual handling in the specific environment of wind turbines; 
  • use effective techniques to minimise risks when carrying out manual handling work; 
  • practical scenario-based exercises; 
  • legal issues; 
  • basics of anatomy; 

The CSO Training Centre programme aims to provide participants with the expertise and skills to perform their duties professionally and safely in a wind turbine environment. 

Entitlements

We are accredited by DNV and GWO. 

Training Manual Handling is carried out in accordance with the current standard GWO Basic Safety Training.  

Upon completion of the course, participants receive a certificate confirming the completion of the training and the acquisition of qualifications and skills in the area of manual handling. With the skills acquired, the trainee is prepared to work safely both in the wind energy sector and in other environments where there is a risk of injury during manual handling work. 

Requirements

The following requirements must be met in order to work at heights: 

  • Adult 
  • At least secondary education 
  • valid certificate from an occupational physician that there are no health conditions for working at a height of more than three metres 
  • social security or accident insurance paid 
  • having a WINDA ID number 
  • completed medical questionnaire 
  • paid training fee 
  • identity card 
  • workwear (gloves and work boots) 

The certificate is valid: 24 months 

Maximum number of participants per group: 10-12 persons 

Price

Price of training Manual Handling is determined on an individual basis. The fee depends on the number of participants attending. We offer attractive discounts for larger groups. 

Duration of training: 1 day 

Teaching venue

We provide training at various locations, including Warsaw and our regional branches throughout the country. We also offer training at the client's premises, including travel to the client.  

All information regarding open courses is available on our website. If you are interested in closed training, please contact us - our centre will prepare a personalised offer for you. 

If you need more information, we are ready to answer all your questions about our courses. Feel free to contact us by phone or email, or visit our Centre, where we will be happy to present our offer, help you clear up any doubts and prepare a training quote. 

Welcome to the CSO Operator Training Centre for training courses (MA) Manual Handling - Warsaw and all over Poland! 

  

[post_title] => Manual Handling - Warsaw and entire Poland [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => manual-handling-warsaw-and-cala-poland [to_ping] => [pinged] => [post_modified] => 2023-10-10 18:01:27 [post_modified_gmt] => 2023-10-10 16:01:27 [post_content_filtered] =>. [post_parent] => 3148 [guid] => https://oso.edu.pl/?page_id=3235 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[46] => WP_Post Object ( [ID] => 2725 [post_author] => 6 [post_date] => 2023-03-03 17:46:46 [post_date_gmt] => 2023-03-03 16:46:46 [post_content] =>

Manitou telehandler training 

 Manitou machine at rest

Courses for telehandlers take place at our training centres located in major cities across the country or at the customer's premises. Our training courses are aimed at those wishing to obtain the necessary UDT qualifications to work as an operator and/or maintainer.  

Application of the device 

The telescopic loader with variable reach is a specialised forklift truck, mainly intended for transport work on construction sites and in agricultural work. This is due to its design and power, which gives it the ability to transport much larger objects than a basic forklift truck. The machine is used to transport, among other things: 

  • concrete elements, 
  • aggregates, 
  • timber, 
  • steel structures, 
  • and many other materials. 

Some of the best-known manufacturers include: 

  • JCB, 
  • Dieci, 
  • Merlo, 
  • Manitou
  • New Holland. 

If we want to operate such equipment, we must obtain an operator qualification certificate, issued by the UDT. 

the operator directs the equipment

Manitou telehandler 

We carry out training courses for operators as well as maintainers on telescopic handlers from Manitou, among others. They guarantee safe handling on a wide variety of surfaces. During your training, you will learn about their construction and use, and during practical exercises you will learn how to operate them. 

What does the course offer? 

Our course is designed to prepare you for working with a telehandler in terms of theoretical and practical knowledge. We will prepare you in such a way that you will be ready to pass the UDT exam without any problems. During our course, we will train you to become an operator or a maintainer. Those with maintenance qualifications can undertake repair, modernisation and maintenance work on this equipment.  

UDT qualifications 

A trainee wishing to obtain the necessary authorisations to operate telescopic handlers must pass the UDT exam. Our training prepares you to successfully pass the state examination before a commission appointed by the Office of Technical Inspection. If you successfully pass the test, you will receive a badge confirming your qualifications within approximately 2 weeks. The qualifications you receive are valid for 5 years, after which time you must take the exam again. 

Who can start the course?  

The following are eligible for training on telehandlers: 

telescopic loader with Manitou bucket
  • persons over the age of 18, 
  • persons with at least primary education, 
  • persons who do not have medical contraindications for this type of work. 

Our other training courses 

In addition to providing courses in telehandlers, we also teach the operation of other UDT equipment such as: 

  • forklifts, 
  • mobile platforms, 
  • HDS cranes, 
  • cranes. 

Service  

We also provide service for UDT equipment. The service work is carried out by our excellent professionals, who will carefully take care of carrying out repairs, upgrades, maintenance and many other necessary service tasks.  

QUESTIONS FROM STUDENTS

Telehandler services are used in agriculture, construction and even mining.

The telehandler focuses on transporting concrete elements, aggregates, steel structures, timber and many other materials.

[post_title] => Manitou telehandler course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-on-telescopic-loaders-manitou [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:39:53 [post_modified_gmt] => 2023-03-22 14:39:53 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2725 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[47] => WP_Post Object ( [ID] => 2218 [post_author] => 7 [post_date] => 2022-05-09 14:30:30 [post_date_gmt] => 2022-05-09 14:30:30 [post_content] =>
company employees

Learn to operate compressors

Sign up for a course and become a compressor operator! An air compressor is nothing more than a device designed to obtain high gas pressure and to force the flow of gas. Compressors are used in both industrial and domestic settings. A compressor gives off a lot of heat during operation, so it is essential for it to have a cooling system. Sign up for the training provided at OSO and you will learn how to ensure high reliability and efficiency of your compressed air system and how to deal with the risk of failure. Our Operator Training Centre has air compressor training on offer.  

Among OSO's training proposals, you can also find other courses for forklift operators, telescopic handlers or mobile platforms, among others. We have enjoyed the trust of our customers for many years. We conduct our courses with due care in order to ensure the highest possible quality. You will find effective, professional compressor training programmes with us. We are able to adapt the training programme to suit your needs. We provide specialist training staff, attractive classes and favourable prices.  

Each participant will be introduced to topics such as:  

  • compressed air systems, 
  • operation of squeegees and blowers, 
  • operating principles, 
  • operation of compressors, compressors. 

In addition, each participant will become familiar with the legal regulations governing the operation of compressed air equipment and systems, as well as the classification and construction of different types of compressed air systems.  

man in a helmet

The following issues will also be addressed: 

  • health, safety and fire protection regulations, 
  • compressor capacity control, 
  • fixed and transportable pressure vessels, 
  • compressor commissioning and design. 

Acquired competences

  • Working with portable compressors of various types and types. 
  • Actively participate in the inspection and repair of mobile compressors. 
  • Controlling the quality of the work carried out. 
  • Organising the operation of mobile compressors in different climatic and atmospheric conditions. 
  • Adhering to the parameters in performing the activities on the job. 
  • Personal and collective protection equipment and measures used. 
  • Recognition of risk in the performance of activities on the job. 
  • Performing the activities of the job properly. 

Syllabus 

Our course consists of a theoretical and a practical part. The trainees gain knowledge of air compressor equipment. In addition, they learn how to start and stop various types of compressors. Trainees attend lectures during which they learn about OSH and fire safety regulations as well as legal acts relating to the principles of operating compressed air equipment and installations. Trainees also learn about the specific requirements for pressure vessels and UDT regulations. 

Entitlements 

The compressor course concludes with an examination before the UDT commission. Passing the examination guarantees the certification, which is valid for 5 years. After the expiry of the validity period, there is the possibility of renewing the licence. 

Requirements for participants 

  • at least 18 years of age. 
  • no medical contraindications, 
  • minimum primary education. 

Types of compressors

  • Reciprocating compressors - the most common device for increasing the pressure of a gas, usually air. These devices can be single-stage or two-stage. With this design, a much higher tank pressure can be achieved; 
  • Screw compressors - the operating principle is to pump air by reducing the space between the rotating impellers (screws); 
  • Centrifugal compressor - Air is drawn into the centre of a rotating rotor with radial vanes and is pushed out by centrifugal forces. Before the air is led to the centre of the rotor of the next compressor stage, it passes through a diffuser, where the kinetic energy is converted into pressure. 
working device

Purpose of the course 

The aim of the course is for the participants to acquire qualifications allowing for the correct and safe operation of mobile compressors and to obtain knowledge in the field of air compressing devices. In addition, we prepare for the exam, after which you can obtain the required qualification certificates. 

Price 

Prices are set individually, depending on the number of participants and the date of the training. We have attractive discounts for organised groups! Please see our offer on the website or contact us by telephone. 

Where to find us 

In addition to our headquarters in Warsaw, we can be found in major cities throughout Poland. In the case of organised groups, we travel to our clients. We invite you to check the locations of the OSO branches on our website. 

SEP G-2 compressor course
[post_title] => Compressor maintenance course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => compressors [to_ping] => [pinged] => [post_modified] => 2023-03-14 15:04:38 [post_modified_gmt] => 2023-03-14 14:04:38 [post_content_filtered] =>. [post_parent] => 1550 [guid] => https://oso.edu.pl/?page_id=2218 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[48] => WP_Post Object ( [ID] => 3243 [post_author] => 9 [post_date] => 2023-09-04 13:19:47 [post_date_gmt] => 2023-09-04 11:19:47 [post_content] =>

The (FA) First Aid - GWO First Aid Course is dedicated to employees working in the wind turbine sector.

The OSO Operator Training Centre invites you to the course GWO First Aid (GWO First Aid Course). The priority aim of the training is to train course participants in comprehensive theoretical knowledge and practical skills in the area of providing safe and effective first aid, with an emphasis on aspects specific to wind turbines.  

The OSO training centre fully complies with GWO standards, ensuring a high level of training. The theoretical and practical knowledge acquired will enable you to effectively provide first aid in the area of wind turbines, maintaining safety principles, in accordance with GWO First Aid guidelines. 

At our centre, we offer the opportunity to gain competence and knowledge under the guidance of experts in the field. Our courses GWO First Aid cover the entire country - both at our headquarters in Warsaw and in our field branches, as well as in the form of open and closed training courses. Choosing to take part in a course GWO First Aid, you can count on attractive financial terms. 

Purpose of the training

First aid

GWO First Aid - GWO first aid course 

The GWO Medical First Aid training course is dedicated to employees working in the wind energy sector. The aim of the training is to provide participants with the necessary skills in the area of providing medical support in emergency situations occurring on offshore platforms and wind farms. At the end of the training, participants should be competent to respond efficiently in life or health-threatening situations, be able to provide first aid, and be proficient in the use of specialised medical equipment and first aid kits. 

Programme

First Aid Training GWO First Aid is a regular part of the Basic Safety Training package. The training serves to familiarise participants with the legal aspects involved in first aid. Course participants gain knowledge in the basics of human anatomy, first aid, the use of the AED defibrillator and procedures for action during accidents. Students have the opportunity to apply the skills they have learnt in practice, during a realistic incident simulation.  

Completion of the course allows participants to become competent to work at height. The training programme provides wind turbine technicians with the highest level of safety, which is particularly important given the location of wind turbines in areas remote from emergency services. 

At the training GWO First Aid (GWO First Aid Course) participants will gain the necessary knowledge and skills in: 

  • Safe first aid, taking into account local legislation and guidelines from the European Resuscitation Council and the American Cardiovascular Society; 
  • Recognise symptoms and respond appropriately to serious injury or sudden illness; 
  • Emergency action sequences in a wind turbine environment; 
  • Correct use of first aid equipment in accordance with the C-A-B-C-D-E basic examination protocol; 
  • Effective use of an automated external defibrillator (AED); 
  • Procedure for dealing with a fracture, head injury or poisoning; 
  • Procedure for dealing with cuts, burns, electrocution, shock or heat stroke; 
  • Accurately perform follow-up examinations during first aid; 
  • Professional use of first aid equipment. The experience is based on practice scenarios; 
  • First aid management for people with chronic diseases 
  • Handling of medical equipment such as stretchers, orthopaedic collars and orthopaedic cuffs; 

Entitlements

We are accredited by DNV and GWO. 

Training GWO First Aid is carried out in accordance with the current standard GWO Basic Safety Training.  

Upon completion of the course, participants receive a certificate of completion. Course completion certificate GWO Medical First Aid is a document confirming that the trainee has acquired the necessary knowledge in first aid and the management of life-threatening situations. 

Requirements

The following requirements must be met in order to work at heights: 

  • Adult 
  • At least secondary education 
  • valid certificate from an occupational physician that there are no health conditions for working at a height of more than three metres 
  • social security or accident insurance paid 
  • having a WINDA ID number 
  • completed medical questionnaire 
  • paid training fee 
  • identity card 

The certificate is valid: 24 months 

Maximum number of participants per group: 10-12 persons 

Price

Price of training GWO First Aid is determined on an individual basis. The fee depends on the number of participants attending. We offer attractive discounts for larger groups. 

Duration of training: 2 days 

Teaching venue

We provide training at various locations, including Warsaw and our regional branches throughout the country. We also offer training at the client's premises, including travel to the client.  

All information regarding open courses is available on our website. If you are interested in closed training, please contact us - our centre will prepare a personalised offer for you. 

If you need more information, we are ready to answer all your questions about our courses. Feel free to contact us by phone or email, or visit our Centre, where we will be happy to present our offer, help you clear up any doubts and prepare a training quote. 

Welcome to the CSO Operator Training Centre for training courses GWO First Aid - Warsaw and all over Poland! 

[post_title] => GWO First Aid - Warsaw and all over Poland [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => gwo-first-aid-warszawa-i-cala-poland [to_ping] => [pinged] => [post_modified] => 2023-10-10 17:59:35 [post_modified_gmt] => 2023-10-10 15:59:35 [post_content_filtered] =>. [post_parent] => 3148 [guid] => https://oso.edu.pl/?page_id=3243 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[49] => WP_Post Object ( [ID] => 1966 [post_author] => 3 [post_date] => 2021-08-18 09:02:47 [post_date_gmt] => 2021-08-18 09:02:47 [post_content] => Hanging mobile platforms are mainly used for outdoor worksClasses for future operators of suspended mobile platforms were created in accordance with the UDT examination requirements. This means that the content provided during the training corresponds to what is required of the candidates during the qualification checking process. Thanks to this, we can boast a high pass rate among our students. We also focus on the best possible preparation for the profession of operator, focusing on work safety, practical learning and a friendly form of transferring theoretical knowledge.

What are hanging mobile platforms

A suspended mobile platform can successfully replace scaffolding on a construction or renovation site. They are devices that are either permanently installed (as so-called permanent access units - BMUs) or temporarily installed for the duration of the work. A typical platform consists of a working platform, ropes attached to girders placed on the roof, as well as a central control system, safety components and a safety rope. Different models can vary primarily in the size and lifting capacity of the platform for transporting workers, materials and tools.Examples of use:
  • Installation works on the facade
  • Washing windows, sandblasting external walls
  • Repairs, inspections of devices outside buildings: air conditioning, ventilation, lighting
  • Works on buildings and structures such as chimneys, masts, viaducts and bridges
  • Repairs, maintenance, inspections on ships, ships, offshore drilling platforms

Hanging mobile platforms operator course

These are classes that combine theory and practice. Students learn the topics required for the state exam and then practice the skills they have acquired on the manoeuvring ground. This not only effectively prepares them for the UDT qualification check. The training also provides the foundations necessary for later work as an operator. Our instructors attach great importance to issues such as proper preparation for work, safe operation and the ability to deal with breakdowns or accidents.Course outline:
  • Overview of the types and construction of hanging platforms
  • Preparing the operator for work - required activities
  • Safety rules for the operation of devices
  • Regulations applicable to devices covered by technical inspection
  • Conducting tests and tests of stability and strength

[video class="" mp4="https://oso.edu.pl/wp-content/uploads/2023/03/rusztowania-OSO.EDU_.PL-OSO-2.mp4" poster="https://oso.edu.pl/wp-content/uploads/2023/03/okladka-podnosnik-OSO.jpg"][/video].

The form of the course

The theoretical part of the course takes the form of lectures. Participants are assigned to groups so that their experience and skills are similar. This allows the instructors to adapt the knowledge imparted to their needs. Depending on the group, the duration of the training is between 8 and 20-35 hours.For those who are unable to attend a classroom training course, we offer the possibility to complete the theoretical part online.The theoretical part is complemented by a practical part. The trainees make individual appointments for the exercises, during which they learn how to operate the equipment, prepare it for work, use personal protective equipment and behave safely at work.

Place of classes

We offer our clients several locations for training courses on operating suspended mobile platforms with the UDT exam: Warsaw, Kraków, Katowice. We also organize closed training for companies. Our instructors can go to the place indicated by the company client.

Available dates

Classes usually start once or twice a month. The current dates can be found on our website www.platformaedukacji.pl.There is also information on courses for other equipment: self-propelled mobile lifts (high lifts), free-propelled mobile lifts (scissor lifts) and others to consider when gaining a new professional qualification.

Records

In the case of mobile platforms, you can register for the course via the website www.platformaedukacji.plas well as by phone or e-mail. During registration, we conduct an interview with the client, in which we determine the level of his qualifications and thanks to this, we can offer him participation in the appropriate group. At that time, we also provide other information about trainings for mobile platforms: prices, examinations, etc.

UDT exam and qualifications

Qualifications for hanging mobile platforms are obtained by passing an exam before the UDT commission (Warsaw, Kraków, Katowice or another branch). Our Center acts as an intermediary in the organization of the exam, enrolling students and arranging a date with the Office. The exam is conducted as a test with closed questions, followed by an interview at the device with the UDT examiner. II P category entitlements are granted for 10 years.With the help of a suspended mobile platform, you can reach hard-to-reach places on the facade of the building [post_title] => Hanging mobile platforms course - operation [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-mobile-hanging platforms [to_ping] => [pinged] => [post_modified] => 2023-03-16 01:04:48 [post_modified_gmt] => 2023-03-16 00:04:48 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=1966 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[50] => WP_Post Object ( [ID] => 2734 [post_author] => 6 [post_date] => 2023-03-21 17:25:34 [post_date_gmt] => 2023-03-21 16:25:34 [post_content] =>

OBTAIN A WELDING LICENCE

At the OSO Company we provide welding training. Our specialists will take care of your knowledge and manual skills. We have over twenty years of experience in this. We pride ourselves on our high pass rate on the Polish Welding Institute exam.  

MMA welding

MODERN WELDING METHODS  

Modern welding is based on several specialised methods. They are applied according to the type of materials, welding temperature and types of joining of components. 

  • TIG method - This is a common way of arc welding using a non-fusible electrode protected by a gas shield. Parts are joined by melting the base material with an additional material. Welding takes place only at a specific arc temperature.  
  • MAG method - In this method, welding is carried out using an electric arc. The arc is formed between a consumable electrode and the material to be welded. The welding process is shielded by a shielding gas stream. This method is versatile and is used for joining unalloyed, high-alloyed and low-alloy steels.  
  • Gas method 311 - The welding flame is produced by burning gas - acetylene. The welding process occurs by heating the parts to be welded with the flame and melting the edges of the object with the filler metal. 
  • Electrical method 111 - The main welding element is the covered electrode. The weld consists of the coating, the melted edges of the material and the electrode core. The joining of the workpieces takes place by melting the electrode with the material to be welded by means of an electric arc. The welding temperature plays a major role here. 

TRAINING - PROGRESS 

More than 20 years of training experience have enabled us to develop an optimal teaching plan. The courses are theoretical and practical, where it is the trainee who chooses the type of course: open or closed. The lecturers will impart the necessary knowledge on the construction and operation of the welding machine. A staff of specialists will show you how to use the equipment correctly. In addition, you will be introduced to health and safety standards and a first aid course. Comprehensive training will enable you to pass the Welding Institute exam. 

EXAM FROM A TO Z 

The examination process can start soon after the course. All you need to do is make an appointment for the examination.  

welder welds metal pipe

The Inspectorate of the Welding Institute in Gliwice is the nationwide examination centre for welders - it supervises the issuing of: 

  • Welder's Books.
  • TÜV SUD certifications.
  • Qualification Examination Certificates in multilingual versions. They are valid throughout the European Union for a period of 2 years. 

The course of the exam will begin with a written test with closed questions. The next stage will be the performance of a number of welding tasks supervised before a committee of the Welding Institute. A positive result will guarantee the receipt of all the certificates mentioned above. 

JOB OFFERS FOR WELDERS 

Shipyards, workshops, warehouses and mines offer jobs for welders. The versatility of the profession will allow them to find their way in many industries. In addition, specialised professionals will find employment in high-paying extreme jobs, including in severe weather conditions or at heights. 

LEARNER BACKGROUND 

The OSO company trains in accordance with the rules of the Welding Institute. These rules require the trainee or exam taker to have: 

  • at least primary education, preferably vocational, 
  • a current medical examination from an occupational physician, 
  • over 18 years of age. 

In addition to these requirements, good physical condition and developed manual skills will be an added advantage. 

FIND US 

welder at work

Our head office is in Warsaw, but we have centres in major cities across Poland. The convenience of our trainees is very important to us, which is why we have decided to launch a mobile training option. We provide training for groups and individual clients. 

LIST OF OTHER COURSES  

It is not only welding operator training that OSO offers. We have a sizeable base of machines for your use and can therefore offer you qualifications on: 

  • gantries, 
  • HDS cranes, 
  • telescopic loaders, 
  • aerial work platforms and scissor lifts, 
  • mobile platforms, 
  • mountaineering work, 
  • forklift trucks. 

Some equipment requires you to undertake a course mandated by the Office of Technical Inspection. We can offer you assistance during your preparation for the UDT exam. You will learn everything with us.  

QUESTIONS FROM STUDENTS

You will use the skills you have acquired most often in the workshop, shipyard, storage hall and mine. 

No, according to the requirements for students from the Welding Institute, you must be at least 18 years old. 

[post_title] => WELDING AUTHORIZATION - PERSONAL TRAINING [post_excerpt] => [post_status] => [post_excerpt [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => welding-permissions [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:20:24 [post_modified_gmt] => 2023-03-22 14:20:24 [post_content_filtered] =>. [post_parent] => 2104 [guid] => https://oso.edu.pl/?page_id=2734 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[51] => WP_Post Object ( [ID] => 3246 [post_author] => 9 [post_date] => 2023-09-04 13:24:13 [post_date_gmt] => 2023-09-04 11:24:13 [post_content] =>

Earn certificates from (BST) Basic Safety Training Standart for those working in wind turbine environments.

Wind turbines

Basic Safety Training Standard (BST) is the foundation training for all professionals working or planning to work on wind turbines onshore or offshore.  

BST standard  

The BST standard clearly defines the three criteria by which the participant will be assessed during the exam, these are knowledge, skills and abilities, which in turn are divided into three levels of competence: basic, intermediate and advanced. These levels are also assessed in the exam. The three levels of competence allow the employer to assess the employee's skills and place him or her in an appropriate position.  

At primary level the participant is able to repeat the knowledge as it was imparted to him, repeat the actions of the instructor and follow simple, elementary rules;  

At intermediate level the participant is able to explain his/her actions, choose the right equipment for the job, act independently and proactively, while remaining within average limits;  

At advanced level the participant fully understands the work process, can assess risks, adapts to changing working conditions and is willing to take responsibility for his/her colleague; 
 
Furthermore, the standard strictly defines the topics in which the participant should acquire knowledge and the minimum time required to fully master each specific topic. 

GWO BST training develops in participants the ability to provide support and care for themselves and others working in the Wind Power industry. The training provides knowledge and skills in first aid, working at height, manual handling, fire protection, offshore survival. 

After taking the course, the trainee will have acquired knowledge in: the basics of evacuation, life and health rescue and first aid for victims.  

GWO's basic safety training is divided into the following six modules: 

  • First Aid 

The aim of the BST first aid module is to enable participants, through theoretical and practical training, to recognise the signs and symptoms of life-threatening situations and to administer safe and effective first aid in the wind turbine industry / wind turbine environment in order to save lives and prevent further injury until the casualty is transferred to a higher level of care. 

  • Manual Handling 

The aim of this module is to reduce the risk of musculoskeletal injuries for wind technicians in the wind industry and to enable participants to perform tasks and activities in the safest possible way when working in a wind turbine environment. 
 
The instructor should be aware that this module allows first-time and refresher participants to take part in the same activities. The training should therefore include knowledge sharing by more experienced participants. 

  • Fire Awareness 

The aim of this module is to educate participants on how to prevent fires, make good judgements when assessing a fire, manage the evacuation of personnel and make sure everyone is safely evacuated, in the event of an uncontrollable fire. If the incident is deemed safe, participants should be able to successfully extinguish the first fire using basic hand-held firefighting equipment. 

  • Working at Heights 

The aim of this module is to enable participants, through theoretical and practical training, to use basic personal protective equipment, work safely at height and perform complex basic rescue operations at height in a remote wind turbine environment.  

  • Working at Heights & Manual Handling 

The aim of this module is to enable participants, through theoretical and practical training, to use basic personal protective equipment, to work safely at height and to perform complex basic rescue operations at height in a wind turbine environment. In addition, this module aims to encourage correct manual handling habits and ergonomics and enable participants to perform manual handling tasks in a safe manner.   

Note: The BST, Working at Height and Manual Handling is a combined module that includes the lessons and elements of both the BST Working at Height module and the BST Manual Handling module and is designed to be completed over two days. The combined BST Working at Height and Manual Handling module can be delivered instead of the two stand-alone modules, and if the combined course is delivered, participants will receive two training documents: one on working at height and one on manual handling. 

  • Sea Survival 

The aim of this module is, through theoretical and practical training, to provide participants with the skills to act safely and responsibly and take correct preventive action in all aspects of offshore operations, from shore to installation vessel (or wind turbine) and vice versa. This includes both normal operations and emergency situations in the offshore wind environment. 
 
In addition to complying with regulations and legal standards, the training provider must continually ensure that training materials are kept up to date and in line with industry guidelines, in particular G+: Working at Height in the Offshore Wind Industry and Safe Management of Small Service Vessels Used in the Offshore Wind Industry. 

[post_title] => Basic Safety Training Standard [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => basic-safety-training-standard [to_ping] => [pinged] => [post_modified] => 2023-10-10 17:12:51 [post_modified_gmt] => 2023-10-10 15:12:51 [post_content_filtered] =>. [post_parent] => 3148 [guid] => https://oso.edu.pl/?page_id=3246 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[52] => WP_Post Object ( [ID] => 2479 [post_author] => 6 [post_date] => 2022-09-01 07:33:34 [post_date_gmt] => 2022-09-01 07:33:34 [post_content] =>
UDT qualifications

Specialised vocational training

Fibre optics have transformed the entire technology industry, making high-speed data transmission possible. Overhead cranes allow us to move heavy goods on construction sites, in production halls or shipyards. Mast mobile platforms enable work on façades or painting walls.   

Due to the constant demand for short-circuits concerning the operation of the above-mentioned equipment and the growing demand for fibre optic cable maintenance, our Operator Training Centre (OSO) offers you specialised vocational training, after which you will gain a high level of knowledge and skills in the profession you wish to pursue. Once you have completed the courses, you can test your knowledge with an exam and obtain the necessary UDT - Office of Technical Inspection - certificate. 

What does the UDT do and what are its powers? 

UDT - the Office of Technical Inspection, is a state institution established to ensure the safety of all technical devices and installations that are subject to technical supervision. The UDT operates on the basis of legal acts, primarily the Act of 21 December 2000 on technical supervision, which states what the Office of Technical Inspection is responsible for. 

The authorisations issued by the UDT apply, among other things, to plants that modernise, manufacture, repair, and assemble technical equipment. This applies to both domestic and foreign establishments. Also, the UDT authorisations specify the qualifications of an individual employee with respect to maintenance or operation of equipment subject to technical supervision - material handling equipment (e.g. construction cranes, overhead cranes, stationary cranes, tower cranes, mobile platforms, lift trucks). 

The certificates, which are issued by the Office of Technical Inspection, confirm the employees' knowledge of the legislation and knowledge of the technical inspection conditions. 

tower cranes

UDT training

In order to obtain your UDT licence, it is important to have the necessary training. Our courses are run by qualified specialists who are always available to you. We offer a wide range of courses on the operation of materials handling equipment, such as fork-lift truck operator courses and aerial work platforms. In addition, we offer you training in repairing and maintaining UDT equipment and a course in fibre-optic welding. 

COURSES OFFERED BY THE OPERATOR TRAINING CENTRE (OSO) 
Types of Training: For Whom: Training description: 
Forklift truck operator For those undertaking work in transporting and unloading smaller goods, e.g.: in warehouses, shops or companies; Courses in lecture format. Topics: - technical supervision regulations; - safe use of platforms; - construction and instructions for use of equipment; - tests on the equipment; 
Suspended access platforms - operation E.g.: for workers on construction sites, carrying out assembly work, carrying out repairs or inspections on ships; - Types and construction of suspension platforms; - Safety when operating the equipment; - Strength tests; - Necessary preparation for work; 
For aerial work platforms and scissor lifts certified to work abroad Persons wishing to work abroad as a mobile platform operator. - types and use of aerial work platforms; - safety in handling the equipment; - construction of scissor lifts and aerial work platforms (including international nomenclature); - behaviour in the event of accidents; - health and safety regulations applicable abroad; - foreign regulations in connection with the operation of aerial work platforms. 

In addition, we offer training: 

training room
  • Mast lift courses - for operators; 
  • Operating scissor lifts - for operators; 
  • Mobile lifting platforms course; 
  • Crane training; 
  • Courses for aerial work platforms; 
  • Learning to weld fibre optics; 
  • Repairs and maintenance of UDT equipment. 

Our courses consist of lectures and practical exercises. They are conducted in such a way that you can easily pass the UDT state examination and with it, gain the necessary qualifications to practice your profession. 

Feel free to contact us and we will provide you with all the necessary information. We guarantee affordable prices, which you can be sure of - we set them individually. For organised groups - we offer discounts. We run open courses as well as closed training courses. The head office of our company is in Warsaw, but we also operate in cities such as, among others: Krakow, Bielsko-Biala and Katowice, Poznan, Gdynia or Wroclaw. In the case of a closed course, we will travel practically anywhere.  

We also encourage you to take a look at the extraordinary range of courses that our Operator Training Centre has on offer. Amongst others, we have initial and periodic courses in occupational health and safety, first aid training, as well as courses in fire safety.  

[post_title] => UDT qualification course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-right-udt [to_ping] => [pinged] => [post_modified] => 2023-05-16 16:10:47 [post_modified_gmt] => 2023-05-16 14:10:47 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2479 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[53] => WP_Post Object ( [ID] => 2995 [post_author] => 3 [post_date] => 2023-03-22 15:22:12 [post_date_gmt] => 2023-03-22 14:22:12 [post_content] => [post_title] => Services [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => services [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:22:13 [post_modified_gmt] => 2023-03-22 14:22:13 [post_content_filtered] =>. [post_parent] => 0 [guid] => https://oso.edu.pl/?page_id=2995 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[54] => WP_Post Object ( [ID] => 1973 [post_author] => 3 [post_date] => 2021-08-18 12:21:21 [post_date_gmt] => 2021-08-18 12:21:21 [post_content] => According to the regulations on technical supervision, a stationary mobile platform is a piece of handling equipment that is subject to technical supervision. Such a provision implies a number of obligations for operators, including the need to keep appropriate records, perform regular technical inspections. Above all, however, it is a requirement to hold a UDT licence to operate platforms.The stationary aerial platform operator course is a way of acquiring not only the knowledge needed for the job, but also the qualifications themselves. As part of the course, a state examination before the UDT commission is organised and the cost of taking the exam is included in the course price.

Stationary landing: construction, operation, applications

This type of platform is classed, along with suspended platforms, as category II P - according to the classification of the UDT. Unlike mobile platforms, for example, which are mobile or self-propelled, they do not have a wheeled chassis. They are positioned in one place either permanently or for long periods, so they are suitable for construction work, complex renovation work, as well as factory halls or warehouses.A typical stationary platform is equipped with a basket/platform for transporting workers, tools or materials, and a telescopic or scissor boom. The whole is placed on a stable platform. The operator controls the boom by means of an automatic control system.

[video class="" mp4="https://oso.edu.pl/wp-content/uploads/2023/03/podnosnik-OSO.EDU_.PL-OSO-1-1.mp4" poster="https://oso.edu.pl/wp-content/uploads/2023/03/okladka-podnosnik-OSO.jpg"][/video].

Stationary mobile platforms course - details

The class is designed for people who want to become qualified as operators. Completion of the course and passing the exam is sufficient to obtain the qualifications required by the UDT and adequate preparation for work. We do not require trainees to have any experience or knowledge of operation. However, experienced people who, for example, have worked as a helper operator may participate in the course - in groups for such people, the scope of the material may be reduced by unnecessary elements.The time required to gain the qualification ranges from approx. 8 hours (experienced participants) to approx. 20-35 hours (beginners).The course "Stationary mobile platforms" is as follows:
  • Theoretical classes - stationary or online: information on safety rules, technical inspection regulations, device construction, applications, operator's duties during work
  • Practical classes - learning how to use the equipment on the maneuvering yard / hall
  • UDT exam - training courses are concluded with a state exam conducted by UDT inspectors (from Warsaw or one of the branches throughout Poland). A candidate who passes the exam is awarded a licence for category II P mobile platforms: stationary and suspended.
To choose the date and place of training for mobile platforms (Warsaw, Katowice, Krakow and other large cities), go to the website of our booking system: www.platformaedukacji.pl. A place on the training course is reserved once the product has been added to the basket and payment has been made.Should you have any further questions: are you interested in other courses (for stepladders, free-running mobile platforms, etc.), would you like to organise a training course for your company's employees, please do not hesitate to contact us by phone or email. [post_title] => Stationary mobile platforms - course for operators [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => platform-mobile-stationary [to_ping] => [pinged] => [post_modified] => 2023-03-15 00:30:44 [post_modified_gmt] => 2023-03-14 23:30:44 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=1973 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[55] => WP_Post Object ( [ID] => 2741 [post_author] => 6 [post_date] => 2023-03-03 18:46:41 [post_date_gmt] => 2023-03-03 17:46:41 [post_content] =>

Flange fitter 

Flanged joints are not an easy item to handle. All it takes is a moment's inattention, a small mistake and an unpleasant situation endangering the environment can occur. 

metal pipes connected to each other

Our courses are designed to professionally prepare the future fitter for his or her job. Qualified staff will duly carry out the training of such a person. 

After successfully passing the tests at the end of the class, the future fitter will receive a certificate giving permission to perform flange joint assembly. 

Theoretical classes 

The theory lectures will cover key information such as: 

  • types of flange connections and how to install and remove them; 
  • which seals to work with, as well as how to tell them apart and what their stresses are; 
  • what to do to avoid the appearance of seals and how to prevent them,
  • what a bolt load is and what types of bolt load there are; 
  • what safety measures to take at work and how, according to these standards, to prepare for their duties. 

Practical classes

  • learning how to install flange connections, but also how to dismantle them, 
  • ways of selecting appropriate protective measures in line with basic health and safety principles, 
  • ways of distinguishing between gaskets, but also where and when to use them, 
  • tests to show how tightly, and if at all, the flange connections have failed. 

So we invite you to buy your courses with us! 

What are flange connections? 

This is nothing more than one of the unique mechanical connections used in the construction of industrial installations such as water mains and sewers. 
They consist of several components, which include two flanges made of steel, gaskets and the element that connects them together. This connecting element may be a bolt, whose task, despite appearances, is very important. If it is not tightened correctly, it may not hold the parts of the joint together, which is why it is important to have the knowledge to prevent this from happening.  

installation of flange connections

Flanged joints can be divided into one-piece, but also those that can be fitted loosely. The former can withstand a wide range of loads, as many have special reinforcement created during the pressing and casting process to strengthen them. They are somewhat more difficult to fit. The latter, on the other hand, are definitely easier to fix, but less robust. 

Where are flanged connections used and what are the types? 

We need the right pipes together with the fittings that are necessary for this type of connection. These include pipes: 

  • PEHD, 
  • PVC, 
  • cast iron, 
  • steel. 

The flange connection, on the other hand, is divided into: 

  • those used on steel pipelines and the equipment attached to them. They are very easy to recognise, as they are flat rings that are welded to a given location over its entire surface. They are referred to as welded flanges; 
  • which have two components: a ring and a flange, which must be welded in the appropriate zone on the pipe. They are very simple to fit. They are mostly used when dealing with metals such as copper or aluminium. They are called loose flanges on a welded ring; 
  • used when working with enamelled surfaces. These mount close together and are able to maintain the temperature of such material. They are called clamping collars; 
  • easy to dismantle, able to withstand very high pressure. They are used on assemblies or equipment where welding is not desired. The contact is then with threaded flanges. 
metal pipe close-up

In addition, we offer 

  • training courses for the operator and maintenance of UDT machines, including mobile platforms (aerial work platforms and scissor lifts), cranes, overhead cranes, telescopic handlers and storage stackers, 
  • health and safety training, 
  • mobile and stationary service of UDT equipment, 
  • modernisation, maintenance, 
  • the possibility of hiring a replacement machine (scissor lift or forklift), 
  • possibility to check the machine before purchase, 
  • sale of new and used equipment. 

QUESTIONS FROM STUDENTS

Flanged joints are nothing more than one of the unique mechanical connections used in the construction of industrial installations such as water and sewer lines.

Our courses are designed to professionally prepare the future fitter for his or her job. Qualified staff, will duly carry out the training of such a person.

Experienced people increase safety in the workplace.

[post_title] => Flange fitter course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-on-mounting-gear-fitters [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:37:42 [post_modified_gmt] => 2023-03-22 14:37:42 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2741 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[56] => WP_Post Object ( [ID] => 1975 [post_author] => 3 [post_date] => 2021-08-18 12:28:39 [post_date_gmt] => 2021-08-18 12:28:39 [post_content] => Operating the mast climbing work platform requires a licensePersons wishing to practise as a mast platform operator are required to hold professional qualifications. The qualifications issued by the UDT are a document confirming qualifications: the ability to operate equipment, knowledge of regulations and the principles of safe operation.Anyone wishing to gain such qualifications is invited to attend our "Mast Lift" course. The course programme takes into account the requirements of the Office of Technical Inspection and the Regulation of the Minister of Economy of 18 July 2001 on the procedure for verifying qualifications required for the operation and maintenance of technical equipment. This means that attending the classes is a good source of knowledge and skills for those wishing to take the UDT examination.Classes are held regularly in several locations throughout Poland (we organise training for mobile platforms in Warsaw, Krakow or Silesia). We also have the possibility to conduct lectures remotely, in the form of webinars.

Permissions for mast climbing work platforms

In Poland, the qualifications for operating mast platforms are checked by the Office of Technical Inspection. Its inspectors carry out an examination in the form of a test with closed questions and a practical test. A positive result from both parts of the exam is the basis for the granting of authorisations. From June 2020, entitlements are granted for both stationary and mast-mounted mobile platforms at the same time, with a validity period of 10 years. The document is in the form of a plastic card with a photograph and is valid throughout Poland, in some cases also abroad.With a mast platform licence, it is possible to work on construction sites, during repairs and also in warehouses and factories. This type of device, consisting of a work platform for moving workers vertically, placed on a mast, has many indoor and outdoor applications. It is easy to handle and transport and works well to facilitate access to storage racks, and is also helpful for façade installation work or wall painting. The reach of the mast is from a few metres to about 10 metres.

[video class="" mp4="https://oso.edu.pl/wp-content/uploads/2023/03/podnosnik-OSO.EDU_.PL-OSO-1-1.mp4" poster="https://oso.edu.pl/wp-content/uploads/2023/03/okladka-podnosnik-OSO.jpg"][/video].

Course "Mast Lifters" - details

In the case of mobile platforms, the course takes place in groups at different levels. Both beginners and those who have already worked on handling handling equipment, for example as assistant operators, can take part.Classes last from around 8 to 35 hours, depending on the experience, knowledge and training needs of the participants. If a trainee has already dealt with the operation of platforms, fewer class hours may be required.Our training courses are designed for people who:
  • They are of legal age
  • They have at least basic education
  • They have no health contraindications
The training consists of the following elements:
  • Lectures, on-site or online: information on the construction and operation of the mast platform, safety rules related to operation, operator's obligations resulting from the provisions of technical inspection, preparation for work
  • Practical exercises on the maneuvering yard / hall
  • State exam, conducted by examiners from the appropriate UDT branch: Warsaw or another. The exam takes the form of a knowledge test followed by an interview with the operator at the device.
With a view to people who would like to take the UDT exam as soon as possible, training courses are planned well in advance. This allows us to take exam dates into account so that waiting times are as short as possible.The mobile platform operator course even starts several times a month, and classes are held in various locations throughout Poland, mainly in large cities. Our timetable also includes courses for stepladders (self-propelled mobile platforms), free-propelled mobile platforms (scissor lifts) and other equipment. Registration for all training courses takes place at www.platformaedukacji.pl. There you will also find the current dates and locations of the classes.If you are interested in organising a closed training course for your company, please do not hesitate to contact us. We are experienced in providing training courses with examinations for the licensing of aerial work platforms and other equipment, and we are flexible in terms of dates and location of classes.The mast mobile lift is placed on a chassis with wheels, it has a mast and a working platform [post_title] => Mast Lift Course - for operators [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-mobile-mast platforms [to_ping] => [pinged] => [post_modified] => 2023-03-15 00:39:30 [post_modified_gmt] => 2023-03-14 23:39:30 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=1975 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[57] => WP_Post Object ( [ID] => 1722 [post_author] => 3 [post_date] => 2020-01-05 23:08:29 [post_date_gmt] => 2020-01-05 23:08:29 [post_content] => The General Data Protection Regulation (GDPR, RODO) is a European Union regulation of 27 April 2016, which comes into force on 25 May 2018. Its main objective is to harmonise data protection rules and the free movement of personal data across EU countries.The EU RODO Regulation introduces a number of changes, including those relating to data administration, storage, deletion, portability, immediate notification in the event of a data hacking attack. The RODO regulation also regulates the conditions for imposing administrative penalties on non-compliant entities - up to €20 million.To meet the needs of data controllers, our CSO Operator Training Centre invites you to a data protection training course. This is a comprehensive theoretical and practical class that addresses all issues related to RODO.The program includes information such as:
  • legal basis for the processing of personal data
  • basic definitions in the field of personal data protection
  • who is the data administrator and what are the administrator's tasks
  • who is the data protection officer status and what are his tasks
  • who is the entity processing personal data
  • general conditions for the imposition of administrative fines
  • recording processing activities
  • organizational structure of personal data protection
  • conditions for expressing consent to the processing of personal data
  • rules regarding the processing of personal data
  • the right of access by the data subject
  • processing of special categories of personal data
Data protection training is conducted in the city of Warsaw. The price of the training also includes catering and a lunch break.During our classes, we use modern, activating teaching methods, which allow us to transfer knowledge to participants in an accessible and effective manner.If you are also interested in RODO training, we encourage you to contact us to arrange details.We warmly invite you to choose our educational offer at the OSO Operator Training Centre! [post_title] => Data protection post_excerpt] => [post_excerpt [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => personal-data-protection [to_ping] => [pinged] => [post_modified] => 2020-01-05 23:08:29 [post_modified_gmt] => 2020-01-05 23:08:29 [post_content_filtered] =>. [post_parent] => 22 [guid] => https://oso.edu.pl/?page_id=1722 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[58] => WP_Post Object ( [ID] => 2749 [post_author] => 6 [post_date] => 2023-03-21 17:27:55 [post_date_gmt] => 2023-03-21 16:27:55 [post_content] =>

Warehouse stacker crane operator training 

Our OSO training centre offers training to prepare you for the Office of Technical Inspection exam and to work independently as a warehouse stacker crane operator. 

warehouse stacker cranes on the shop floor

With more and more people seeking employment in warehouses, competition in the job market is fierce. In order to increase your chances of finding a job or getting a raise, it makes sense to increase your qualifications and credentials. 

Purpose of the training 

Preparation for the examination of the Office of Technical Inspection as a warehouse stacker crane operator. A qualification certificate will be issued upon passing the exam. 

Scope of the training 

  • legal regulations and standards for the operation of equipment, 
  • the types of equipment that fall within the scope of the entitlement, 
  • construction of storage stacker cranes, 
  • organisation and area of activity of technical supervision, 
  • the device's stability date, 
  • design and operation of the device mechanisms, 
  • the rules to be followed in the event of an accident or mishap, 
  • organisation of own work, 
  • the stacker operator's duties to be carried out before, during and after work,  
  • categorisation and typology of warehouse stacker cranes, 
  • operation of brakes and safety devices, 
  • manoeuvring of general-purpose equipment mechanisms, 
  • manoeuvring the mechanisms of special-purpose equipment, 
  • health and safety rules for the operation of warehouse stacker cranes, 
  • rules on working in exceptional circumstances, 
  • hydraulic, electrical and pneumatic equipment. 

Warehouse stacker cranes - characteristics 

stacker crane in stock

Warehouse cranes are classified as UTBs, or handling equipment. In order to operate them, it is necessary to have a certificate from the Office of Technical Inspection confirming that you are qualified. 

Stacker cranes are machines designed to move and stack loads that are stored in warehouses. We can distinguish between the following types of warehouse stacker cranes: 

  • single-column (column), 
  • two-column (frame), 
  • suspended, 
  • cranes (mobile). 

They can also be divided on the basis of steerability: 

  • automatically controlled, 
  • semi-automatically controlled, 
  • manually controlled. 

Stacker cranes can have different picking and feeding mechanisms. There may be a conveyor, gripper or forks fitted to the unit. 

The course price includes 

  • theoretical classes, 
  • training materials, 
  • practical activities, i.e. learning to operate the device, 
  • assistance in arranging an examination date at the UDT. 

Requirements for candidates 

warehouse stacker crane operator
  • at least 18 years of age, 
  • minimum primary/high school education, 
  • a certificate from an occupational doctor to the effect that there is no obstacle to performing the duties of a warehouse stacker crane operator. 

Maintenance course 

We also provide training in the maintenance of storage stacker cranes. We invite anyone whose goal is to become a maintainer of this equipment to take the course. Our qualified instructors will do their best to prepare you to pass the exam in the best possible way. 

QUESTIONS FROM STUDENTS

You can work on the warehouse floor as a warehouse stacker crane operator.

Yes. Our training company offers a course to become a maintainer of this equipment.

The syllabus for the course is very broad and you can learn, among other things, how to properly operate the warehouse stacker cranes, their structure and the mechanisms that operate in them, the responsibilities of the operator and the rules to ensure safety during work. 

There are three basic conditions: The age of majority, completion of at least primary or lower secondary school and a state of good health to practice the profession. 

[post_title] => UDT CURSE FOR STORAGE LOADER OPERATIONS [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-maintaining-maintenance-courses [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:40:40 [post_modified_gmt] => 2023-03-22 14:40:40 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2749 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[59] => WP_Post Object ( [ID] => 1986 [post_author] => 3 [post_date] => 2021-08-18 13:25:35 [post_date_gmt] => 2021-08-18 13:25:35 [post_content] => Scissor lifts - devices covered by UDT technical supervision, requiring authorizationThe scissor lift course comprehensively prepares you to work as an operator. First of all, it makes it easier to pass the UDT exam necessary to obtain qualifications. The curriculum is flexible and has been designed both for people with no experience and for those who want to complete their qualifications. Provides theoretical and practical preparation.

Training courses preparing for UDT exams

The authorizations granted by the Office of Technical Inspection (UDT) enable the performance of works on all types of platforms covered by technical supervision. In the case of mobile platforms (including scissor lifts), these qualifications are granted for 5 years.
The scissor lifts course program has been designed with the exam preparation in mind. The theoretical and practical training (UDT conducts the exam in this form) includes, among others:
  • Information on machine construction, safe operation, and the use of the manual
  • Principles of operation
  • Technical inspection of devices
  • Practical exercises in the use of scissor lifts
The details of the stepladder course (price, number of hours, place of training) are determined through individual contact with the client. The centre organises open training courses, which can be attended by anyone interested, and closed training courses, in which case only employees employed by the company in question take part.People with no previous experience of operating scissor lifts can also take part in the classes. In their case, the duration of the course is longer, but they receive all the knowledge necessary to pass the UDT exam. Those with experience can take a shortened version of the training course to complete the necessary information. Online classes are also available for such individuals.

Lift licences - employment opportunities

By completing the training and gaining the UDT qualification, you can quickly find employment in the profession. Lift operators are sought after in, among other places:
  • Construction and renovation companies
  • Power plants - in teams dealing with the repair and replacement of lighting
  • Companies dealing with the conservation of monuments, cleaning glass surfaces in buildings
  • Plants with their own high-bay warehouses and factory halls
  • Advertising companies - in works related to the installation of banners and billboards, as well as in the construction of stands at fairs
By investing in your own equipment, you can also provide lift rental services and do your own work.Operation of scissor lifts requires a license confirmed by the Office of Technical Inspection [post_title] => Operating scissor lifts - operator course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => handle-rising-noses [to_ping] => [pinged] => [post_modified] => 2022-09-20 10:56:03 [post_modified_gmt] => 2022-09-20 10:56:03 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=1986 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[60] => WP_Post Object ( [ID] => 2755 [post_author] => 6 [post_date] => 2023-03-21 17:35:22 [post_date_gmt] => 2023-03-21 16:35:22 [post_content] =>

Learn to operate a backhoe loader 

backhoe loader on site

Our training company offers various specialised courses for the UDT and IMBiGS machine operator. Future backhoe loader operators are trained by our experienced and qualified instructors, who impart knowledge in an understandable and innovative way. We offer courses that provide theoretical and practical knowledge. We want to show you various techniques and manoeuvres that make your job as a machine operator easier.  

Our objective

Our aim is to prepare the trainees for the operator's job so that the work does not pose any problems for them. The course is conducted with current regulations and standards.  

Requirements to be able to join the course  

  • at least 18 years of age,   
  • at least primary/high school education,  
  • a medical certificate indicating that there are no contraindications to exercising the profession.  

Training offer 

We want to prepare our trainees to successfully pass the final examination before the IMBiGS commission. The course can be completed either in weekend or daytime mode, depending on the needs of our trainees. During the training course, we want to provide you with theoretical knowledge and the application of machines in practice.   

The classes where we will teach your theoretical knowledge cover a range of topics:  

  • health and safety at work,   
  • The use and operation of backhoe loaders,   
  • general construction,   
  • the various mechanisms and systems of backhoe loaders, 
  • tasks and responsibilities of the operator, 
  • legislation and technical supervision, 
  • specialised activities.  

The practical part is achieved through exercises with machines, where students translate their theoretical knowledge into practical skills. Practical classes include exercises with an instructor.  

backhoe loader at work

The course is completed by us issuing a certificate of completion of the training course and then taking an examination before a board appointed by IMBiGS.   

What does the examination look like?   

The state exam is made up of two parts.  

The examination begins with a theoretical part, which involves the candidate answering questions on the examination sheet. The participant then moves on to the practical part, in which they must apply their skills in front of a jury. This part of the exam tests the fluency of the activity and the ability to operate the machine in a way that is safe and does not endanger the health and life of the worker. 

Successful completion of the examination results in a qualification certificate and the issue of a working machinery operator's book, which includes the entry "backhoe loaders, all, class three". The qualifications are valid indefinitely. 

Backhoe loaders - characteristics and applications 

The backhoe loader is one of the most popular construction machines. It is mainly used for preparing land for the construction of pavements and cycle paths, cleaning work or carrying out drainage work. The machine is also often used for farm work.  

We have the option of attaching various equipment to the unit. In addition, the unit has hydraulic equipment fitted to allow other tasks to be carried out in addition to digging or lifting.  

The most popular backhoe loader manufacturers are JCB, NEW HOLLAND, CASE, Terex, Kubota and Caterpillar. 

backhoe loader collects sand

In Poland, machines such as backhoe loaders may only be operated by people who have completed a machine operator training course and a qualification certificate issued by the IMBiGS. It is possible to obtain a qualification certificate by taking a preparatory course.  

Other IMBiGS courses for operator and maintenance qualifications

  • bulldozers,  
  • excavators, 
  • road rollers,  
  • multi-purpose equipment carriers.  

In addition, we offer: 

  • fire and health and safety training, 
  • UDT operator and maintenance courses, including mobile platforms, telehandlers, cranes, stackers and forklift, 
  • maintenance, audits, modernisation of equipment, 
  • mobile and stationary UDT machine service, 
  • sale of new and used equipment. 

You are welcome!  

QUESTIONS FROM STUDENTS

Yes. The backhoe loader operator course concludes with a compulsory examination before an IMBiGS commission. If the participant does not take it, he or she will not receive the required qualifications.

Once certified by IMBiGS, you can operate equipment from the most well-known manufacturers of backhoe loaders, including: JCB, NEW HOLLAND, CASE, Terex, Kubota and Caterpillar.

Backhoe loaders are often used on farms. They are used to prepare land for the construction of footpaths and cycle paths, clean-up work or to carry out drainage work.

[post_title] => Specialized UDT course for backhoe loader operator [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-on-operator-excavator-loader [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:41:20 [post_modified_gmt] => 2023-03-22 14:41:20 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2755 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[61] => WP_Post Object ( [ID] => 2503 [post_author] => 6 [post_date] => 2022-09-06 07:32:05 [post_date_gmt] => 2022-09-06 07:32:05 [post_content] =>

Fire protection is a priority for your business

Shared security is very important. Most people do not realise that basic education on the subject is essential for proper functioning. Your business, along with your employees and all your belongings, will not be adequately protected if you do not take an interest in proper fire prevention. Many risks need to be dealt with properly, and to do this you need expertise that will help you to mitigate or remove the effects of bad events.  

Use of a powder extinguisher by the trainee

It must also be taken into account that the training provided in fire safety is often only theoretical and there is no opportunity to test a fire extinguisher or other methods to bring a fire under control. This can result in not having enough time to react quickly and smoothly in an emergency situation. As a result, the damage will be greater and panic will set in. At such moments, every second counts.  

Our Operator Training Centre (OSO) provides the highest level of service in both theory and practice. With us, you can be sure that we will prepare you and your employees to respond in the best possible way under difficult conditions. We will tailor our offerings to suit your particular workplace. 

How do you protect your home or flat from fire? 

  • Purchase of a fire extinguisher, 
  • Ventilation control, 
  • Taking care of the gas and electrical installation, 
  • Installation of a chad/smoke/gas detector. 

PPO class topics.

  • Types of fires and their extinguishing; 
  • Operation, labelling, types and standards of fire extinguishers; 
  • Should you open windows when something is on fire? 
  • Extinguishing methods; 
  • Using a hydrant; 
  • Spray system; 
  • Where to place fire equipment; 
  • Emergency procedures; 
  • How to evacuate people safely; 
  • First aid. 

What will you gain from the practical training? 

After a thorough discussion and assistance from the instructor, you will get the opportunity to test all types of fire extinguishers, so you will learn how to activate the device and assess its effectiveness. You will then see how fire blankets, which are an alternative to fire extinguishers, work. The exercises take place in a safe environment. You will see how an indoor hydrant works and learn the appropriate extinguishing techniques. You will enter a smoke chamber that resembles conditions during real fires. You will extricate a mannequin from it. You will acquire the skills to deal with a burning gas cylinder. You will learn how a pressure vessel bursts when exposed to high temperatures. You will explain the hazards associated with different pressurised tanks. 

One of the toughest challenges is putting out a burning person with a blanket or fire extinguisher - you will learn how to proceed. We demonstrate dust explosions. You need to know that some foods, such as potato flour, need to be stored in the right conditions. 

use of a powder extinguisher by the trainee

Why should you choose our course? 

  • We will come to the location nationwide; 
  • We have state-of-the-art rooms and equipment; 
  • We offer low prices; 
  • Tailored offer; 
  • Discount for large groups; 
  • Classes are held stationary at our branches; or we will travel to designated locations and provide training; 
  • We have many years of experience;  
  • We have professional instructors working with us; 
  • We will issue a certificate of completion of the course. 

Reliable learning at your fingertips 

All our fire safety courses on offer at the OSO Centre are distinguished by their excellent quality. We have several years of experience and know the needs of our customers. We take into account changing legislation and keep our knowledge up to date. With excellent instructors as well as modern rooms equipped with the right equipment, we create an environment that offers the opportunity for interesting meetings. We help you understand many aspects of life. 

Where will you meet us? 

We operate in cities such as Warsaw, Krakow, Katowice, Bielsko-Biala and others. 

The cycle of classes follows the schedule shown on the website.  

We conduct closed-door training courses for organised groups in our branches or at any given location. We will travel to the indicated locations (e.g. company headquarters, training room) anywhere in Poland. 

evacuation route and assembly point

How much does it cost? 

The price will depend on the number of participants. For large groups we anticipate discounts or even negotiation of the amount. We will give you an exact quote after you send us a message with your enquiry. This can be done via the form available on the website. Should you require other services related to fire safety, we are happy to help. We provide services in this area for business customers. We invite you to take a look at our offer. Should you have any questions, please do not hesitate to contact us. 

Why us? 

With our OSO Operators Training Centre you will complete the fire safety courses you need. We are characterised by a high level of teaching and full customer support. We offer all this at affordable prices. We will train your people properly to take up their work. We stand out for the exceptional quality of our services, which is why our team includes experienced instructors. 

fire regulations
[post_title] => Fire protection - training [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => fire-protection [to_ping] => [pinged] => [post_modified] => 2023-05-15 13:34:59 [post_modified_gmt] => 2023-05-15 11:34:59 [post_content_filtered] =>. [post_parent] => 1251 [guid] => https://oso.edu.pl/?page_id=2503 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[62] => WP_Post Object ( [ID] => 1227 [post_author] => 3 [post_date] => 2014-11-19 18:02:32 [post_date_gmt] => 2014-11-19 18:02:32 [post_content] =>
[metaslider id=615]
At the OSO Operator Training Center, we provide our business clients with full service in the field of occupational health and safety and fire safety. Thanks to our support, your company will function properly in this respect, which is why cooperation with us is a favorable solution - also in terms of price! In accordance with the legal requirements, every employer must take care of safety in their workplace - proper training of employees, preparation of workplaces, creating documentation and other activities in this regard. It is not necessary to hire experts in this field, but you can use outsourcing services to save a lot of money.Our health, safety and fire safety service for companies includes services such as:
  • conducting initial and periodic training for employees at all workplaces - general instruction and workplace instruction
  • OHS and fire protection supervision at the workplace and related documents
  • preparation of analyses and risk assessments
  • preparation of general and job instructions
  • conducting post-accident proceedings with documentation
  • technical and legal advice
  • audits and reviews of health and safety and fire protection in the workplace
We provide a full service in cities such as Warsaw, Krakow, Bielsko-Biala, Katowice and all over Poland with access to the customer. Prices of services are set individually depending on the scope of work - please contact our staff who will prepare a quote. Should you have any questions, we are also available.We invite you to make use of our services!
[post_title] => Occupational health and safety services [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => handle-bhp [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:25:22 [post_modified_gmt] => 2021-07-04 23:25:22 [post_content_filtered] => [post_content_filtered] => [post_parent] => 1139 [guid] => https://oso.edu.pl/?page_id=1227 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[63] => WP_Post Object ( [ID] => 1739 [post_author] => 3 [post_date] => 2021-07-02 10:25:11 [post_date_gmt] => 2021-07-02 10:25:11 [post_content] => [post_title] => UDT WDT TDT entitlements [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => permission-udt-wdt-tdt [to_ping] => [pinged] => [post_modified] => 2022-07-07 22:04:15 [post_modified_gmt] => 2022-07-07 22:04:15 [post_content_filtered] =>. [post_parent] => 22 [guid] => https://oso.edu.pl/?page_id=1739 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[64] => WP_Post Object ( [ID] => 1995 [post_author] => 3 [post_date] => 2021-08-19 08:21:26 [post_date_gmt] => 2021-08-19 08:21:26 [post_content] => A person with UDT qualifications for the maintenance of UDT devices can repair mobile platforms, cranes, forklifts or other devices on their own.Handling equipment is a category that includes, among others, cranes and other types of cranes, overhead cranes, hoists and winches, forklifts, basket lifts and other types of mobile platforms. All the devices listed are covered by the technical supervision of the Office of Technical Inspection. In practice, this means, among other things, that their repairs, maintenance and inspections cannot be carried out by random people, but only by those who have the authorization granted by the Office of Technical Inspection. For people who want to obtain the qualifications needed as a conservator, we have created an offer of courses covering theoretical and practical issues. Each participant of the course may take the state examination conducted in our center after the end of the course.

UDT course for conservators of handling equipment

Conservator training lasts between 32 and 96 hours. The exact duration is determined flexibly taking into account the needs of the trainees. Classes consist of lectures and practical exercises on the manoeuvring area.Each course is dedicated to the maintenance of a particular type of equipment. We organise courses in the maintenance of stationary mobile platforms, hanging platforms, mast platforms, railway platforms, aerial work platforms, overhead cranes, hoists and winches, forklifts, cranes and cranes.The framework timetable for each course is as follows:
    1. Issues related to the construction, types and mode of operation of devices.
    2. Legal regulations, technical supervision regulations.
    3. Health and safety rules applicable to operation and maintenance.
    4. Rules for removing the most common faults.
    5. Mechanical, hydraulic and electrical parts.
    6. Ways to take care of the proper technical condition of devices.
    7. Reading the operating instructions and technical documentation.
Equipment and necessary protective equipment are provided during the practical classes. All persons 18 years of age or older and with at least a primary school education can take part in the classes. We also require that you are in good health to work with the type of equipment in question.

Examination for UDT qualifications for equipment conservators

Taking the state examination is included in the course price. By taking the course, you do not need to register for the examination in addition - we do this on your behalf. The qualification examination takes place before a commission from the Office of Technical Inspection, which conducts a knowledge test and checks practical skills. Once you have passed the examination, you will be awarded an UDT licence valid for 5 consecutive years. They are valid for work throughout Poland.

Practical information for those interested in participating in the training

If you want to know the nearest dates and location of classes and sign up for the training, please visit the website https://platformaedukacji.pl/sklep/. There you will find up-to-date information and make online payments, which is tantamount to booking a place for the training. We can provide additional information by phone or e-mail.With UDT conservator qualifications, you can work full-time or run your own service [post_title] => Permission to repair and maintain UDT equipment: course with state examination [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => permissions-conservator-udt [to_ping] => [pinged] => [post_modified] => 2021-08-25 11:30:41 [post_modified_gmt] => 2021-08-25 11:30:41 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=1995 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[65] => WP_Post Object ( [ID] => 1229 [post_author] => 3 [post_date] => 2014-11-19 18:03:17 [post_date_gmt] => 2014-11-19 18:03:17 [post_content] =>
[metaslider id=655]
Proper management of occupational health and safety is crucial for the effectiveness of companies in this area. Thanks to us, you can be sure that your company will also function flawlessly in this area. We implement specialized health and safety management systems in accordance with the PN-N-18001 and OHSAS 18001 standards. Moreover, we provide our services in the development and implementation of procedures for occupational health and safety and fire safety.Why is it worth choosing the PN-N-18001 and OHSAS 18001 systems?
  • designing an individual security policy for the workplace
  • developing general and specific goals
  • implementation of systems and supervision over them
  • monitoring and correcting activities
  • introducing preventive actions
  • management review
With the PN-N-18001 and OHSAS 18001 management systems in occupational health and safety, you can improve the health and safety status of your company. For companies that want to operate also outside our country, we recommend choosing the OHSAS 18001 standard, which is internationally known. We are always ready to advise you, and we will also prepare the initial documents. With us, your company will be able to operate reliably!We provide our services in Warsaw in particular, but our specialists are also available in the OSO field offices in Kraków, Katowice and Bielsko-Biała. We also travel to our customers throughout Poland.We encourage you to make use of our service. Please do not hesitate to contact us if you have any questions!
[post_title] => Occupational health and safety management [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => management-bhp [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:40:45 [post_modified_gmt] => 2021-07-04 23:40:45 [post_content_filtered] => [post_content_filtered] => [post_parent] => 1139 [guid] => https://oso.edu.pl/?page_id=1229 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[66] => WP_Post Object ( [ID] => 1231 [post_author] => 3 [post_date] => 2014-11-19 18:04:43 [post_date_gmt] => 2014-11-19 18:04:43 [post_content] =>
[metaslider id=629]
Occupational risks are otherwise known as the probability of hazards - adverse events - occurring. These can affect workers, including their lives in the form of accidents or occupational diseases. According to the legislation, the employer must prepare a risk assessment for all workplaces and inform employees about these risks.We provide comprehensive assistance in the field of occupational health and safety - one of our specialities in this area is the preparation of occupational risk assessments, for which we use various methodologies. With the right methodology, the risks present on the job can be marked effectively and accurately.In our work, we use the following methodologies:
  • PHA - Preliminary Hazard Analysis - a method of preliminary hazard analysis
  • risk matrix according to the PN-N-18002 standard on a five-point scale
  • RISK SCORE - risk indicator - qualitative method of occupational risk assessment
  • KIM - For Hand Leverage - Key Indicators Method
  • FMEA - Failure Mode and Effect Analysis - analysis of the types and effects of possible errors
  • REBA - Rapid Entire Body Assessment - quick overall body posture assessment during work
  • HAZOP - Hazard and Operability Study - analysis of threats and operational capabilities
  • OWAS - Ovako Working Posture Analysis System - a method of static load analysis
  • other methods for the harmful factors for which the measurements were made
If you want health and safety at your workplace to be of a high standard, choose our services!
[post_title] => Occupational risk assessment [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => assessment-occupational-risk [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:27:25 [post_modified_gmt] => 2021-07-04 23:27:25 [post_content_filtered] => [post_content_filtered] => [post_parent] => 1139 [guid] => https://oso.edu.pl/?page_id=1231 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[67] => WP_Post Object ( [ID] => 1233 [post_author] => 3 [post_date] => 2014-11-19 18:05:26 [post_date_gmt] => 2014-11-19 18:05:26 [post_content] =>
[metaslider id=653]
The risk of accidents at work can be reduced by following the principles of occupational health and safety at work. Nevertheless, they cannot be prevented as a whole. When an accident at work occurs, it is necessary to initiate an accident procedure aimed at examining the circumstances of the accident, preparing appropriate documentation and implementing improvements that will prevent the occurrence of adverse events in the future.Accident procedure:
  • informing responsible persons and providing assistance to the injured or injured person
  • qualifying the event - determining whether the accident is related to the work performed, is an accident on the way to or from the road to work, an accident treated as an accident at work, etc.
  • determination of the circumstances of the accident at work
  • preparation of relevant documentation, including an accident protocol, and notification of relevant authorities
  • drawing conclusions from the event and applying preventive measures
At our Centre, we provide our clients with full support in the post-accident procedure, participating in it, notifying the relevant authorities and preparing the documentation. Thanks to us, the whole procedure is even easier to implement and the proposed preventive measures will prevent the occurrence of undesirable events in the future. We provide professional assistance, so by choosing our services, you can be sure that even in unexpected situations at the workplace, all procedures will be followed.Take advantage of our health and safety services!We would like to remind you that when an accident occurs at work, our specialists must be informed immediately.
[post_title] => Post-accident proceedings [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => post-accident proceedings [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:40:07 [post_modified_gmt] => 2021-07-04 23:40:07 [post_content_filtered] =>. [post_parent] => 1139 [guid] => https://oso.edu.pl/?page_id=1233 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[68] => WP_Post Object ( [ID] => 2001 [post_author] => 3 [post_date] => 2021-08-19 09:45:57 [post_date_gmt] => 2021-08-19 09:45:57 [post_content] => Movable mobile platforms: mobile - devices under technical supervision"Spiders" platforms are a type of mobile mobile platforms, i.e. those that are transported on car trailers. Specialists appreciate them due to the fact that they can be easily moved from place to place, small drive width, low weight, which allows you to work inside and outside, also in difficult terrain. For people who want to learn how to use these practical, compact devices, we suggest taking part in a course concluded with an exam before the UDT commission. Participation in classes, combined with practical exercises, is an effective way to prepare for the exam and gain qualifications that are required when working with this type of platforms.

Characteristics of mobile platforms - spiders

The most important information about the devices covered by the training:
  • According to the UDT classification, they belong to the category of mobile, mobile, mobile platforms
  • The devices are subject to technical supervision, and to operate them, it is necessary to have licenses issued by the Office of Technical Inspection
  • Stability during work and transport is ensured by arms resembling a spider's legs (hence the colloquial name of platforms)
  • They are equipped with wheels or tracks that enable them to move around the construction site or other terrain, but this drive does not allow them to move longer distances on their own
  • Long-distance transport takes place on car trailers
  • Their basket usually holds one or two employees
  • The reach and working radius of the boom are parameters depending on the lift model, the working height can be from several to several dozen meters
  • Application: works during construction: assembly of elements on the facade of the building - windows, gutters, roof elements, painting walls; renovation and maintenance works in buildings, repairs of lighting, roofs, etc., snow removal from roofs, repair of damaged power and telephone lines, works inside buildings: painting, repairs, warehouse service

Course - mobile mobile platforms

Course of trainingThe course is delivered in two parts: as a theory lecture and practical exercises. The Centre's instructors impart knowledge on the construction of the various elements of the platforms, teach the principles of safe use of the equipment, regulations related to technical supervision. Classes are held either in person, in various Polish cities, or online, on our learning platform.The practical part of the course is an opportunity to practice the skills acquired before the state exam. It takes place on a manoeuvring site, where participants use equipment from the Centre's base.The duration of the training, both theory and practical, is adapted to the level of advancement of the participants. It can range from a few hours to about 30 hours.

[video class="" mp4="https://oso.edu.pl/wp-content/uploads/2023/03/podnosnik-OSO.EDU_.PL-OSO-1-1.mp4" poster="https://oso.edu.pl/wp-content/uploads/2023/03/okladka-podnosnik-OSO.jpg"][/video].

Training participants

Courses for operators of mobile platforms are open to people who are at least 18 years of age, have a minimum of primary education and can demonstrate that they are in good health to work on the equipment.Training courses are open to people who want to learn how to operate from scratch, as well as those who already have basic knowledge and skills. At the registration stage, we ask customers about their operating experience so that we can assign them to the right group, with the right programme and number of hours of instruction.

Examination for UDT qualifications

The course concludes with an examination, which participants take at the Centre, in front of UDT examiners. Training courses have a programme adapted to the examination requirements. Class dates are set well in advance to align with the examination dates planned by the Office. The examination is conducted as a knowledge test, followed by a test of the candidate's practical skills.In order to ensure the highest possible pass rate for the examinations, we provide our clients with a learning platform that includes content to complement the course. The UDT publishes sample exam questions on its website - we collect a database of these on the platform to enable candidates to prepare for the exam. The platform also includes training scripts and videos showing how to operate the equipment.

UDT regulations - authorizations

Passing the state examination before the UDT commission means that the candidate is granted a licence. They are issued for a period of 5 years, after which time they can be renewed. The document confirming the qualification is the Certificate of Qualification for the Operation of Material Handling Equipment - it is valid in Poland and is required for any work position involving mobile platforms."Spider" platforms - small-sized devices used at construction sites and renovations [post_title] => Mobile platforms - mobile platforms (spiders) operation course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-mobile-pods-carriers-canoes [to_ping] => [pinged] => [post_modified] => 2023-03-15 00:29:57 [post_modified_gmt] => 2023-03-14 23:29:57 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2001 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[69] => WP_Post Object ( [ID] => 1235 [post_author] => 3 [post_date] => 2014-11-19 18:06:15 [post_date_gmt] => 2014-11-19 18:06:15 [post_content] =>
[metaslider id=584]
Workplaces that are exposed to the risk of accidents at work and that are conducive to the development of occupational diseases should be constantly checked for the presence of nuisance and environmental factors.They include factors such as:
  • excessive noise
  • microclimate at the workplace
  • inadequate lighting and its uniformity and intensity
  • mechanical vibrations affecting the upper limbs and the whole body
Thorough environmental surveys, using sophisticated equipment designed for this purpose, make it possible to identify harmful factors. Once the measurements have been taken, documentation is prepared with the results and indications for work in the respective working environment.In the OSO Centre's occupational health and safety section, we offer a comprehensive environmental testing service, which involves measuring the concentrations of chemical substances, dust, metals, gases, electromagnetic fields, as well as drawing up documents on harmful and arduous factors at workplaces. Our specialists will advise on how to prevent accidents at work and the development of occupational diseases in the event of unfavourable results of environmental tests.We provide our services throughout Poland. Our branches are located in the cities of Warsaw, Krakow, Katowice and Bielsko-Biala. We travel to customers and carry out the necessary measurements on site. Please contact us to discuss the details of our services. With the OSO Centre, you can be sure that every workplace in your company will be well examined!
[post_title] => Environmental research [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => research-environment [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:23:55 [post_modified_gmt] => 2021-07-04 23:23:55 [post_content_filtered] => [post_content_filtered] => [post_parent] => 1139 [guid] => https://oso.edu.pl/?page_id=1235 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[70] => WP_Post Object ( [ID] => 1237 [post_author] => 3 [post_date] => 2014-11-19 18:07:03 [post_date_gmt] => 2014-11-19 18:07:03 [post_content] =>
[metaslider id=528]
Health and safety at work should be a priority for every company. The implementation of appropriate solutions in this area is intended to reduce the risk of accidents at work, occupational illnesses and to improve the comfort of employees. However, the applied solutions do not always work properly, and sometimes they need to be developed completely from scratch - for this purpose, initial health and safety audits and additionally PPOŻ (fire safety) audits are carried out.We offer professional health and safety and PPOŻ audits. They are available in two variants:Mini control:
  • verification of guidelines related to occupational health and safety regulations in the workplace
  • checking that these guidelines are followed
  • interviewing employees
  • overall assessment of the company's condition
Maxi control:
  • scope of work of the Maxi Control
  • regular visits of the SPA Center experts at the workplace
  • advice on changes to regulations
  • accident audits
We use proven audit methods. We work using PN-N-18001 and OHSAS 18001 standards and risk assessment methodologies FMEA - Failure Mode and Effect Analysis and HAZOP - Hazard and Operability Study and others, which can be consulted in the section describing risk assessment.If you are interested in checking the correct functioning of health and safety solutions at your workplace, we encourage you to use our services. Our specialists will travel to you throughout the country and ensure that the audit is carried out correctly. Once the work is completed, we issue documents presenting the scope of the activities performed and the results and recommendations. You are welcome!
[post_title] => Health, Safety and Security Audit [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => audit-bhp-i-ppoz [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:23:15 [post_modified_gmt] => 2021-07-04 23:23:15 [post_content_filtered] => [post_parent] => 1139 [guid] => https://oso.edu.pl/?page_id=1237 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[71] => WP_Post Object ( [ID] => 1239 [post_author] => 3 [post_date] => 2014-11-19 18:07:49 [post_date_gmt] => 2014-11-19 18:07:49 [post_content] =>
[metaslider id=605]
We offer professional machine certification services under the Tools Directive 2009/104 / EC and the Machinery Directive 2006/42 / EC in accordance with European Union standards. Technical devices used in the works should be certified in accordance with the current legal regulations, which improves the level of occupational health and safety.We provide services such as:
  • we assess the conformity of machines under the Machinery Directive 2006/42 / EC
  • we adjust the machines to the minimum requirements in accordance with the provisions of the Tool Directive 2009/104 / EC
  • we develop risk assessments for machines in accordance with the PN EN ISO 12100 standard
  • we prepare conformity assessments for the EC Declaration of Conformity
  • we conduct machine safety audits
  • and we prepare other required documents in the scope presented
Why is certification of machinery necessary? According to European Union law, all machinery purchased after the date of Poland's accession to the EU, i.e. after 1 May 2004, must comply with safety and health requirements in accordance with the Directives. This applies in particular to CE markings and Declarations of Conformity. In the case of machinery purchased by the workplace before 1 May 2004, it is necessary to bring it into line with the minimum health and safety requirements.We always provide machinery certification services to a high standard. Our many years of experience mean that we are able to complete them on time and correctly, so that the documentation in your company is always appropriate. We travel to customers all over Poland. We encourage you to make use of our certification services!
[post_title] => Certification of machines [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => certification-machine [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:24:41 [post_modified_gmt] => 2021-07-04 23:24:41 [post_content_filtered] =>. [post_parent] => 1139 [guid] => https://oso.edu.pl/?page_id=1239 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[72] => WP_Post Object ( [ID] => 1241 [post_author] => 3 [post_date] => 2014-11-19 18:09:17 [post_date_gmt] => 2014-11-19 18:09:17 [post_content] =>
[metaslider id=639]
Employment of a disabled person requires appropriate preparation of the workplace - the working environment of a disabled person should meet their needs and be friendly to them. In our SPA Center, we are able to help you when you create such a position for a new employee. National and European regulations require that you provide the employee with safe working conditions. It is necessary to prepare an assessment of the workplace of a disabled person. It is a procedure of comprehensive analysis of the workplace and indication of ways to improve the health and safety at work and the comfort of work of a disabled person.The job evaluation for a disabled person includes, among others, activities such as:
  • checking whether the work is a risk factor and whether the disabled person can do it without any obstacles and risks for colleagues
  • determination of working conditions and hazards at a given workplace
  • determining the optimal system and working time
  • assigning tasks, their frequency and time for the disabled employee
  • determination of occupational risks for the workplace
  • indication of the necessary facilities for work, including appropriate equipment, materials, social and sanitary facilities
Our specialists will travel to your company and carry out all the necessary steps to determine the requirements of a position for a disabled person. We are able to provide this service nationwide with travel. When you have questions about our health and safety service, please give us a call or send us an e-mail - we will respond as soon as possible!
[post_title] => Evaluation of posts for people with disabilities [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => rating-positions-for-people-with-disabilities [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:28:26 [post_modified_gmt] => 2021-07-04 23:28:26 [post_content_filtered] =>. [post_parent] => 1139 [guid] => https://oso.edu.pl/?page_id=1241 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[73] => WP_Post Object ( [ID] => 2778 [post_author] => 6 [post_date] => 2023-03-21 17:39:03 [post_date_gmt] => 2023-03-21 16:39:03 [post_content] =>

Forklift truck operator training with variable reach 

We would like to invite you to forklift truck training courses at the Operators Training Centre. We have many years of experience in running courses and thousands of people across Poland have already benefited from our services. Telescopic handlers, due to their great capabilities, are now used in many industries. People with operator or maintenance qualifications are in demand. A course to operate or maintain these machines is a good investment in oneself, increasing one's attractiveness on the job market. 

forklift truck with variable reach during operation

We offer training in the operation and maintenance of telehandlers, but also other types of forklift trucks: 

  • electrical/high-voltage storage, 
  • combustion engines with exchange of LPG cylinders 
  • lifting, 
  • lifting the operator together with the load, 
  • forklift trucks. 

Operator course

Topics discussed on the course include: 

  • information on technical supervision, 
  • use of a specialised trolley, 
  • the device's electronic apparatus, 
  • telescopic loader mechanics, 
  • operator's duties before starting work, 
  • operator tasks during operation, 
  • activities that the operator must carry out after working on the equipment, 
  • health and safety rules for working with a telehandler, 
  • working under special conditions, 
  • classification of forklift trucks and types of authorisation. 

Course of training and examination 

Both types of courses consist of: 

  • the theoretical part, 
  • the practical part. 
specialised forklift truck with attachments

At the end of the training, the trainee takes an examination before a board of the Office of Technical Inspection. 

Entitlements 

After completing the training and passing the exam, the participant receives a qualification certificate confirming the qualifications obtained. UDT qualifications are recognised throughout Poland and the European Union. 

Maintenance course

During the variable reach forklift maintenance training course, trainees learn about: 

  • technical documentation and instructions for forklift trucks, 
  • general information on technical supervision, 
  • maintenance plan, 
  • health and safety rules when working on the equipment, 
  • technical conditions of technical supervision, 
  • any standards for forklift trucks/telehandlers, 
  • principles of forklift truck operation, 
  • cleaning methods for the equipment concerned. 

Telescopic handler - applications 

A telehandler is otherwise known as a specialised forklift truck. It is used in places where specific goods need to be transported quickly and efficiently. For this reason, it is used in industry, at bridge and road construction sites, steel structures, viaducts, in warehousing and agricultural work. 

Among the most widely known forklift truck manufacturers are: 

  • OMV, 
  • Toyota, 
  • Manitou, 
  • Bauman, 
  • Hako, 
  • Yale, 
  • BT, 
  • Hyundai, 
  • HC, 
  • Clark, 
  • Taski, 
  • OMG, 
  • Linde, 
  • Nissan,
  • Komatsu, 
  • Mitsubishi, 
  • Still, 
  • Jungheineich, 
  • Hyster,  
  • JCB, 
  • Merlo, 
  • Avent. 

Requirements 

Those wishing to become a maintenance or forklift operator should meet the following conditions: 

telehandler on a construction site
  • be at least 18 years old, 
  • have a minimum of primary education, 
  • present a medical certificate, certifying that there are no contraindications to performing the tasks of the job. 

Trust us 

By choosing to take advantage of our courses we guarantee: 

  • attractive prices, 
  • knowledge imparted by proven and practising lecturers, 
  • a set of required documents, 
  • solid preparation for the UDT exam, 
  • arranging all the formalities for the examination. 

Other services 

 We also provide additional services such as: 

  • servicing, repairing and upgrading equipment, 
  • assistance with the purchase of equipment. 

QUESTIONS FROM STUDENTS

We offer a course in the maintenance and operation of forklift trucks, telescopic handlers, ride-on forklifts, internal combustion engines with LPG cylinder, high lift/electric, lifting the operator together with the load.

As much as possible. After the course you will have the skills to operate forklifts manufactured by Manitou.

The requirements before taking the course are: age of majority, minimum basic education, certificate from an occupational physician.

Yes. They are different courses and you have to take an exam after each of them.

[post_title] => UDT COURSE FOR OPERATING VARIABLE PULLERS post_excerpt] => [post_excerpt [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-udt-car-operating-with-variable-lifts [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:36:50 [post_modified_gmt] => 2023-03-22 14:36:50 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2778 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[74] => WP_Post Object ( [ID] => 1243 [post_author] => 3 [post_date] => 2014-11-19 18:10:03 [post_date_gmt] => 2014-11-19 18:10:03 [post_content] =>
[metaslider id=625]
Work ergonomics is one of the key elements of occupational health and safety. A properly prepared workplace should be ergonomic, i.e. designed so that the performance of commissioned activities is easier, faster and at the same time does not cause an increased risk of accidents at work and occupational diseases. it meets the requirements of ergonomics. The following methods are used for this purpose:
  • KIM - Key Item Method - a method of key indicators for manual lifting
  • REBA - Rapid Entire Body Assessment - quick overall body posture assessment during work
  • OWAS - Ovako Working Posture Analysis System - a method of static load analysis
These methods allow for a comprehensive examination of the workplace to check its ergonomics. They take into account factors such as:
  • physical workload
  • mental stress
  • workplace anthropometry
  • working environment in terms of noise, hygiene, vibration and microclimate standards
  • arrangement of control and monitoring systems
  • and others depending on the workplace
By analysing all these factors, an up-to-date ergonomic assessment of the workstation can be determined and ways of improvement can be identified where these are recommended. After the ergonomic assessment, the client receives a letter with the analysis, assessment and recommendations.We carry out workstation assessments all over Poland, travelling to clients. You are more than welcome to use our services!
[post_title] => ergonomic assessment [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => evaluation-ergonomic [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:26:20 [post_modified_gmt] => 2021-07-04 23:26:20 [post_content_filtered] => [post_content_filtered] => [post_parent] => 1139 [guid] => https://oso.edu.pl/?page_id=1243 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[75] => WP_Post Object ( [ID] => 1245 [post_author] => 3 [post_date] => 2014-11-19 18:10:51 [post_date_gmt] => 2014-11-19 18:10:51 [post_content] =>
[metaslider id=642]
Psychosocial risks in the workplace not only cause stress, but also increase the risk of employee absenteeism, accidents at work and occupational diseases. Therefore, one of the important elements in the field of occupational health and safety is the assessment of psychosocial risks. Currently, the foreign standard BSI-PAS 1010: 2011: Guidance on the management of psychosocial risks in the workplace (it is a standard developed and accepted, among others, by European Agency for Safety and Health at work, Finnish Institute of Occupational Health, WHO, The Manufacturer's Organization, iMS Risk Solutions, Health and Safety Executive, European Trade Union Confederation, Central Institute for Labor Protection and other institutions), and also applies WHO recommendations: Health Impact of Psychosocial Hazards at Work: An overview 2010.When determining psychosocial risks in the workplace, the following factors must be taken into account:
  • work requirements - pace and time of work, number of tasks assigned, their frequency, physical and mental conditions
  • employee relations in the workplace
  • social relations and organizational culture in the workplace
  • employee control methods
  • the role of the employee in the workplace
We invite everyone interested in using our OHS services, including job evaluation, to use the service. Thanks to it, you can obtain detailed information on threats and implement solutions that prevent them from occurring. We invite!
[post_title] => Psychosocial risk assessment [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => evaluation-of-psychosocial-hazards [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:39:24 [post_modified_gmt] => 2021-07-04 23:39:24 [post_content_filtered] => [post_content_filtered] => [post_parent] => 1139 [guid] => https://oso.edu.pl/?page_id=1245 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[76] => WP_Post Object ( [ID] => 1247 [post_author] => 3 [post_date] => 2014-11-19 18:13:24 [post_date_gmt] => 2014-11-19 18:13:24 [post_content] =>
[metaslider id=396]

Knowing the rules of resuscitation, dressing wounds and evacuation is not only useful in the workplace, but also on a daily basis. By choosing our first aid course, you can obtain comprehensive knowledge in this field and obtain a relevant certificate of completion. At the OSO Operator Training Center, we offer first aid courses distinguished by the highest quality of education - with us, find out not only what first aid looks like in theory, because we also place great emphasis on practice.

First aid in the workplace

Pursuant to Art. 209 par. 1 point 2 of the Labor Code, the employer is obliged to provide the necessary resources in the event of emergency first aid, evacuation and fire fighting, and must appoint employees obliged to achieve these goals. The best choice is a qualified first aid course, which provides employees with the necessary knowledge and teaches how to act in the above-mentioned situations.

We train professionally

If you want to send your employees on a first aid course, you can do it with us! At the CSO Operator Training Centre, we have been providing this type of training for years. "First aid in life and health emergencies" is a class that covers both theory and practice, teaching you how to deal with emergency situations. Our instructors are always at your disposal and will ensure that your employees are thoroughly trained. Warsaw, Krakow, Bielsko-Biala and Katowice are our branches where you can sign up for classes all the time.We have modern facilities at our disposal, which include fully equipped training rooms, resuscitation manikins and other accessories that make our training so effective. Please see below for the range of topics covered in our classes.Theoretical part of the course
  • legal issues in the presented field
  • information on emergency numbers and proper notification of emergency services
  • rules for the evacuation of injured persons
  • proper securing of the accident site
  • treatment of injuries such as: burns, frostbite, fracture, foreign bodies in wounds, bleeding, head, chest, abdominal injuries, traumatic amputations
  • procedures in life and health threatening situations: poisoning, choking, epilepsy, electrocution or lightning, fainting, heart attack
  • checking vital signs in injured persons
  • principles of cardiopulmonary resuscitation in adults and children - cardiac massage and artificial respiration
Practical part of the classes
  • organization of evacuation with the selection of casualties
  • placing the casualty in a safe position
  • cardiopulmonary resuscitation
  • help in the following situations: traffic accidents, electric shock, lightning, drowning, choking, epilepsy, fainting, spine injuries and others

First aid course tailored to your needs

The first aid course we offer has the advantage of being flexible - we can tailor the course programme individually to the client's needs, enriching it with topics relating to specific workplaces and the risks present there.We conduct 'First Aid' training courses in two forms - open and closed. The former are intended for anyone interested, including people who want to acquire knowledge and skills in the above-mentioned area on their own. Closed first aid courses are intended for organised groups referred by employers or institutions.

Where do we operate

A qualified first aid course is a class available in our regular offer. The nearest dates for the cities of Warsaw, Krakow, Katowice and Bielsko-Biala, where our branches are located, are given on the website. If, on the other hand, you wish to order closed first aid courses for a group, then we can travel to practically any place in Poland, guaranteeing reasonable prices and high quality of education. The day and time of the classes is up to you. The price is set individually. We offer attractive discounts for larger groups.We invite you to "First Aid" training courses at the OSO Centre - Warsaw, Katowice, Bielsko-Biała, Krakow - sign up now!
[post_title] => First aid [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => first_help [to_ping] => [pinged] => [post_modified] => 2022-07-07 22:07:17 [post_modified_gmt] => 2022-07-07 22:07:17 [post_content_filtered] =>. [post_parent] => 22 [guid] => https://oso.edu.pl/?page_id=1247 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[77] => WP_Post Object ( [ID] => 1249 [post_author] => 3 [post_date] => 2014-11-19 18:14:30 [post_date_gmt] => 2014-11-19 18:14:30 [post_content] =>
[metaslider id=419]
When you want to carry out fire-fighting training, you can do it together with our OSO Operator Training Centre! We always conduct them at a high level, providing our customers with full support at affordable prices.Art. 209 par. 1 pt. 2 of the Labour Code states that the employer is obliged to provide its employees with the necessary means for fire fighting and evacuation, and must appoint employees to perform tasks in this regard. The best solution is a fire fighting course.We provide both initial and periodic training in occupational health and safety and fire safety. Thanks to us, your employees will always be properly prepared for their work. We are committed to ensuring that every fire safety training course is of the highest quality - we employ experienced instructors, have state-of-the-art facilities and place emphasis on a rich and stimulating learning programme. Thanks to us, each fire safety training course not only meets the legal requirements, but also provides very helpful knowledge on a day-to-day basis.

Our offer

We organize initial fire training for newly hired employees, which aim to familiarize themselves with the regulations and instructions applicable in the field of fire safety at a given workplace and teach how to proceed in the event of a fire. Periodic fire protection training is also available, the purpose of which is to supplement and update the knowledge. Each OHS and fire protection training consists of a theoretical and practical part, providing its participants with the necessary knowledge and skills.Topics of classes
  • information on fire hazards at the workplace
  • presentation of the workplace fire instructions
  • providing information on the location of fire equipment
  • principles of evacuation and fire marking
  • conducting evacuation and emergency procedures
  • principles of operation of handheld firefighting equipment
  • providing first aid to the injured
This subject is individually developed depending on the client's recommendations. Adjusting the program allows you to obtain the best educational results. Additionally, the classes are supplemented with practical exercises and demonstrations. After the end of the classes, participants receive appropriate certificates of their completion.

High quality of education

All fire protection courses offered by our Center are of high quality. We have several years of experience in our specialty and we know what our clients need. For this reason, each fire protection course and other types of classes are conducted taking into account the latest legal regulations, activating educational methods and under the supervision of competent instructors. We have modern training rooms, we have equipment that allows us to conduct interesting and therefore helpful classes.

Where do we operate

You can sign up for our fire protection training in the following cities: Warsaw, Kraków, Katowice, Bielsko-Biała. Classes are conducted periodically according to the schedule on our website. Organized groups are invited to a closed fire-fighting training for employees, which we organize both in our branches and in any place - we commute to workplaces, training rooms and other points throughout Poland.

Service prices

The price for the service depends primarily on the number of participants in the classes. For larger groups, we provide attractive discounts and allow for price negotiations. For a more detailed quote, please send us your enquiry via the form on the website.Should you require additional services in the area of fire safety, we can provide comprehensive assistance. We provide services in this area for business customers at affordable prices. You can view our offer on our website. If you have any questions, would like a quote for a service or would like to book places, please contact our staff.Come to the OSO Operator Training Centre for fire fighting training!
[post_title] => Fire fighting training courses [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => ppoz [to_ping] => [pinged] => [post_modified] => 2021-10-20 13:23:01 [post_modified_gmt] => 2021-10-20 13:23:01 [post_content_filtered] =>. [post_parent] => 22 [guid] => https://oso.edu.pl/?page_id=1249 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[78] => WP_Post Object ( [ID] => 2529 [post_author] => 7 [post_date] => 2022-09-16 09:11:35 [post_date_gmt] => 2022-09-16 09:11:35 [post_content] =>
boiler stoker

The Operators' Training Centre has a course in boiler and central heating furnace stoker in its training offer. We guarantee thorough training in the operation and supervision of central heating boilers, as well as auxiliary (control and measurement) equipment. This knowledge also overlaps with the requirements for the operation of regular furnaces, steam boilers, CO gas boilers as well as water scaffolding. You will find our full range of services on our website, as well as information about the organisation in the FAQ section. Should you have any further questions, please feel free to call our consultants. 

Curriculum 

At OSO, we strive to provide the right course of study for our trainees, i.e. comprehensive training covering both theoretical knowledge and practical skills. Groups are organised according to the results obtained in the initial competency test. In this way, they are made up of participants with a similar level of knowledge, so that we are able to provide the most necessary knowledge for our client, relevant to the skills they have. 

Knowledge Skills 
Proper control of the operation of exhaust and flue gas cleaning equipment Reading the indicators of the control and measurement apparatus 
Maintenance (supervision) of boilers and control, safety, auxiliary equipment Monitoring of the complete boiler operation from start-up 
Thermal technology news Monitoring systems for temperature, pressure, fuel supply 
Responsibilities of the position Monitoring of air draft meters 
Health and safety rules for operating thermal equipment Supervision of control and measurement equipment 
Diagram of a central heating boiler room Fire protection, emergency medical services 
Features of steam and water boilers - we present the general knowledge needed for proper and safe operation Application of acquired knowledge in the operation of industrial steam equipment 
Instruction in the operation of networks as well as thermal installations Operation of boilers 
Knowledge of solid fuels, liquid fuels Organisation of work on thermal equipment 
Knowledge of fittings and materials Correct reading of equipment instructions 
General provisions and selected problematic issues The use of water in thermal management 

What do we require? 

This is a minimum of eighteen years of age, at least primary school education and a health certificate issued by an occupational physician certifying that you can actively participate in the course. 

Our offer and how to get your G2/E qualification  

Together with OSO, you can count on competitive prices, a wide range of training courses and professionalism in the education of our course participants. We have highly qualified staff with many years of training and professional experience. We provide lectures in the form of webinars - real-time audio-video transmissions - as well as exercises in a training facility prepared for this purpose that meets all requirements. In order to consolidate the knowledge of our trainees, we supply them with the necessary materials by e-mail and also send them repetition tests. In this way, we aim to prepare the trainee for the examination that crowns our course, which is conducted by the qualification board of the Energy Regulatory Office (ERO). A positive result from the exam results in the G2/E certificate required to start working as a CO burner. 

Boiler and cooker burner 

CSO logo

A central heating stoker deals with the operation of central heating furnaces and boilers. These are appliances whose function is to supply heat, hot water and process steam to residential and industrial buildings. Our aim is to provide the necessary knowledge for certification and to train future employees responsible for the operation of boilers and furnaces. In order to provide our trainees with the best possible education, we ensure that they consolidate their knowledge with the help of additional material in the form of short tests. In this way, our customers not only acquire knowledge in class, but also at home. 

Central heating boilers - unit characteristics 

In order to provide an efficient yet safe way to heat residential or office buildings, central heating boilers are used which, due to the different needs of the users, differ in the way they are installed. The boiler stoker has the skills to carry out the correct, and at the same time safe, installation of the boiler. The installation and supervision of the boiler, should be carried out by a person who is familiar with the equipment and who has completed courses providing them with the necessary knowledge of safety rules. In spite of the technological improvements made to the boilers, their continued operation without monitoring could lead to failure (explosion or asphyxiation). It is therefore correct and sensible to entrust both the installation and the supervision to a person qualified to do so, with the necessary authorisation, which we help to obtain.  

We teach our trainees how to use numerous safety features, such as automated fuel metering, which is designed to facilitate the operation of the boiler, ensuring the safety of users. In this way, a person who is familiar with the regulations in force, as well as possessing the necessary skills, is able to ensure the safe and functional operation of the equipment in question. 

central heating boilers

Health and Safety 

A correct heating system should be installed on a non-combustible base, and likewise its surroundings should be free of flammable materials to prevent a fire from breaking out. Health and safety rules include correct operation of the appliance and its maintenance - regular cleaning of the boiler and flue pipes, also in the case of heating boilers, it is mandatory to remove soot from the chimney. Cyclical chimney inspections and proper ventilation prevent the boiler room from being smoky. Chad is the main danger for the CO burner, so it is advisable to permanently open the supply duct. Boilers should be inspected periodically to avoid unexpected accidents during operation. Any faults noticed should be reported immediately to the supervisor and the services of heating equipment repair specialists can be used. We warmly invite you to cooperate with OSO. 

We offer open and closed training courses throughout Poland, please call us to sign up for training. 

SEP-G2 course
[post_title] => Boiler and cooker stoker course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => smoker-boiler-and-stove [to_ping] => [pinged] => [post_modified] => 2023-08-31 08:38:34 [post_modified_gmt] => 2023-08-31 06:38:34 [post_content_filtered] =>. [post_parent] => 1550 [guid] => https://oso.edu.pl/?page_id=2529 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[79] => WP_Post Object ( [ID] => 1508 [post_author] => 3 [post_date] => 2017-10-03 00:54:04 [post_date_gmt] => 2017-10-03 00:54:04 [post_content] =>
To carry out work at height, it is necessary to have appropriate height licenses, which are also referred to as mountaineering licenses. By choosing our altitude course, you can get them. At the SPA Operators Training Center, we conduct classes that allow you to obtain permission to work at height. We provide comprehensive and professional service and affordable prices. In accordance with the Act of June 26, 1974, the Labor Code (Journal of Laws No. 24, item 141, as amended) and the ordinance of the Minister of Labor and Social Policy of September 26, 1997 in on general provisions on health and safety at work, as amended d. (consolidated text: Journal of Laws of 2003, No. 169, item 1650) working at height requires appropriate preparations, which also include the need to train employees. In this case, the employer should send employees to a mountaineering and altitude course. It is also possible to take part in classes as an individual.

Altitude training - rope and construction access

As working at height with the appropriate mountaineering equipment can be divided into rope access and construction access, we also offer two types of training.Rope access training is aimed at people who want to work as rope climbers. It is designed for people who want to carry out jobs such as installing advertising and other installation work, tree pruning, tree felling, window cleaning at height, snow removal from roofs, facade painting, mast handling. [video class="" mp4="https://oso.edu.pl/wp-content/uploads/2023/03/wspinacz-OSO.EDU_.PL-OSO-2.mp4" poster="https://oso.edu.pl/wp-content/uploads/2023/03/okladka-alpinista-OSO.jpg"][/video].Construction access training is designed for workers who need to climb, for example on structural elements, to get to a work site. They are designed for workers in the construction, roofing, telecommunications, electricity sectors, among others.The training courses include a theoretical and a practical part, allowing participants to be comprehensively prepared to carry out work at height.The training program includes, among others, the following issues:
  • legal and health and safety requirements
  • characteristics of mountaineering works
  • hazards related to working at height
  • selection, use and control of equipment
  • rescue techniques
  • individual and collective insurance
  • health and safety rules
  • practical exercises
At the end of the class, participants take an exam. If they pass the exam, they are awarded a height certificate. The licence is valid for 3 years. After this time, they must be renewed by attending a refresher course.Should you have any further questions, we are at your service. We warmly invite you to take advantage of training at our OSO Centre!
[post_title] => Altitude course [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-height [to_ping] => [pinged] => [post_modified] => 2023-03-14 23:56:09 [post_modified_gmt] => 2023-03-14 22:56:09 [post_content_filtered] =>. [post_parent] => 22 [guid] => https://oso.edu.pl/?page_id=1508 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[80] => WP_Post Object ( [ID] => 1255 [post_author] => 3 [post_date] => 2014-11-19 18:18:20 [post_date_gmt] => 2014-11-19 18:18:20 [post_content] =>
[metaslider id=1336]
Compliance with occupational health and safety regulations is able to reduce the risk of accidents at work, occupational diseases and generally increases the comfort of work. Occupational Health and Safety is a wide set of legal acts, norms, regulations and guidelines that present how to care for workplaces and how to perform designated tasks in order to minimize their negative effects. In Poland, the National Labor Inspectorate (PIP) is responsible for compliance with health and safety regulations. Occupational health and safety regulations apply to every employer, including self-employed persons. However, you can use outsourcing services in this area, entrusting activities to external specialists. Such services are provided by many companies throughout the country. Their specialists can provide full health and safety services, carry out audits, supervision, training, post-accident proceedings, prepare documents and provide other types of services as part of their position.Regulations:
  • Labor Code, Chapter X
  • regulation on general provisions on health and safety at work (Journal of Laws of 1997, No. 129, item 844, as amended)
  • Polish Standards, including PN-N-18001: 2004
  • ISO 9001 quality management standards or ISO 14001 environmental management standards
  • and other types of regulations
Employers who do not comply with health and safety regulations run the risk of being liable to PIP. Periodically conducted inspections are to verify the correct operation of the plant and if any irregularities are found, the company is subject to penalties.
[post_title] => Health and safety regulations [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => regulations-bhp [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:47:36 [post_modified_gmt] => 2021-07-04 23:47:36 [post_content_filtered] =>. [post_parent] => 1253 [guid] => https://oso.edu.pl/?page_id=1255 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[81] => WP_Post Object ( [ID] => 1257 [post_author] => 3 [post_date] => 2014-11-19 18:18:52 [post_date_gmt] => 2014-11-19 18:18:52 [post_content] =>
[metaslider id=1343]
Employers are obliged to comply with the provisions on health and safety at work. These regulations indicate what should be done to reduce the risk of accidents at work, occupational diseases and other hazards at the workplace. Failure to comply with health and safety regulations exposes both the employer and employees, which is why it is so important to meet the requirements in this regard.The employer's obligations in the field of health and safety include, among others:
  • ensuring proper protection of health and life of its employees
  • organization of work in accordance with the provisions of occupational health and safety
  • responding to the needs of employees
  • preventing occupational diseases and accidents at work
  • implementation of the decisions, orders and orders of the supervisory authorities
  • initial and periodic training in occupational health and safety and fire safety
  • providing workers with data on occupational risks and hazards in the workplace
  • presenting employees with activities related to the reduction and elimination of hazards at the workplace
  • appointing employees responsible for the implementation of fire fighting, first aid and evacuation activities
  • delivery of personal protective equipment
  • proper equipment of work stations
  • care for the technical condition of machines
Specialists working in this field can help companies meet OHS requirements. It is not necessary to hire your own specialists, you can use outsourcing services - external provided at more attractive prices.
[post_title] => Health and safety requirements [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => requirements-bhp [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:53:21 [post_modified_gmt] => 2021-07-04 23:53:21 [post_content_filtered] =>. [post_parent] => 1253 [guid] => https://oso.edu.pl/?page_id=1257 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[82] => WP_Post Object ( [ID] => 2537 [post_author] => 7 [post_date] => 2022-09-16 10:18:05 [post_date_gmt] => 2022-09-16 10:18:05 [post_content] =>
professional staff

Construction machinery operation course

The Operators Training Centre (OSO) offers you a course on operating a road roller, excavator and scaffolding assembly and disassembly. If you are interested in becoming a certified operator, take advantage of our offer! 

Why CSOs? 

Our strengths: What do we offer? 
Professional staff Certificates of completion 
Attractive prices Remote learning 
Comprehensive training (theory + practice) Additional learning material (review tests) 
Training facilities Friendly atmosphere 
Preparation for the examination Fresh start - a group with a similar level of experience 

We have been providing training services for more than fifteen years and are characterised by affordable prices, a friendly atmosphere and professionalism. What's more, we have highly qualified staff with extensive professional experience and numerous training facilities that meet all safety requirements.  

At OSO, we divide the course participants into groups based on the results obtained in the competency test, so we are able to provide everyone with learning adapted to their needs and current skills. What's more, to ensure that our clients do well on the exam, we have prepared additional material in the form of revision tests to consolidate their knowledge.   

What are the activities like? 

roller and other site equipment

We have introduced remote teaching, i.e. lectures in the form of webinars - real-time audio-video transmissions, in this way we can provide both comfort and security for our clients. Practical classes take place in specially prepared facilities, adapted to all safety requirements and with the necessary learning equipment.

Our requirements 

  • at least 18 years of age,  
  • education at primary level, 
  • a medical certificate stating that there are no contraindications to work in the profession. 

Employment 

Thanks to technical improvements, the overall efficiency and performance of construction machinery is resulting in its widespread use on building sites. Those qualified as road roller or excavator operators will be able to count on much better employment opportunities in the construction industries. 

Road roller - work and entitlements 

Obtaining a qualification to carry out construction work, using a roller, can prove to be a very good choice when looking for a job in the construction sector, especially companies involved in road, rail or airport construction. A person who is familiar with current health and safety regulations will be able to carry out work that involves compacting soil and asphalt, creating a flat surface, using a road roller. The roller is most commonly used for asphalt roads, extensive car parks, squares, playing fields or runways.  

In order to be a road roller operator, one must hold a Class III qualification - this is a document certifying that one is qualified to be an operator in the spectrum of working, road and construction tasks on machinery and equipment subject to Class III. By completing such a course, our client can seek employment in many companies providing construction services, as the demand for people familiar with machines and their control is not decreasing. The training carried out at OSO takes place at training facilities equipped with all the necessary equipment that meets quality and safety requirements. 

excavator on the road

Excavators - OSO course 

Students undertaking the excavator course will be able to find employment after training in construction work that requires earthmoving activities such as separating rock material and transporting it to a truck or landfill. Models vary according to the material they handle (e.g. sand, gravel, coal), as well as the lifting capacity - for this reason, excavator qualifications have been divided into classes, these are: 

  • Class III - working with single-head excavators up to 25 tonnes operating weight. 
  • Class I - working with single-head excavators over 25 tonnes operating weight. 

The order in which qualifications are obtained depends on the level of experience - the heavier the machine the greater the risk, and the greater the danger caused by an accident. Therefore, a candidate for an excavator operator will need to acquire a Class III rating first, followed by a Class I rating. 
 

Together with us you can expand your skills and qualifications, check out our other offers which can be found on our website. These include training courses for UDT, occupational health and safety and fire safety, if you are interested in gaining qualifications use our services!

[post_title] => Construction machinery - vocational training [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => construction machinery [to_ping] => [pinged] => [post_modified] => 2023-03-14 18:14:15 [post_modified_gmt] => 2023-03-14 17:14:15 [post_content_filtered] => [post_content_filtered] => [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2537 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[83] => WP_Post Object ( [ID] => 2794 [post_author] => 6 [post_date] => 2023-03-21 17:40:22 [post_date_gmt] => 2023-03-21 16:40:22 [post_content] =>

Sale of used and new UDT forklift trucks 

Repairing forklift trucks is an extremely responsible task that should be entrusted to service professionals. We provide services such as stationary forklift truck repairs, which are also possible on a mobile basis at the location indicated by the customer. By entrusting us with the repair of your forklift truck, you can be sure of an accurate diagnosis, efficient expert assistance and servicing of all defective components. 

forklift in the workshop

What do you gain by using our services? 

  • saving time and money; 
  • reliable service; 
  • individual approach; 
  • Your comfort and convenience of professional equipment; 
  • professional advice from our technicians. 
     
     

What does our offer include? 

In addition to the diagnosis and servicing of UDT machines, we also offer the possibility of renting as well as purchasing equipment. Without a doubt, our wide range of products makes it possible to find the right vehicle to meet the buyer's requirements. With the rapid growth of industry, companies with advanced production volumes have emerged on the market, which has brought logistical problems involving the efficient storage and handling of goods. To remedy this, by ensuring the efficient transport of parts within the company and storing them efficiently, we should invest in a forklift truck. Our facility responds to the growing needs of our customers by providing a guarantee on the equipment purchased. 

Sale of forklifts 

The forklift package we make available is superbly suited to transporting pallets. These utility machines are designed to move freely around warehouses of various sizes. We have machines in various weight classes, with load capacities that can be adapted to your individual needs. We encourage you to decide on the purchase of an all-terrain forklift for work involving the loading of heavy goods and transport over unpaved areas. This is due to the fact that they are equipped with diesel engines, have ground clearance and large wheels, allowing free off-road movement.  
 

forklift truck lifting a load

Forklift truck rental 

Forklift trucks are undoubtedly on the list of needs of many companies that carry out orders in various sectors of work. Our rental company has been meeting the expectations of even the most demanding customers for years. We are stocked with both LPG gas-powered models as well as diesel machines and their electric counterparts. By renting our forklifts, you can meet the challenges of your industry in no time by sourcing the specific type of forklift you currently need. 

 The price of hiring equipment depends on the following factors

  • load capacity; 
  • drive type; 
  • work intensity; 
  • rental period.  

We tailor each rental service to the individual customer's needs, proposing a machine that fully meets the client's requirements. Factors such as working conditions, the type of surface on which the machine will move, the terrain, the maximum weight of the load and the height and dimensions of the lift are all crucial in deciding on the choice of forklift truck. When you choose our rental company, you can count on the full professionalism of our services, as we meticulously check the technical condition of our equipment to guarantee the full safety of the rental staff.  
 

Forklift truck maintenance 

A regular forklift inspection is, above all, an important preventive measure which allows potential problems to be identified early. This check-up ensures that your machine is safe and comfortable to use. Systematic maintenance is also an excellent way to save time and money while waiting for potential breakdowns to be serviced. A great way to implement regular maintenance in your company is to use checklists to ensure that every component of the forklift truck has been checked before putting it into service.  

forklift truck in service

Basic elements to be diagnosed

  • hydraulic hoses; 
  • oil level; 
  • fluid levels; 
  • condition of forks;  
  • the general condition and proper operation of the trolley. 
     

About us 

Our company specialises in the rental and sale of new and used forklift trucks. We offer equipment from a number of renowned brands and also provide professional forklift truck servicing (including diesel and electric forklifts). 

Our focus is on ensuring that our customers find products fully adapted to their needs and expectations. It is also worth mentioning that before any of the equipment is listed in our offer, it each time undergoes a comprehensive technical inspection and possible service. 

You are more than welcome to contact us, we are fully available! 

QUESTIONS FROM STUDENTS

We provide service for UDT machines from various manufacturers, these include Linde, Still, Jungheinrich and Toyota.

In addition to the diagnosis and servicing of UDT machines, our offer also includes the possibility of renting or purchasing equipment for internal or external use.

[post_title] => Forklift truck service [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => lift truck service [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:35:27 [post_modified_gmt] => 2023-03-22 14:35:27 [post_content_filtered] =>. [post_parent] => 2842 [guid] => https://oso.edu.pl/?page_id=2794 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[84] => WP_Post Object ( [ID] => 1259 [post_author] => 3 [post_date] => 2014-11-19 18:19:36 [post_date_gmt] => 2014-11-19 18:19:36 [post_content] =>
[metaslider id=1335]
First aid is regulated on the legal side. They apply to every person and, in addition, to employers, setting out the requirements for them in situations where there is a risk of harm to health or loss of life.Regulations:
  • Labor Code - the act amending the act of November 21, 2008 (Journal of Laws No. 223, item 1460), Art. 2091
  • Regulation of the Minister of Labor and Social Policy of September 26, 1997 on general provisions on health and safety at work (Journal of Laws of 2003, No. 169, item 1650, as amended)
  • Act of September 8, 2006 on the State Medical Rescue
  • Act of June 6, 1997 - Penal Code, Art. 26 and 162
  • Traffic rules
According to the legislation, any person who fails to provide first aid to a person in imminent danger of loss of life or harm to health risks imprisonment of up to three years. Employers are obliged to provide employees with adequate first-aid facilities - hygiene products, hygiene and sanitary equipment and first-aid measures for emergencies. The basic equipment is a first aid kit. The equipment of the first aid kit depends on the work profile of the establishment and the number of employees.In addition, it is necessary to train at least one employee who will be responsible for first aid in the workplace. This should be done by means of courses that provide all the key information on the subject.
[post_title] => Recipes - first aid [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => recipes-first-aid [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:47:02 [post_modified_gmt] => 2021-07-04 23:47:02 [post_content_filtered] => [post_parent] => 1253 [guid] => https://oso.edu.pl/?page_id=1259 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[85] => WP_Post Object ( [ID] => 1261 [post_author] => 3 [post_date] => 2014-11-19 18:20:20 [post_date_gmt] => 2014-11-19 18:20:20 [post_content] =>
[metaslider id=1332]
The Labor Code, and more precisely the Act Amending the Act of November 21, 2008 (Journal of Laws No. 223, item 1460), Art. 2091 defines the requirements for employers in the field of first aid. All employers are required to comply with the first aid requirements.The regulations oblige employers to:
  • providing resources necessary to provide first aid in the event of fire, evacuation or other emergencies
  • indication among employees of the person who will be responsible for providing it
  • ensure liaison with emergency services
At the workplace, the employer must designate an employee to handle first aid measures. A pre-medical first aid course, which includes theoretical information and practical exercises, can be used for this purpose. The employer may also have all employees trained in first aid. At the end of the training, the participants receive appropriate certificates.First aid measures at the workplace must be individually tailored to the company's business profile, as well as the number of employees and the type of risks. To this end, the employer can make use of advisory services provided by specialists. Employers who do not comply with the provisions of the Code of Law and other first aid regulations risk financial penalties.Anyone interested in taking advantage of services of this kind is cordially invited to make use of the services at our Centre!
[post_title] => First aid - requirements [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => first-help-requirements [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:44:20 [post_modified_gmt] => 2021-07-04 23:44:20 [post_content_filtered] =>. [post_parent] => 1253 [guid] => https://oso.edu.pl/?page_id=1261 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[86] => WP_Post Object ( [ID] => 1263 [post_author] => 3 [post_date] => 2014-11-19 18:21:07 [post_date_gmt] => 2014-11-19 18:21:07 [post_content] =>
[metaslider id=1333]
Compliance with fire safety regulations is crucial to the safety of facilities, buildings, sites and employees. The fire safety regulations address basic and specific issues related to the safety of work and employees.The most important provisions of fire protection include:
  • Act of August 24, 1991 on fire protection. (Journal of Laws of 1991, No. 81, item 351, as amended)
  • Regulation of the Minister of Internal Affairs and Administration of 7 June 2010 on fire protection of buildings, other structures and areas (Journal of Laws of 2010, No. 109, item 719)
  • Regulation of the Minister of Internal Affairs and Administration of 24 July 2009 on fire-fighting water supply and fire roads. (Journal of Laws of 2009, No. 124, item 1030)
  • Regulation of the Minister of Infrastructure of April 12, 2002 on technical conditions to be met by buildings and their location (Journal of Laws of 2002, No. 75, item 690, as amended)
Moreover, Polish Standards are applicable:
  • PN-N-01256-5 in the topic Safety signs. Rules for placing safety signs on escape routes and fire routes
  • PN-B-02852: 2001 entitled Calculation of the fire load density and determination of the relative fire duration.
  • PN-92 / N-01256/02 on Safety signs. Evacuation
  • PN-92 / N-01256/01 in the topic Safety signs. Fire protection
In enterprises, facilities, buildings and on premises, employers, managers and owners are required to implement fire protection solutions in accordance with the requirements of the regulations.
[post_title] => fire safety - regulations [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => ppoz-prescription [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:45:42 [post_modified_gmt] => 2021-07-04 23:45:42 [post_content_filtered] => [post_content_filtered] => [post_parent] => 1253 [guid] => https://oso.edu.pl/?page_id=1263 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[87] => WP_Post Object ( [ID] => 1265 [post_author] => 3 [post_date] => 2014-11-19 18:21:59 [post_date_gmt] => 2014-11-19 18:21:59 [post_content] =>
[metaslider id=1334]
The most important fire protection regulations are contained in the Act of 24 August 1991 on fire protection. (Journal of Laws 1991 no. 81 item 351 as amended). They oblige employers to carry out activities concerning fire protection.Managers or owners of buildings, facilities or land, as well as their users, in accordance with the applicable legal regulations, are obliged to:
  • compliance with technological, construction and installation requirements in the field of fire protection
  • providing the facility with appropriate fire and rescue equipment, depending on the requirements in this regard
  • carrying out systematic repair and maintenance works on fire-fighting and rescue equipment in order to prevent their failures
  • defining the evacuation procedure and procedures in the event of a rescue operation
  • familiarize employees with applicable fire regulations
  • appointing an employee responsible for the implementation of fire protection regulations
Failure to comply with fire safety regulations can expose you to penalties. Specialists with qualifications granted by the State Fire Service are appointed to carry out inspections.The implementation of fire safety regulations in companies is easier if external companies are used. They are the ones who can take care of professional training of employees and other activities - preparing documentation, including fire safety instructions, preparing buildings for acceptance and others. You can make use of such services at our CSO Centre!
[post_title] => PPE - requirements [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => ppoz-requirements [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:46:22 [post_modified_gmt] => 2021-07-04 23:46:22 [post_content_filtered] =>. [post_parent] => 1253 [guid] => https://oso.edu.pl/?page_id=1265 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[88] => WP_Post Object ( [ID] => 2801 [post_author] => 6 [post_date] => 2023-03-21 17:41:23 [post_date_gmt] => 2023-03-21 16:41:23 [post_content] =>

UDT equipment service 

forklift in the workshop

The company "OSO" has many years of experience in carrying out servicing of lifting machinery. We carry out maintenance, regeneration, modernisation and repair activities. We also carry out periodic inspections and complete the necessary paperwork related to this. We deal with any faults we discover in an expeditious manner. 

These machines are subject to heavy use due to their frequent use. So regular periodic maintenance can guarantee considerable safety and optimise uptime.  

Maintenance services 

In our service we perform: 

  • audits, 
  • rectify the failures and defects detected, 
  • hydraulic and electronic system diagnostics, 
  • maintenance of machinery, 
  • service documentation, 
  • upgrading of equipment, 
  • reconditioning of equipment and replacement of parts, 
  • total equipment repairs. 

Haulotte mobile platforms

UDT devices - what are they? 

UDT machines are commonly referred to as 'heavy vehicles' and fall under the Technical Inspection Authority. Those wishing to carry out work with them must have a licence, which is issued by the UDT. These devices are typically used for transport, construction or unloading and loading work. The breakdown of UDT equipment is as follows:  

  • fuel vapour recovery equipment, 
  • pressure equipment, 
  • non-pressurised equipment, 
  • handling equipment. 

Routine inspections 

The Office of Technical Inspection, according to established regulations, requires the person in possession of a machine to first register it and then also to carry out regular inspections. Any person in possession of such equipment is obliged, according to the regulations in force, to inspect it on a date previously set by the Technical Inspection Authority. If the person concerned does not turn up on time for the inspection, he or she may receive a financial penalty. The inspection is confirmed by a statement issued by the OTI. In our company, inspections are carried out at a fast pace, as we are keen to ensure that the customer does not have to hold up work at the plant for too long.  

Scope of service work 

Our service workshop mainly undertakes work with handling equipment, and these include: 

  • gantries, 
  • cranes of various types, 
  • mobile platforms,
  • crane-lifts, 
  • telescopic loaders, 
  • forklift trucks. 

crane during repair

Mobile service 

Our company offers a professional mobile service for lifting machinery, which we tailor to your individual needs. We have a qualified team of technicians who are ready to act quickly and efficiently on site to restore your machines to full working order. 

Training service 

We provide training for people willing to undertake work with UDT equipment. The offer is aimed at people who want to become operators or maintainers. The courses are run by a professional group of lecturers who will carefully prepare you for the state exam. 

QUESTIONS FROM STUDENTS

Yes, those in possession of a UDT machine are obliged to carry out the inspection within the timeframe set by the Technical Inspection Authority.

Of course. We provide other services such as training for those interested in becoming a maintenance or UDT machine operator.

[post_title] => Repair of lifting equipment [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => repair-urzadzen-dzwigowych [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:29:06 [post_modified_gmt] => 2023-03-22 14:29:06 [post_content_filtered] =>. [post_parent] => 2842 [guid] => https://oso.edu.pl/?page_id=2801 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[89] => WP_Post Object ( [ID] => 1267 [post_author] => 3 [post_date] => 2014-11-19 18:22:30 [post_date_gmt] => 2014-11-19 18:22:30 [post_content] =>
[metaslider id=1341]
Health and safety work is carried out by people who have the necessary training and qualifications for this purpose. Those who work as inspectors or specialists in occupational health and safety must have completed a course of study, a diploma or a course for this purpose and also have experience in the job. Currently, training can be obtained from many institutions, so the choice of companies in the field of occupational health and safety is also considerable.Necessary requirements for work in positions related to health and safety:
  • inspector - the profession of a health and safety technician
  • senior inspector - the profession of a technician and at least 3 years of work experience, higher education or postgraduate studies
  • specialist - higher education in the field or postgraduate studies, at least 1 year of internship in the service of occupational health and safety
  • senior specialist - at least higher education in the field or postgraduate studies, at least 3 years of practice in the profession
  • main specialist - higher education in a given field of study or specialization, postgraduate studies and at least 5 years of internship in the profession
Currently, there is no need to employ people responsible for the health and safety status of a company. External outsourcing services, which are provided by competent companies, can be used for this purpose.When choosing a company of this kind to provide occupational health and safety services, it is worth paying attention to whether its employees have the relevant qualifications. It is additionally worth paying attention to experience and references when selecting it.
[post_title] => Health and safety qualifications [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => entitlements-bhp [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:52:12 [post_modified_gmt] => 2021-07-04 23:52:12 [post_content_filtered] =>. [post_parent] => 1253 [guid] => https://oso.edu.pl/?page_id=1267 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[90] => WP_Post Object ( [ID] => 1523 [post_author] => 3 [post_date] => 2017-12-06 12:05:17 [post_date_gmt] => 2017-12-06 12:05:17 [post_content] =>

Crane training

[metaslider id=1597]
The crane operator must hold the relevant UDT qualifications. These are granted after taking and successfully passing an examination. To obtain the knowledge and skills necessary to work as an overhead crane operator, we invite you to take an overhead crane course. At the OSO Operator Training Centre, we provide our customers with comprehensive and professional training at affordable prices.Our UDT courses are aimed at those wishing to obtain crane qualifications - they impart extensive knowledge and include practical exercises, preparing you for the UDT exam.

We offer classes according to the UDT classification:

  • II S - cranes, hoists and winches of category II W operated from the working level and stationary workshop cranes
  • IS - cranes, hoists and winches in the IW category operated from the working level or from the cabin and stationary workshop cranes
During the classes, we use modern teaching methods. Our instructors are qualified and experienced people who care about the quality of education. Thanks to this, our center can boast a high rate of success.

The training program includes, among others, the following issues:

  • types of devices and their construction
  • operator's duties before starting work, during and after work
  • technical supervision of devices
  • Health and safety at work
After passing the exam, the participant obtains a crane licence confirmed by a qualification certificate. We conduct examinations in cooperation with UDT Warsaw and branches in other cities. UDT authorisations for cranes are granted for 5 or 10 years.

[video class="" mp4="https://oso.edu.pl/wp-content/uploads/2023/03/suwnice-OSO.EDU_.PL-OSO-2.mp4" poster="https://oso.edu.pl/wp-content/uploads/2023/03/okladka-suwnice-OSO.jpg"][/video].

To register for classes, you must have:

  • at least 18 years of age
  • at least basic education
  • no contraindications to work as confirmed by an occupational medicine doctor
If you are interested in a crane course, the price at OSO is very attractive. For up-to-date information on the dates of our training courses, please contact us by e-mail or telephone. Please also contact us if you have additional questions - we will respond as quickly as possible.We warmly invite you to choose crane training at our OSO Operator Training Centre! [post_title] => UDT training for cranes - enrol at OSO! [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => training-on-cranes [to_ping] => [pinged] => [post_modified] => 2023-03-15 00:40:59 [post_modified_gmt] => 2023-03-14 23:40:59 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=1523 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[91] => WP_Post Object ( [ID] => 1269 [post_author] => 3 [post_date] => 2014-11-19 18:23:07 [post_date_gmt] => 2014-11-19 18:23:07 [post_content] =>
[metaslider id=1342]
In order to work in fire service positions, you need to obtain the relevant qualifications. These are awarded through the completion of courses and studies. Companies that offer fire protection services should have the relevant qualifications.Fire-fighting qualifications can be obtained by completing a fire-fighting school - there are several fire-fighting schools in Poland. These include the Main School of Fire Service in Warsaw, the Schools of State Fire Service Aspirants in Krakow or Poznan, or the Central School of State Fire Service in Czestochowa. Completion of the relevant studies at these institutions and passing the examination confer the title of fire engineer or fire technician.The second way to become a fire protection specialist is to take courses available at firefighting schools and at training centres operating at the Provincial Headquarters of the State Fire Service. The courses confer the title of fire protection specialist or fire protection inspector.The validity of the qualifications obtained is 5 years. After this period, it is necessary to update the knowledge by attending appropriate training.Depending on the school you have completed, your fire safety qualifications and the scope of activities you can carry out vary. A firefighting inspector has lower qualifications than a firefighting specialist - the former is authorised to carry out activities concerning only specific facilities, buildings and areas, while the latter can also operate in the area of a province.
[post_title] => Fire safety qualifications [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => permissions-ppoz [to_ping] => [pinged] => [post_modified] => 2014-11-20 05:52:02 [post_modified_gmt] => 2014-11-20 05:52:02 [post_content_filtered] => [post_parent] => 1253 [guid] => https://oso.edu.pl/?page_id=1269 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[92] => WP_Post Object ( [ID] => 1525 [post_author] => 3 [post_date] => 2017-12-06 12:07:07 [post_date_gmt] => 2017-12-06 12:07:07 [post_content] =>

Basic information about cranes

Overhead cranes are equipment used in materials handling. They are classified as cranes. Cranes are crane-transportation devices designed to move various loads vertically/horizontally over short distances. The operation of cranes, including overhead cranes, requires appropriate qualifications.The operation of cranes takes place in intermittent motion. The hoisting and lowering mechanism in cranes is operated by either a hoist (a traction hoist in which the mechanism assembly is built on a separate support structure, which may be a frame) or a hoist (it is compact).

The gantry cranes are made of:

  • supporting structure
  • trolley
  • the driving mechanism of the trolley
  • crane travel mechanism
  • lifting mechanism
  • electrical apparatus and installations
  • controls
  • cabins at cranes controlled from the cabin
  • safety devices
Overhead cranes are mainly used for the close transport of bulky and heavy loads.

Crane use places:

  • landfills
  • industrial halls
  • railway sidings
  • shipbuilding ramps
  • and other
To operate overhead cranes, it is necessary to have the relevant qualifications:
  • General-purpose cranes, hoists and winches
  • General and special-purpose cranes, hoists and winches
They are awarded after passing an examination before a board of the Office of Technical Inspection. Before taking the exam, an overhead crane course is recommended. It provides participants with comprehensive knowledge of how to operate the equipment and also teaches them how to operate it safely.We invite you to our crane course - the price at our training centre is very affordable, and the classes we run are focused on imparting knowledge in an active and accessible manner. This is also why we have such a high exam pass rate!We encourage you to take advantage of our offer - we also provide other UDT training courses. If you have any questions, please do not hesitate to contact us. [post_title] => Overhead crane - basic information post_excerpt] => [post_excerpt [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => basic-information [to_ping] => [pinged] => [post_modified] => 2022-09-20 10:41:09 [post_modified_gmt] => 2022-09-20 10:41:09 [post_content_filtered] =>. [post_parent] => 1523 [guid] => https://oso.edu.pl/?page_id=1525 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[93] => WP_Post Object ( [ID] => 1271 [post_author] => 3 [post_date] => 2014-11-19 18:23:37 [post_date_gmt] => 2014-11-19 18:23:37 [post_content] =>
[metaslider id=1331]
People responsible for health and safety at work are health and safety inspectors. The task of a person working in such a position is to carry out all the necessary activities to ensure that the level of occupational health and safety in the workplace is optimal.
The inspector's tasks include, among others:
  • conducting audits
  • coordination of the correctness of health and safety rules
  • constant supervision
  • conducting initial and periodic training
  • preparation of documentation, for example risk analyses
  • conducting post-accident proceedings
  • implementation of service recommendations
  • and other activities under the authority
Health and safety inspectors may be persons with appropriate education and professional experience. In order to become an inspector, one must complete at least a technical school in the relevant field or university studies in the specialization entitling to award the title.
  • inspector - completed technical secondary school in the profession
  • senior inspector - completed technical secondary school in the profession and 3 years of experience in the workplace or completed higher or postgraduate studies
Nowadays, companies do not need to employ their own health and safety specialists. External services provided by companies operating in the industry can be used. When selecting them, it is worth paying attention to their qualifications. For workplaces employing at least 100 people, it is necessary to appoint an occupational health and safety service. An authorised person in occupational health and safety is also responsible for carrying out such activities. The requirements may also be different for special hazards at the workplace. [post_title] => Health and safety inspector [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => inspector-bhp [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:43:32 [post_modified_gmt] => 2021-07-04 23:43:32 [post_content_filtered] =>. [post_parent] => 1253 [guid] => https://oso.edu.pl/?page_id=1271 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[94] => WP_Post Object ( [ID] => 1527 [post_author] => 3 [post_date] => 2017-12-06 12:10:00 [post_date_gmt] => 2017-12-06 12:10:00 [post_content] =>

Types of overhead cranes - platform, suspended, gantry

Overhead cranes are designed for the vertical/horizontal movement of loads. They are cranes operating in intermittent motion and allow loads to be transported in a space corresponding to the length of the travel path and its design.There are various types of crane in use. They are selected individually depending on the installation location and the purpose of the device. We can divide overhead travelling cranes according to several of their parameters, namely the control, the type of drive, the support structure and also the intended use.

Division of overhead cranes due to control:

  • controlled from the working level
  • remotely controlled
  • controlled from the working level or remotely
  • controlled from the cabin
  • controlled from the cabin or remotely

Classification of overhead cranes according to the type of drive:

  • overhead cranes with manual drive,
  • gantry cranes with electric drive
  • cranes with hydraulic drive
  • gantry cranes with pneumatic drive
  • mixed-drive cranes

Division of overhead cranes due to the construction of the supporting structure

  • bridge
  • gantry
  • suspended

Division of overhead cranes according to their purpose:

  • general purpose hook lifts
  • special
Overhead cranes are therefore selected according to their purpose. For example, bridge or overhead travelling cranes, electrically powered and controlled remotely or from the working level, are used in industrial halls. Gantry cranes, on the other hand, are most often used on railway sidings or in shipyards.Persons operating overhead travelling cranes must have the relevant UDT qualifications. For this purpose, UDT training is provided, followed by an examination.We invite you to take UDT courses for cranes at our OSO Operator Training Centre! [post_title] => Types of cranes - breakdown [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => crane types [to_ping] => [pinged] => [post_modified] => 2022-09-20 10:40:49 [post_modified_gmt] => 2022-09-20 10:40:49 [post_content_filtered] => [post_parent] => 1523 [guid] => https://oso.edu.pl/?page_id=1527 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[95] => WP_Post Object ( [ID] => 1273 [post_author] => 3 [post_date] => 2014-11-19 18:24:13 [post_date_gmt] => 2014-11-19 18:24:13 [post_content] =>
[metaslider id=1338]
Apart from occupational health and safety inspectors, another type of title in this specialization is an occupational health and safety specialist. Persons with appropriate education and, additionally, professional experience can become one.
Below are the current requirements:
  • specialist - higher education in the field or postgraduate studies, at least 1 year of internship
  • senior specialist - higher education in a given field of study or specialization, postgraduate studies, at least 3 years of internship
  • main specialist - higher education in a given field of study or specialization, postgraduate studies, at least 5 years of internship
Among the tasks of an occupational health and safety specialist are inspecting working conditions in the company, drawing up documents such as occupational risk assessments, preparing procedures, conducting initial and periodic training, conducting post-accident investigations, cooperating with authorities responsible for inspecting the state of occupational health and safety and others in accordance with laws and regulations relating to the profession.In companies that need the services of an occupational health and safety specialist, it is not necessary to employ a qualified person. It is possible to cooperate with external service providers carrying out the necessary activities. This is a more cost-effective solution and ensures a high level of service at the workplace. When selecting a suitable service provider, it is advisable to find out their qualifications and the scope of the service offered, as well as their professional experience.
[post_title] => Occupational health and safety specialist [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => specialist-bhp [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:50:18 [post_modified_gmt] => 2021-07-04 23:50:18 [post_content_filtered] => [post_content_filtered] => [post_parent] => 1253 [guid] => https://oso.edu.pl/?page_id=1273 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[96] => WP_Post Object ( [ID] => 1529 [post_author] => 3 [post_date] => 2017-12-06 12:11:55 [post_date_gmt] => 2017-12-06 12:11:55 [post_content] =>

Crane service. What should the gantry crane remember?

An overhead crane is a piece of equipment that can only be operated by a person with the relevant UDT licence. His or her task is to properly prepare the equipment for operation and to carry out the work, as well as to carry out the appropriate post-operation activities.Precise information on the operation of cranes can be found in the Health and Safety Manual - the employer is obliged to provide this manual to the employee, who should familiarise himself with its provisions. What are the general notes on the operation of cranes in the Health and Safety Manual?

An employee may commence working with a gantry crane:

  • with appropriate training in occupational health and safety and fire protection
  • with the appropriate qualifications for overhead cranes granted by the Office of Technical Inspection
  • in good health, as confirmed by a certificate issued by an occupational medicine physician
  • in appropriate work clothing without loose elements, in appropriate work shoes and personal protective equipment such as a protective helmet, protective gloves

Before starting work, the crane operator should carry out all the necessary preparatory activities:

  • getting acquainted with the entries in the operation book (handover or service book)
  • checking the vicinity of the device for safety
  • getting to know the loads to be transported and preparing a safe place for their storage
  • agreement with the hook system of communication with the use of signals and symbols
  • daily inspection of the device and its test drive
  • making a proper entry in the operation book (handover or service)
The tasks entrusted to the crane operator should be performed in accordance with the rules and regulations as well as the supervisor's recommendations so that they do not pose a threat.

Activities prohibited while working with the gantry crane:

  • work on the device without a valid UDT decision, the device is inoperative or incomplete, for example with incorrect or damaged slings
  • performing work under the influence of alcohol or drugs
  • lifting loads with a weight greater than the permissible lifting capacity of the crane
  • lifting loads out of range of the device
  • lifting loads that are welded, bolted or frozen to the ground
  • transportation of loads carrying people, over people or over their workstations
  • leaving the load entrusted to the device
  • maintenance of the device during its operation and carrying out unauthorized repairs or adjustments
These are only selected recommendations. Exact information will be found in the Health and Safety Manual.Take a crane course at our Operator Training Centre - get your crane licence with us! [post_title] => Crane operation - general health and safety notes [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => crane service [to_ping] => [pinged] => [post_modified] => 2022-09-20 10:40:39 [post_modified_gmt] => 2022-09-20 10:40:39 [post_content_filtered] =>. [post_parent] => 1523 [guid] => https://oso.edu.pl/?page_id=1529 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[97] => WP_Post Object ( [ID] => 1275 [post_author] => 3 [post_date] => 2014-11-19 18:24:51 [post_date_gmt] => 2014-11-19 18:24:51 [post_content] =>
Fire protection inspectors and specialists have the appropriate powers to conduct fire protection activities in buildings, facilities and areas, including workplaces. The qualifications are obtained by graduating from the appropriate school.A fire specialist may be a graduate of:
  • fire-fighting training centres
  • fire schools operating at Voivodeship Headquarters of the State Fire Service
  • Main School of Fire Service in Warsaw
  • Aspirants' Schools of the State Fire Service in Kraków or Poznań
  • Central School of the State Fire Service in Częstochowa
A fire protection specialist is authorized to conduct fire protection activities in communes, poviats and provinces. His powers are wider than that of inspectors.People working in this position have competences in the following areas:
  • they can organize fire protection
  • they know the rules of fire protection
  • are able to precisely recognize and assess threats
  • they know the fire requirements
  • they know the measures used during fires and other hazards
  • have the ability to create appropriate organizational, formal and legal conditions for the safety of property and people
When starting to work with a specialist in the aforementioned field, it is worthwhile to familiarise yourself with their qualifications and experience. By choosing our services, you can be sure that you will receive comprehensive care regarding fire protection in your company. You are welcome!
[post_title] => fire safety specialist [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => specialist-ppoz [to_ping] => [pinged] => [post_modified] => 2022-06-28 19:43:20 [post_modified_gmt] => 2022-06-28 19:43:20 [post_content_filtered] =>. [post_parent] => 1253 [guid] => https://oso.edu.pl/?page_id=1275 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[98] => WP_Post Object ( [ID] => 1531 [post_author] => 3 [post_date] => 2017-12-06 12:12:53 [post_date_gmt] => 2017-12-06 12:12:53 [post_content] =>

Crane operation - how to proceed in dangerous situations?

[metaslider id=1627]
The crane operator must be authorised by the Technical Inspection Authority (UDT). When working, he or she must comply with health and safety rules to reduce the risk of dangerous situations affecting his or her own health and the health and lives of others.However, not all such situations can be prevented. What should the crane operator do then?

We can divide dangerous situations into three categories:

  • Emergency situations
  • the occurrence of an accident
  • fire
Breakdowns when working with an overhead crane can happen frequently, especially with older equipment. If the operator notices a malfunction, he should stop work immediately and report it to his supervisor. Work can only continue when the hazard has been removed and after the equipment has been re-inspected. The operator must not attempt to repair faults himself!When an accident occurs, the first thing to do is to secure the scene and provide first aid to the injured. If necessary, medical assistance must be summoned. The crane operator's superiors should be notified of the accident.When a fire occurs in the working area of the crane, it is the operator's responsibility to warn people in the danger area. The power and gas supply to the building and the crane should be cut off. You can attempt to extinguish the fire yourself with an extinguisher if the fire is not large. For larger fires, call the fire brigade as soon as possible. Supervisors should be informed of the incident. If necessary, an evacuation should be ordered.If there is any doubt about the safety of the crane, the operator may stop work and speak to a supervisor.We invite you to attend an overhead crane course at OSO - together with us you will gain your UDT licence for overhead cranes. Choose UDT courses from the best! [post_title] => Dangerous situations when operating an overhead crane [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => dangerous-situations [to_ping] => [pinged] => [post_modified] => 2022-09-20 10:41:20 [post_modified_gmt] => 2022-09-20 10:41:20 [post_content_filtered] =>. [post_parent] => 1523 [guid] => https://oso.edu.pl/?page_id=1531 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[99] => WP_Post Object ( [ID] => 1277 [post_author] => 3 [post_date] => 2014-11-19 18:27:18 [post_date_gmt] => 2014-11-19 18:27:18 [post_content] =>
[metaslider id=1337]
Machine certification has become an obligation since Poland joined the European Union. According to the regulations, machines are defined as assemblies that have a drive other than the force of human or animal muscles. These assemblies must consist of interconnected components, some of which must be set in motion.The following are subject to certification:
  • machinery
  • spare equipment for machines
  • safety parts
  • chains, belts and ropes
  • machine equipment
  • parts removable from machinery, including mechanical transmission
  • unfinished machines
The following are not subject to certification:
  • weapon
  • machines developed for the needs of the military and police
  • machines used for research purposes
  • machinery used for nuclear purposes
  • means of rail transport
  • means of water transport
  • means of air transport
  • mining hoisting equipment
Regulations:
  • Machinery Directive 2006/42/EC
  • Low Voltage Directive 2006/95 / EC
  • 2004/108 / EC Electromagnetic Compatibility Directive
  • ATEX directive 94/9WE - explosion area
  • Regulation of the Minister of Economy of 21. 10. 2008 on the essential requirements for machines (Journal of Laws of 2008, No. 199, item 1228)
  • Regulation of the Minister of Economy of 13. June 2011 amending the regulation on essential requirements for machines (Journal of Laws No. 124 item 701)
It is worth entrusting certification activities to experts in this field. Our company provides a professional service for machine certification throughout Poland. We invite you to choose our services!
[post_title] => Machinery certification regulations [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => regulations-for-certification-machines [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:49:11 [post_modified_gmt] => 2021-07-04 23:49:11 [post_content_filtered] =>. [post_parent] => 1253 [guid] => https://oso.edu.pl/?page_id=1277 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[100] => WP_Post Object ( [ID] => 1533 [post_author] => 3 [post_date] => 2017-12-06 12:15:28 [post_date_gmt] => 2017-12-06 12:15:28 [post_content] =>

UDT exam for overhead cranes - course, sample questions

In order to work with overhead cranes, it is necessary to complete the relevant overhead crane course and to obtain an UDT licence to operate this type of equipment. The training provides participants with comprehensive knowledge about working with cranes. After this preparation, you can take the exam - if you pass the exam, you will be qualified to operate cranes.Rules on how to conduct examinations for operators of handling equipment:

Theoretical exam (oral):

  • The duration of the theory test: maximum 1 hour.
  • The examination questions are divided into sets. The allocation criterion is the category of allowances.
  • During the examination, committee members ask the examiner 5 questions, including 2 general questions and 3 for a given type and scope of qualifications.
  • The result of the exam is positive if the candidate answers correctly at least 1 question in the general part and 2 questions in a given category of qualifications.

Practical exam:

  • Duration of the practical test: maximum 1 hour.
  • During the practical examination, the members of the commission determine the examiner a practical task to be performed.
  • The exam result is positive if the examined person carries out all the maintenance activities correctly.

During the theory test, the examining board asks questions in the following categories:

  • knowledge of legal regulations in the field of device operation
  • the types of handling equipment covered by the scope of the authorization
  • device construction and device mechanisms
  • load capacity (load characteristics)
  • electrical, hydraulic and pneumatic equipment
  • knowledge of the operating manual in the field of operation
  • dangerous damage and accident - procedure to follow
  • cooperation with hook and whistleblowers
  • work in specific conditions
  • conditions for safe work when operating devices

Sample questions during the UDT exam for gantry qualifications:

  • What are the categories of crane licenses and what do they contain?
  • What types of cranes are there?
  • What are the most important technical data of the cranes?
  • What elements is the crane made of?
  • What is the division of steel ropes in overhead cranes?
  • What safety devices are used in cranes?
  • How should you behave in the event of damage to the crane?
  • What activities cannot be performed while working with the crane?
[post_title] => UDT exam for cranes - questions [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => exam [to_ping] => [pinged] => [post_modified] => 2022-09-20 10:40:20 [post_modified_gmt] => 2022-09-20 10:40:20 [post_content_filtered] =>. [post_parent] => 1523 [guid] => https://oso.edu.pl/?page_id=1533 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[101] => WP_Post Object ( [ID] => 1279 [post_author] => 3 [post_date] => 2014-11-19 18:31:27 [post_date_gmt] => 2014-11-19 18:31:27 [post_content] =>
[metaslider id=1340]
Machine - an assembly powered by a drive other than that of animal or human musclesActivation of protective equipment - the starting time of the protective equipment operation when motion is detectedRisk analysis - identification of hazardous personsSecurity - no riskComplete system halt - the machine stops workingAccess time - time to reach the components of the hazardous machineAccess frequency - number of actions to access the protection zone per unit of timeDefect - the inability to perform the function by the object, does not include maintenance and planned repairs; Hazardous Defect - Hazardous Defect; a defect that does not change the security status - a defect that does not affect the security statusSafety features:
  • basic - disturbance causes danger
  • unconditional - they provide security
  • conditional - do not apply to the safety function
  • indirect - interference does not cause immediate danger, but reduces its level
Electro-sensitive protective equipment (EWO) - self-protection components, sensing, control and monitoring equipment switching input signalsSafety-related elements of control systems - they emit input signalsSafety functions of control systems - are responsible for the safety of the machineFunction endangering the machine - function causing the threatUsage Information - security measures, including signs, symbols, graphs, inscriptionsIsolating and dissipating energy - disconnecting the machine, closing insulated components, dissipating or holding back energy, checking the effectiveness of the procedureCategory - fragmentation of safety control system componentsPosition switch - it is acted on by a moving element of the machineReliability - the ability of the machine to work without failure in specific conditions and periodsRisk assessment - includes economic, environmental and social factorsSafety distance - the distance between the protection zone and the danger zoneOperator - a person performing installation, maintenance, repair works and operating the machineCover - the protective part of the machine; permanent cover - permanently connected to a given place; movable cover - can be removable; adjustable guard - has an adjustable position; locking cover - equipped with locking parts; control guard - equipped with blocking parts that prevent operation when the guard is not closedSusceptibility to repair and maintenance - adjusting the machine to return to safe working conditionReasonably foreseeable misuse - use of the machine in conditions unsuitable for thisRedundancy - using a different machine, part or system after a failure to ensure the continuity of workReset - restoration of safety functionsRisk - the chance of the damage and its severity; tolerated risk - accepted in certain circumstancesSelf-supervision - supervision that automatically enables safety measures in the event of a reduction in the ability of a part to perform its functionZone dangerous - causes exposure to injuriesSituation threats - causes exposure to threatsPity - damage to health, property or environmental degradationMeans safety - intended to reduce the risk and achieve a tolerable riskMeans protective - necessary to protect people from dangers that cannot be completely eliminatedActivation machinery - starting operation of the machine or its element; unexpected start-up - caused by damage, power return, improper action on the control element, impact of the machine, engine self-ignitionDevice blocking - prevents the machine element from workingDevice protective - reduces the riskDevice supervising run - transmits a signal preventing the next switching on of the machineSelf-acting distance device - switches off the machine or its elements when entering the protection zoneLimiting device - prevents the device from exceeding the partition valuesMechanical restraining device - having a mechanical barrierLocking device - closing the machine guardSupported control device - in operation until the control element is actuatedTwo-hand control devices - requires the use of two handsStep control devices - they allow you to work only in a given part of the roomDevices that restrict access - are physically limited to the danger zoneEnabling control devices - when started manually, it enables workDamage - the machine is not able to workUsing the machine as intended - proper use of the machineDanger - puts you at risk of injurySuspension - suspension of the safety functions while the machine is runningHappening harmful - takes place if the emergency turns into a damageDetection Ability - sensitivity parameter enabling the protective equipment
[post_title] => Dictionary of machine safety [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => dictionary-safety-machines [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:49:45 [post_modified_gmt] => 2021-07-04 23:49:45 [post_content_filtered] => [post_parent] => 1253 [guid] => https://oso.edu.pl/?page_id=1279 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[102] => WP_Post Object ( [ID] => 7 [post_author] => 3 [post_date] => 2014-10-07 15:31:39 [post_date_gmt] => 2014-10-07 15:31:39 [post_content] =>
[metaslider id=372]
The OSO Centre are experts at your service throughout Poland - for more than 15 years our OSO Operator Training Centre has been educating, advising, auditing and assisting companies. In particular, we specialise in training - UDT, ADR, also fire-fighting, occupational health and safety and first aid. We have also been providing outsourced HSE and fire safety services for over 20 years. We invite all those who need professional support to use our services!We have many years' experience in training - we have been educating, auditing and advising companies for more than 15 years. We have the best specialists working for us, and we also cooperate with a number of authorisation bodies. We are committed to ensuring that each and every one of our customers is completely satisfied - we hope that we can meet your requirements too.Service experts Our Center is made up of experts with many years of experience in the profession. It is thanks to them that we can offer training services at such a high level. We prepare curricula together with qualified methodologists and institutions granting authorizations, which makes them comprehensively prepare for exams. We provide support not only in training, but also in providing health and safety services for companies. With us, you can be sure that your business is in the best hands.A science tailored to your needs We focus on providing professional courses - we train employers and employees, individuals and organised groups. It is with us that you can order a health and safety course, fire training or a first aid course and receive comprehensive and professional support throughout Poland. Our centres are located in the cities of: Warsaw, Krakow, Katowice, Bielsko-Biala, where fully-equipped classrooms await course participants, but we are also able to travel to our clients to the designated place. In the case of closed groups, we can individually adjust the thematic scope of classes to the client's needs. With us, learning is the ultimate comfort!
[metaslider id=373]
Why is it worth choosing the OSO Operator Training Center?
  • we offer a wide range of training and services
  • We approach each customer individually
  • we provide affordable prices
  • qualified instructors and specialists work for us
  • we have modern facilities
Our headquarters are in Warsaw, but we also provide services in other locations throughout the country.If you have any questions about our services, please contact us - we will provide all the necessary information and prepare an individual offer. The OSO Operator Training Centre invites you to make use of its services!Low prices and additional discounts In doing so, we place emphasis on affordable prices. That is why we have developed our own pricing strategy so that, whether training for a few or for a dozen people, the fees are encouraging. We apply discounts for larger groups, but even one person will not overpay at our Centre. We also allow you to negotiate prices.If you have any questions, we are always available. If you would like to make use of our services, please visit our website!
[post_title] => About the company [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => about-company [to_ping] => [pinged] => [post_modified] => 2022-05-31 09:52:08 [post_modified_gmt] => 2022-05-31 09:52:08 [post_content_filtered] =>. [post_parent] => 0 [guid] => https://oso.edu.pl/?page_id=7 [menu_order] => 1 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[103] => WP_Post Object ( [ID] => 22 [post_author] => 3 [post_date] => 2014-10-07 16:01:41 [post_date_gmt] => 2014-10-07 16:01:41 [post_content] =>

Training at the OSO Center

[metaslider id=388]
Training offerWe put at your disposal a full range of vocational and complementary training necessary for your jobs. At the OSO Centre you are assured of quality and low prices! As an establishment with several years of experience, we know how to teach so that it is effective, not only for the purpose of obtaining certificates, but also to help you in your everyday tasks.Our services are aimed both at companies and institutions wishing to train their employees and others, and at individual customers in the form of open classes - available to anyone interested. We organise closed classes in our head office in Warsaw and in our field branches in Katowice, Kraków and Bielsko-Biała. We are also able to travel to our clients to deliver the service at a designated location throughout the country.We would like to remind you that training in occupational health and safety for employees, as well as in fire-fighting and first aid, is the employer's responsibility. By choosing our offer, you can be sure that this obligation will be fulfilled by specialists in their field.Our offer includes mainly:
  • OHS training for employers and employees - initial and periodic for all positions
  • first aid course - for anyone wishing to improve their knowledge and skills
  • fire protection course - teaching how to deal with fires and how to prevent them
  • and other courses that can be found on our websites
Our aim is to provide customers with access to quality education - all our courses are a guarantee that you and your employees will be comprehensively educated and certified. We emphasise modern activity-based methods and our experienced instructors oversee the course of each class.In addition to our training offer, our speciality is the outsourcing of services:
  • health and safety services for companies - health and safety training, supervision, auditing and other health and safety services
  • fire-fighting service as fire-fighting inspector, fire-fighting expert)
We have more than 20 years' experience in services of this kind. We always take an individual approach to each of our clients, wanting their satisfaction with our work to be optimal. We will tailor the scope of the work and ensure that it is carried out in a timely and professional manner.In addition, what sets us apart is our affordable price for our services - this is dependent on the number of people involved and individual arrangements. We know that for many of our clients it is low fees that are key, so we try to accommodate these needs.We hope our offer has piqued your interest - find out more about our services on the OSO Centre website!
[post_title] => Training [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => training [to_ping] => [pinged] => [post_modified] => 2022-07-07 21:59:37 [post_modified_gmt] => 2022-07-07 21:59:37 [post_content_filtered] =>. [post_parent] => 0 [guid] => https://oso.edu.pl/?page_id=22 [menu_order] => 2 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[104] => WP_Post Object ( [ID] => 1542 [post_author] => 3 [post_date] => 2017-12-06 13:43:22 [post_date_gmt] => 2017-12-06 13:43:22 [post_content] => Do you want to obtain a licence for the operation and supervision of electrical, heat or gas equipment, installations and networks? Then come along to our courses for authorisations in the categories G1, G2, G3 to CSO! We offer comprehensive and professional training in the above-mentioned categories which prepares the trainee for the examination before the commission of his/her choice, e.g: SEP, PSE, SIMP, SITPS. Many years of experience, modern training methods, reasonable prices and high pass rates are the main advantages of our offer. Sign up for a course! [post_title] => G1, G2, G3 course [post_excerpt] =>. [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => course-sep [to_ping] => [pinged] => [post_modified] => 2022-06-13 09:26:07 [post_modified_gmt] => 2022-06-13 09:26:07 [post_content_filtered] =>. [post_parent] => 0 [guid] => https://oso.edu.pl/?page_id=1542 [menu_order] => 3 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[105] => WP_Post Object ( [ID] => 37 [post_author] => 3 [post_date] => 2014-10-07 16:20:56 [post_date_gmt] => 2014-10-07 16:20:56 [post_content] =>

Health and safety courses

For anyone interested, our OSO Operator Training Centre has prepared an attractive range of courses in occupational health and safety. Our occupational health and safety courses are aimed at anyone looking for quality at affordable prices!Current legislation requires employers to provide occupational health and safety classes. These include both periodic health and safety training courses and initial training courses. During these, participants learn how to act at their workplace in order to do their job safely and reduce the risk of hazards and accidents. This is compulsory knowledge regardless of the position and job profile, which is why every newly recruited employee should take part in this type of training. Thanks to our Centre, this is even easier, because by choosing us, you can be sure that they will be carried out by experts in their field and at a low price.

Our offer

[metaslider id=408]
We conduct initial occupational health and safety training, i.e. for employees hired to work, as well as apprentice students and students of vocational schools on apprenticeships, as well as periodic ones, the purpose of which is to update and expand knowledge at the workplace. These are classes aimed at employees as well as employers and people in managerial positions. Below we present the applicable legal requirements in the field of occupational health and safety in accordance with par. 14, 15 of the Regulation of the Minister of Economy and Labor of 27 July 2004 on training in the field of occupational safety and health (Journal of Laws No. 180, item 1860, as amended).Initial OHS training:
  • for new employees in blue-collar, administrative and office, engineering and technical positions - valid for 1 year
  • for new hires managing employees, for managerial positions - valid for 6 months
Periodic OHS training:
  • for people in administrative and office positions - valid for 6 years
  • for people in engineering and technical positions - valid for 5 years
  • for workers in blue-collar positions - valid for 3 years
  • for people and people managing employees - valid for 5 years
  • for manual, engineering and managerial staff carrying out particularly hazardous work - valid for 1 year or 6 months depending on the occupational risk
  • for health and safety service people - the first 12 months after graduation, then every 5 years

Topics of classes

Both initial and periodic health and safety training for employers and health and safety training for employees consist of information tailored to the scope of work. Each initial health and safety course consists of general instruction, which familiarises participants with health and safety regulations, as well as job-specific instruction tailored individually to the work to be performed and showing how to carry out the work safely. The periodic safety and health training course incorporates the information from the initial class, updating and extending it to remind the employee of the most important safety rules applicable to his or her job.So, at our Centre, each periodic OSH training and initial training course is selected for its subject matter for the specific job. This ensures that employees are trained comprehensively and know how to act in order to work safely.We are also able to incorporate additional elements as part of the curriculum according to the clients' requirements. Such an option is available for closed classes for organised groups. Please contact us if you would like this service.Where do we operate Our services are available in the cities of: Warsaw, Krakow, Bielsko-Biala and Katowice. In our branches, classes are conducted non-stop according to the schedule presented on the website. We can also travel to clients throughout Poland.Guarantee of low prices At our Centre, we are committed to low prices for our services - by choosing our health and safety training, you can be sure that you are not overpaying. Our price list is flexible, the final costs depend on the number of participants in the classes - in case of a larger number we are able to provide attractive discounts. We have included a list of indicative prices on our website, so please feel free to take a look at it and also contact our staff for a personalised quote.Initial and periodic training in occupational health and safety - Warsaw, Krakow, Katowice, Bielsko-Biała and the whole of Poland - welcome!
[post_title] => Occupational health and safety training courses [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => bhp [to_ping] => [pinged] => [post_modified] => 2022-07-07 22:06:09 [post_modified_gmt] => 2022-07-07 22:06:09 [post_content_filtered] => [post_parent] => 22 [guid] => https://oso.edu.pl/?page_id=37 [menu_order] => 3 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[106] => WP_Post Object ( [ID] => 1139 [post_author] => 3 [post_date] => 2014-11-12 15:03:26 [post_date_gmt] => 2014-11-12 15:03:26 [post_content] =>
[metaslider id=1357]
We offer a health and safety service to business clients. We know how important it is to provide a professional and comprehensive health and safety service, which is why we only deliver services of a high standard, while making sure they are as affordable as possible.We operate on an outsourced basis, delivering our services to clients across the country. Thanks to us, you no longer need to employ your own specialists, as we are completely at your disposal. You can be sure that the state of health and safety in your establishment will be properly looked after.Our offer We provide access to comprehensive health and safety services. Due to the fact that professionals in this field work for us, we can provide services at the highest level, always tailored to the client's needs, and at the same time without overpaying. We provide services to both small businesses, including self-employed people, and large corporations for which we provide a full range of services.Health and safety services at our Center include in particular: - full service of occupational health and safety of companies - supervision of occupational health and safety, initial and periodic training, record keeping - development of occupational risk assessments using various methodologies - conducting post-accident investigations - audit of occupational health and safety - occupational health and safety management according to PN-N-18001 and OHSAS 18001 standards - environmental examinations - workplace measurements - psychosocial risk assessment - evaluation of workplaces for the disabled - ergonomic assessment - certification of machineryWhy choose outsourcing? At our Centre, we offer health and safety outsourcing - this is currently the most popular way of servicing companies in this area. Our health and safety specialist will make sure that the health and safety situation in your company is at the right level. Today, health and safety companies, such as our Centre, are able to provide their clients with comprehensive solutions without having to employ a responsible person.We would like to remind you that the obligation of training, keeping correct records and other necessary activities applies to every person running a business. Our outsourced health and safety company means reduced costs and the certainty that all work will be carried out on time and correctly.Experts at your service At the OSO Centre, a specialist and a health and safety inspector are available to you. We have more than 20 years of experience in this particular field, which means that we provide our customers with professional and individually tailored support. We have the necessary qualifications in occupational health and safety, in addition to which we constantly undergo further training - we keep up with changes in the law, take part in conferences and seminars, because we know how important customer satisfaction is and at the same time our satisfaction with it.Where we work You can choose our health and safety services in the following cities: Warsaw, Kraków, Katowice and Bielsko-Biała. Our branches are located in these places, so we can reach you directly. We also serve clients from nearby towns and from all over Poland - please contact us for information on outbound services.Price list Anyone who appreciates low fees will certainly be pleased with our price list. The price of the service is always individually selected depending on the scope of activities, so please contact us via the quotation form. Our staff will prepare a quote and send it as soon as possible. With us, you do not pay for services you have not ordered!Adequate occupational health and safety should be a priority for every employer. Reducing the number of hazards and accidents at work means better working comfort and higher employee productivity. With us, you can be sure that all documents will be filled out correctly, your employees will be trained and you can forget about formalities and focus on developing your business.Comprehensive and professional occupational health and safety services: Warsaw, Krakow, Katowice and Bielsko-Biala - we encourage you to work with us!
[post_title] => Occupational health and safety services [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => services-bhp [to_ping] => [pinged] => [post_modified] => 2014-11-20 05:54:40 [post_modified_gmt] => 2014-11-20 05:54:40 [post_content_filtered] => [post_parent] => 0 [guid] => https://oso.edu.pl/?page_id=1139 [menu_order] => 3 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[107] => WP_Post Object ( [ID] => 1251 [post_author] => 3 [post_date] => 2014-11-19 18:16:26 [post_date_gmt] => 2014-11-19 18:16:26 [post_content] =>
[metaslider id=519]
The correct implementation of OSH and fire safety guidelines at workplaces can significantly reduce the risk of accidents and occupational diseases, as well as other unforeseen situations. We offer a full service at low prices to all those who want their company to operate reliably in this respect! It is the responsibility of the employer, the owner of a building, facility or site to provide security at an appropriate level. With us, you can get professional support in this regard. We will make sure that security is always of a high standard, without costing you a lot.

Our offer

Our services include, in particular:
  • initial and periodic training in occupational health and safety and fire protection for employees and employers in all workplaces
  • professional consultancy for companies
  • fire protection of buildings - proper marking and arrangement of equipment
  • specialist services - fire protection expert, fire protection inspector
  • preparation of documentation - fire safety instruction (general fire instruction) and others
  • preparing buildings for collection by the State Fire Service
  • services of inspection, repair, maintenance of fire extinguishing devices and signaling installations
  • and other types of services in the field presented
The details of our services can be found below:Fire protection inspector, otherwise fire protection inspector - a person responsible for the implementation of activities related to fire protection of buildings and evacuation.Fire protection appraiser - a person responsible for preparing expert opinions, analyzes and opinions in the field of fire protection. In order to work as an appraiser, it is necessary to obtain appropriate training and additionally pass an exam.Fire protection - thanks to it, it is possible to effectively prevent and, if necessary, fight fires. As part of it, activities such as preventing fires and their spread are carried out, including fire protection instructions, OHS and fire protection training, provision of appropriate fire fighting measures and rescue activities. Fire protection for buildings should be developed by a specialist in their field to reflect the situation as closely as possible.Fire safety instruction, too fire instructions, general fire instructions - a document that each building, facility or area must have in accordance with the ordinance of the Minister of Interior and Administration of June 7, 2010 (Journal of Laws No. 109, item 719). The document contains, inter alia, information on the conditions of fire protection, inspections and maintenance activities, methods of conduct in the event of a fire hazard and its occurrence, evacuation of the population.

Where we work

We provide services throughout the country. Our branches, where you can also get help locally, are located in Warsaw, Krakow, Katowice and Bielsko-Biała. We also reach our clients, providing full service.

Prices

The costs of the service depend on the scope of the activities carried out. They are always determined individually, so please contact us for a quote. Affordable prices distinguish us, and prices can be negotiated.Should you have any questions regarding the implementation of our services, we will be happy to answer them. We are available on the telephone numbers indicated, as well as via e-mail. Please also feel free to contact us to discuss a quote for services.If you need a fire protection inspector, we are always available - please feel free to use our services!
[post_title] => Fire Protection Services [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => services-poz [to_ping] => [pinged] => [post_modified] => 2021-07-04 23:42:02 [post_modified_gmt] => 2021-07-04 23:42:02 [post_content_filtered] => [post_content_filtered] => [post_parent] => 0 [guid] => https://oso.edu.pl/?page_id=1251 [menu_order] => 4 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[108] => WP_Post Object ( [ID] => 1253 [post_author] => 3 [post_date] => 2014-11-19 18:17:03 [post_date_gmt] => 2014-11-19 18:17:03 [post_content] =>

Health and Safety

Inspector
 
Recipes
 
Specialist (appraiser)
 
Entitlements
 
Requirements
 

Fire protection

Recipes
 
Entitlements
 
Requirements
 

First aid

Recipes
 
Requirements
 
[post_title] => Knowledge base [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => knowledge-base [to_ping] => [pinged] => [post_modified] => 2022-06-14 08:46:16 [post_modified_gmt] => 2022-06-14 08:46:16 [post_content_filtered] =>. [post_parent] => 0 [guid] => https://oso.edu.pl/?page_id=1253 [menu_order] => 5 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[109] => WP_Post Object ( [ID] => 87 [post_author] => 3 [post_date] => 2014-10-07 17:18:03 [post_date_gmt] => 2014-10-07 17:18:03 [post_content] => Anyone interested in using the services of our OSO Operator Training Centre is encouraged to contact us with any questions - our staff are always available to present our offer, prepare a quote and point out the best solutions. We try to answer questions as quickly as possible!
OSO Operators Training Centre 8 Królów Polskich Street 02-496 Warsaw +48 504 477 077
[post_title] => Contact [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => contact [to_ping] => [pinged] => [post_modified] => 2023-04-25 19:43:45 [post_modified_gmt] => 2023-04-25 17:43:45 [post_content_filtered] =>. [post_parent] => 0 [guid] => https://oso.edu.pl/?page_id=87 [menu_order] => 100 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw ))[post_count] => 110 [current_post] => -1 [before_loop] => 1 [in_the_loop] => 1 [post] => WP_Post Object ( [ID] => 2823 [post_author] => 6 [post_date] => 2023-03-21 17:42:20 [post_date_gmt] => 2023-03-21 16:42:20 [post_content] =>

Become a mobile crane operator 

mobile crane on the road

OSO Operator Training Centre is a company that has been providing training and courses for employees working with large-scale equipment for years. Our courses offer instruction in controlling overhead cranes, forklifts, hoists, cranes and many other machines. We provide comprehensive classes with some of the most qualified professionals. 

General overview of the training 

The courses are based on standards that comply with the law, i.e. the requirements of the UDT. Training is conducted in a friendly atmosphere by some of the best specialists in the field. The basic idea is to prepare the trainees not only for their daily duties, but also for the challenges associated with the specifics of the profession.

The training consists of both theoretical and practical parts. It includes classes on: 

  • types of cranes,  
  • health and safety regulations, 
  • mechanical engineering, 
  • lifting tasks, 
  • the rules for transporting the different types of material, 
  • equipment maintenance. 

In order to obtain an operator's licence, it is required to pass a special examination before a board consisting of representatives of the Office of Technical Inspection.   

Crane - what does it mean?  

mobile crane at work

Cranes include a wide group of machines, also functioning under the name of crane equipment, whose task is to move materials and bulky goods. Of course, cranes vary in type, so loads can be moved by platforms as well as by various types of hoists or jacks. Cranes, like many other similar machines, are subject to the Office of Technical Inspection, so a licence is needed to operate them.  

Requirements for those interested in the course  

To join the course you must:   

  • be of legal age,   
  • obtain a certificate from a doctor that there are no contraindications to practising the profession,  
  • have at least a primary school education. 

Location of training 

Training courses are held both in Warsaw at our central location and in branches located in cities throughout Poland. If the client expresses an interest, we are ready to carry out the classes with travel to the client. The course can take the form of both a closed course - intended for the whole company - and an open one, in which everyone can take part individually.  

The current price list and schedule are available on our website. However, the price is dependent on the interest in a particular course. 

Why us? 

mobile crane with hook

By completing our training course, you can easily obtain a position as a mobile crane operator. The graduate of our course should be able to handle the equipment without any problems. The skills acquired during the course should also provide a solid basis for expanding your knowledge when working with other heavy equipment as well. 

Post-course work  

Once all the necessary documents and licences have been acquired, the trainee should have no problem finding a job in any industry that uses cranes. These machines are primarily used to move material and tools, so they are very often used at construction sites of all kinds. They are also useful in factories and production halls, as well as warehouses. They are also used in transport and heavy industry, such as shipyards. Some cranes are also used in marketing (hanging advertisements), telecommunications and tree felling.  

QUESTIONS FROM STUDENTS

Our training courses consist of both theoretical and practical parts. The classes comprehensively prepare you to operate the equipment in question.  

No. Participants in the course do not need to have more than a primary school education. Instead, they must be of legal age and have the appropriate medical certificate. 

[post_title] => Mobile crane training - cranes [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => training-from-operating-a-crane-crane [to_ping] => [pinged] => [post_modified] => 2023-03-22 15:32:06 [post_modified_gmt] => 2023-03-22 14:32:06 [post_content_filtered] =>. [post_parent] => 1739 [guid] => https://oso.edu.pl/?page_id=2823 [menu_order] => 0 [post_type] => page [post_mime_type] => [comment_count] => 0 [filter] => raw )[comment_count] => 0 [current_comment] => -1 [found_posts] => 110 [max_num_pages] => 0 [max_num_comment_pages] => 0 [is_single] => [is_preview] => [is_page] => [is_archive] => [is_date] => [is_year] => [is_month] => [is_day] => [is_time] => [is_author] => [is_category] => [is_tag] => [is_tax] => [is_search] => [is_feed] => [is_comment_feed] => [is_trackback] => [is_home] => 1 [is_privacy_policy] => [is_404] => [is_embed] => [is_paged] => [is_admin] => [is_attachment] => [is_singular] => [is_robots] => [is_favicon] => [is_posts_page] => [is_post_type_archive] => [is_post_type_archive] => [query_vars_hash:WP_Query:private] => 207fb163f8692996af8469eb3a73bd9f [query_vars_changed:WP_Query:private] => [thumbnails_cached] => [allow_query_attachment_by_filename:protected] =>. [stopwords:WP_Query:private] => [stopwords:WP_Query:private] => [compat_fields:WP_Query:private] => Array ( [0] => query_vars_hash [1] => query_vars_changed )[compat_methods:WP_Query:private] => Array ( [0] => init_query_flags [1] => parse_tax_query ))
Mobile crane training - cranes
Permissions G1, G2, G3 - sign up for the course at the SPA!
G1 course - get qualifications with us!
G2 course - sign up now!
G3 training - get authorization from SPA!
List of certification committees for G1, G2, G3 exams
Course for mobile platforms - get UDT qualifications!
Permissions G1-G2-G3 - supervision and operation
Repair and maintenance of UDT machines
Building access course
Sale of UDT machines
Oxy-acetylene torch cutting course 
Welding
Global Wind Organization
Get qualified to weld fiber optics
(WAH) Working at Heights - Warsaw and entire Poland
Manual soldering for beginners
 Operation of equipment for filling and emptying transport tanks
Do you want to learn how to assemble scaffolding efficiently and safely?
Welding of optical fibers
BTT Mechanical - Warsaw and all over Poland 
Training for a forklift operator
(FAW) Fire Awareness - Warsaw and entire Poland
MOBILE CRANES - UDT COURSE IN HANDLING
Filling training for portable tanks
Rail crane qualifications - become an operator or maintainer
Operation and maintenance of mobile platforms course
Advanced Rescue Training - Warsaw and entire Poland 
Telescopic loader service
GWO certified wind training 
Course for aerial work platforms and scissor lifts with a certificate entitling you to work abroad
Equipment for the disabled - maintenance course
(SLS) Slinger Signaller - Warsaw and all over Poland 
INSTALLATION OF FLANGED JOINTS - We train from scratch
Sea Survival - Warsaw and all over Poland 
Course for aerial work platforms 
Forklift course
Global Wind Organization Training - Questions and Answers
Manual Handling - Warsaw and all over Poland 
Manitou telehandler course
Compressor operation course
GWO First Aid - Warsaw and the whole of Poland 
Hanging mobile platforms course - operation
WELDING QUALIFICATIONS - PERSONAL TRAINING
Basic Safety Training Standard 
UDT licensing course
Stationary mobile platforms - a course for operators
Flange fitter course
Mast climbing work platforms - for operators
UDT COURSE FOR WAREHOUSE STACKER CRANE OPERATORS
Scissor lifts service - a course for operators
Specialised UDT course for backhoe loader operators
Fire protection - training 
Authorizations of the UDT WDT TDT
Authorization to repair and maintenance of UDT devices: a course with a state examination
Mobile platforms - mobile platforms (spiders) service course
UDT COURSE IN FORKLIFT TRUCK OPERATION
First aid
Fire training
Boiler and cooker stoker course
Altitude course
Construction machinery - vocational training
Forklift truck service
Repair of lifting equipment
UDT training for overhead cranes
Crane - basic information
Types of overhead cranes - division
Crane service - general OHS remarks
Dangerous situations while operating the crane
UDT exam for overhead cranes - questions
Safety training